<P><CODE><B>set/dx</B> Allow DX messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss11.103">11.103</A> <A HREF="adminmanual_en.html#toc11.103">set/dxgrid (0)</A>
+<H2><A NAME="ss11.103">11.103</A> <A HREF="adminmanual_en.html#toc11.103">set/dxcq (0)</A>
+</H2>
+
+<P><CODE><B>set/dxcq</B> Show CQ Zones on the end of DX announcements</CODE></P>
+
+<H2><A NAME="ss11.104">11.104</A> <A HREF="adminmanual_en.html#toc11.104">set/dxgrid (0)</A>
</H2>
<P><CODE><B>set/dxgrid</B> Allow QRA Grid Squares on the end of DX announcements</CODE></P>
-<H2><A NAME="ss11.104">11.104</A> <A HREF="adminmanual_en.html#toc11.104">set/dxnet <call> [<call>..] (5)</A>
+<H2><A NAME="ss11.105">11.105</A> <A HREF="adminmanual_en.html#toc11.105">set/dxitu (0)</A>
</H2>
-<P><CODE><B>set/dxnet <call> [<call>..]</B> Make the callsign an DXNet node</CODE></P>
+<P><CODE><B>set/dxitu</B> Show ITU Zones on the end of DX announcements</CODE></P>
-<H2><A NAME="ss11.105">11.105</A> <A HREF="adminmanual_en.html#toc11.105">set/dxstate (0)</A>
+<H2><A NAME="ss11.106">11.106</A> <A HREF="adminmanual_en.html#toc11.106">set/dxnet <call> [<call>..] (5)</A>
</H2>
-<P><CODE><B>set/dxstate</B> Allow US State info on the end of DX announcements</CODE></P>
+<P><CODE><B>set/dxnet <call> [<call>..]</B> Make the callsign an DXNet node</CODE></P>
-<H2><A NAME="ss11.106">11.106</A> <A HREF="adminmanual_en.html#toc11.106">set/echo (0)</A>
+<H2><A NAME="ss11.107">11.107</A> <A HREF="adminmanual_en.html#toc11.107">set/echo (0)</A>
</H2>
<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE></P>
-<H2><A NAME="ss11.107">11.107</A> <A HREF="adminmanual_en.html#toc11.107">set/email <email> ... (0)</A>
+<H2><A NAME="ss11.108">11.108</A> <A HREF="adminmanual_en.html#toc11.108">set/email <email> ... (0)</A>
</H2>
<P><CODE><B>set/email <email> ...</B> Set email address(es) and forward your personals</CODE></P>
-<H2><A NAME="ss11.108">11.108</A> <A HREF="adminmanual_en.html#toc11.108">set/here (0)</A>
+<H2><A NAME="ss11.109">11.109</A> <A HREF="adminmanual_en.html#toc11.109">set/here (0)</A>
</H2>
<P><CODE><B>set/here</B> Tell the system you are present at your terminal</CODE></P>
-<H2><A NAME="ss11.109">11.109</A> <A HREF="adminmanual_en.html#toc11.109">set/homenode <node> (0)</A>
+<H2><A NAME="ss11.110">11.110</A> <A HREF="adminmanual_en.html#toc11.110">set/homenode <node> (0)</A>
</H2>
<P><CODE><B>set/homenode <node> </B> Set your normal cluster callsign</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.110">11.110</A> <A HREF="adminmanual_en.html#toc11.110">set/hops <call> ann|spots|route|wwv|wcy <n> (8)</A>
+<H2><A NAME="ss11.111">11.111</A> <A HREF="adminmanual_en.html#toc11.111">set/hops <call> ann|spots|route|wwv|wcy <n> (8)</A>
</H2>
<P><CODE><B>set/hops <call> ann|spots|route|wwv|wcy <n></B> Set hop count </CODE></P>
-<H2><A NAME="ss11.111">11.111</A> <A HREF="adminmanual_en.html#toc11.111">set/language <lang> (0)</A>
+<H2><A NAME="ss11.112">11.112</A> <A HREF="adminmanual_en.html#toc11.112">set/language <lang> (0)</A>
</H2>
<P><CODE><B>set/language <lang></B> Set the language you want to use</CODE></P>
<P>You can select the language that you want the cluster to use. Currentlythe languages available are en (English), de (German), es (Spanish) and nl (Dutch).</P>
-<H2><A NAME="ss11.112">11.112</A> <A HREF="adminmanual_en.html#toc11.112">set/location <lat & long> (0)</A>
+<H2><A NAME="ss11.113">11.113</A> <A HREF="adminmanual_en.html#toc11.113">set/location <lat & long> (0)</A>
</H2>
<P><CODE><B>set/location <lat & long></B> Set your latitude and longitude</CODE></P>
-<H2><A NAME="ss11.113">11.113</A> <A HREF="adminmanual_en.html#toc11.113">set/logininfo (0)</A>
+<H2><A NAME="ss11.114">11.114</A> <A HREF="adminmanual_en.html#toc11.114">set/logininfo (0)</A>
</H2>
<P><CODE><B>set/logininfo</B> Inform when a station logs in locally</CODE></P>
-<H2><A NAME="ss11.114">11.114</A> <A HREF="adminmanual_en.html#toc11.114">set/name <your name> (0)</A>
+<H2><A NAME="ss11.115">11.115</A> <A HREF="adminmanual_en.html#toc11.115">set/name <your name> (0)</A>
</H2>
<P><CODE><B>set/name <your name></B> Set your name</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.115">11.115</A> <A HREF="adminmanual_en.html#toc11.115">set/node <call> [<call>..] (5)</A>
+<H2><A NAME="ss11.116">11.116</A> <A HREF="adminmanual_en.html#toc11.116">set/node <call> [<call>..] (5)</A>
</H2>
<P><CODE><B>set/node <call> [<call>..]</B> Make the callsign an AK1A cluster</CODE></P>
<P>Tell the system that the call(s) are to be treated as AK1A cluster andfed PC Protocol rather normal user commands.</P>
-<H2><A NAME="ss11.116">11.116</A> <A HREF="adminmanual_en.html#toc11.116">set/obscount <count> <call> (8)</A>
+<H2><A NAME="ss11.117">11.117</A> <A HREF="adminmanual_en.html#toc11.117">set/obscount <count> <call> (8)</A>
</H2>
<P><CODE><B>set/obscount <count> <call></B> Set the 'pump-up' obscelence PING counter </CODE></P>
<P>From 1.35 onwards neighbouring nodes are pinged at regular intervals (seeSET/PINGINTERVAL), usually 300 seconds or 5 minutes. There is a 'pump-up'counter which is decremented on every outgoing ping and then reset tothe 'obscount' value on every incoming ping. The default value of thisparameter is 2. What this means is that a neighbouring node will be pinged twice at (default) 300 second intervals and if no reply has been heard just beforewhat would be the third attempt, that node is disconnected.If a ping is heard then the obscount is reset to the full value. Usingdefault values, if a node has not responded to a ping within 15 minutes,it is disconnected.You can set this parameter between 1 and 9.It is STRONGLY recommended that you don't change the default.</P>
-<H2><A NAME="ss11.117">11.117</A> <A HREF="adminmanual_en.html#toc11.117">set/page <lines per page> (0)</A>
+<H2><A NAME="ss11.118">11.118</A> <A HREF="adminmanual_en.html#toc11.118">set/page <lines per page> (0)</A>
</H2>
<P><CODE><B>set/page <lines per page></B> Set the lines per page</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
The setting is stored in your user profile.</P>
-<H2><A NAME="ss11.118">11.118</A> <A HREF="adminmanual_en.html#toc11.118">set/password (0)</A>
+<H2><A NAME="ss11.119">11.119</A> <A HREF="adminmanual_en.html#toc11.119">set/password (0)</A>
</H2>
<P><CODE><B>set/password</B> Set your own password</CODE></P>
<P>This command only works for a 'telnet' user (currently). It willonly work if you have a password already set. This initial passwordcan only be set by the sysop.When you execute this command it will ask you for your old password,then ask you to type in your new password twice (to make sure youget it right). You may or may not see the data echoed on the screenas you type, depending on the type of telnet client you have.</P>
-<H2><A NAME="ss11.119">11.119</A> <A HREF="adminmanual_en.html#toc11.119">set/prompt <string> (0)</A>
+<H2><A NAME="ss11.120">11.120</A> <A HREF="adminmanual_en.html#toc11.120">set/prompt <string> (0)</A>
</H2>
<P><CODE><B>set/prompt <string></B> Set your prompt to <string></CODE></P>
-<H2><A NAME="ss11.120">11.120</A> <A HREF="adminmanual_en.html#toc11.120">set/qra <locator> (0)</A>
+<H2><A NAME="ss11.121">11.121</A> <A HREF="adminmanual_en.html#toc11.121">set/qra <locator> (0)</A>
</H2>
<P><CODE><B>set/qra <locator></B> Set your QRA Grid locator</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.121">11.121</A> <A HREF="adminmanual_en.html#toc11.121">set/qth <your qth> (0)</A>
+<H2><A NAME="ss11.122">11.122</A> <A HREF="adminmanual_en.html#toc11.122">set/qth <your qth> (0)</A>
</H2>
<P><CODE><B>set/qth <your qth></B> Set your QTH</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.122">11.122</A> <A HREF="adminmanual_en.html#toc11.122">set/spider <call> [<call>..] (5)</A>
+<H2><A NAME="ss11.123">11.123</A> <A HREF="adminmanual_en.html#toc11.123">set/spider <call> [<call>..] (5)</A>
</H2>
<P><CODE><B>set/spider <call> [<call>..]</B> Make the callsign an DXSpider node</CODE></P>
<P>Tell the system that the call(s) are to be treated as DXSpider node andfed new style DX Protocol rather normal user commands.</P>
-<H2><A NAME="ss11.123">11.123</A> <A HREF="adminmanual_en.html#toc11.123">set/talk (0)</A>
+<H2><A NAME="ss11.124">11.124</A> <A HREF="adminmanual_en.html#toc11.124">set/talk (0)</A>
</H2>
<P><CODE><B>set/talk</B> Allow TALK messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss11.124">11.124</A> <A HREF="adminmanual_en.html#toc11.124">set/wcy (0)</A>
+<H2><A NAME="ss11.125">11.125</A> <A HREF="adminmanual_en.html#toc11.125">set/usstate (0)</A>
+</H2>
+
+<P><CODE><B>set/usstate</B> Allow US State info on the end of DX announcements</CODE></P>
+
+<H2><A NAME="ss11.126">11.126</A> <A HREF="adminmanual_en.html#toc11.126">set/wcy (0)</A>
</H2>
<P><CODE><B>set/wcy</B> Allow WCY messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss11.125">11.125</A> <A HREF="adminmanual_en.html#toc11.125">set/wwv (0)</A>
+<H2><A NAME="ss11.127">11.127</A> <A HREF="adminmanual_en.html#toc11.127">set/wwv (0)</A>
</H2>
<P><CODE><B>set/wwv</B> Allow WWV messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss11.126">11.126</A> <A HREF="adminmanual_en.html#toc11.126">set/wx (0)</A>
+<H2><A NAME="ss11.128">11.128</A> <A HREF="adminmanual_en.html#toc11.128">set/wx (0)</A>
</H2>
<P><CODE><B>set/wx</B> Allow WX messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss11.127">11.127</A> <A HREF="adminmanual_en.html#toc11.127">show/baddx (1)</A>
+<H2><A NAME="ss11.129">11.129</A> <A HREF="adminmanual_en.html#toc11.129">show/baddx (1)</A>
</H2>
<P><CODE><B>show/baddx</B> Show all the bad dx calls in the system</CODE></P>
<P>Display all the bad dx callsigns in the system, see SET/BADDXfor more information.</P>
-<H2><A NAME="ss11.128">11.128</A> <A HREF="adminmanual_en.html#toc11.128">show/badnode (1)</A>
+<H2><A NAME="ss11.130">11.130</A> <A HREF="adminmanual_en.html#toc11.130">show/badnode (1)</A>
</H2>
<P><CODE><B>show/badnode</B> Show all the bad nodes in the system</CODE></P>
<P>Display all the bad node callsigns in the system, see SET/BADNODEfor more information.</P>
-<H2><A NAME="ss11.129">11.129</A> <A HREF="adminmanual_en.html#toc11.129">show/badspotter (1)</A>
+<H2><A NAME="ss11.131">11.131</A> <A HREF="adminmanual_en.html#toc11.131">show/badspotter (1)</A>
</H2>
<P><CODE><B>show/badspotter</B> Show all the bad spotters in the system</CODE></P>
<P>Display all the bad spotter's callsigns in the system, see SET/BADSPOTTERfor more information.</P>
-<H2><A NAME="ss11.130">11.130</A> <A HREF="adminmanual_en.html#toc11.130">show/badword (1)</A>
+<H2><A NAME="ss11.132">11.132</A> <A HREF="adminmanual_en.html#toc11.132">show/badword (1)</A>
</H2>
<P><CODE><B>show/badword</B> Show all the bad words in the system</CODE></P>
<P>Display all the bad words in the system, see SET/BADWORDfor more information.</P>
-<H2><A NAME="ss11.131">11.131</A> <A HREF="adminmanual_en.html#toc11.131">show/configuration [<node>] (0)</A>
+<H2><A NAME="ss11.133">11.133</A> <A HREF="adminmanual_en.html#toc11.133">show/configuration [<node>] (0)</A>
</H2>
<P><CODE><B>show/configuration [<node>]</B> Show all the nodes and users visible</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.132">11.132</A> <A HREF="adminmanual_en.html#toc11.132">show/configuration/node (0)</A>
+<H2><A NAME="ss11.134">11.134</A> <A HREF="adminmanual_en.html#toc11.134">show/configuration/node (0)</A>
</H2>
<P><CODE><B>show/configuration/node</B> Show all the nodes connected locally</CODE></P>
<P>Show all the nodes connected to this node.</P>
-<H2><A NAME="ss11.133">11.133</A> <A HREF="adminmanual_en.html#toc11.133">show/connect (1)</A>
+<H2><A NAME="ss11.135">11.135</A> <A HREF="adminmanual_en.html#toc11.135">show/connect (1)</A>
</H2>
<P><CODE><B>show/connect</B> Show all the active connections</CODE></P>
<P>This command shows information on all the active connections known tothe node. This command gives slightly more information than WHO.</P>
-<H2><A NAME="ss11.134">11.134</A> <A HREF="adminmanual_en.html#toc11.134">show/date [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.136">11.136</A> <A HREF="adminmanual_en.html#toc11.136">show/date [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/date [<prefix>|<callsign>]</B> Show the local time </CODE></P>
<P>This is very nearly the same as SHOW/TIME, the only difference the formatof the date string if no arguments are given.If no prefixes or callsigns are given then this command returns the localtime and UTC as the computer has it right now. If you give some prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss11.135">11.135</A> <A HREF="adminmanual_en.html#toc11.135">show/db0sdx <callsign> (0)</A>
+<H2><A NAME="ss11.137">11.137</A> <A HREF="adminmanual_en.html#toc11.137">show/db0sdx <callsign> (0)</A>
</H2>
<P><CODE><B>show/db0sdx <callsign></B> Show QSL infomation from DB0SDX database</CODE></P>
<P>This command queries the DB0SDX QSL server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qslinfo.de.See also SHOW/QRZ, SHOW/WM7D.</P>
-<H2><A NAME="ss11.136">11.136</A> <A HREF="adminmanual_en.html#toc11.136">show/dx (0)</A>
+<H2><A NAME="ss11.138">11.138</A> <A HREF="adminmanual_en.html#toc11.138">show/dx (0)</A>
</H2>
<P><CODE><B>show/dx</B> Interrogate the spot database</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.137">11.137</A> <A HREF="adminmanual_en.html#toc11.137">show/dxcc <prefix> (0)</A>
+<H2><A NAME="ss11.139">11.139</A> <A HREF="adminmanual_en.html#toc11.139">show/dxcc <prefix> (0)</A>
</H2>
<P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.138">11.138</A> <A HREF="adminmanual_en.html#toc11.138">show/dxstats [days] [date] (0)</A>
+<H2><A NAME="ss11.140">11.140</A> <A HREF="adminmanual_en.html#toc11.140">show/dxstats [days] [date] (0)</A>
</H2>
<P><CODE><B>show/dxstats [days] [date]</B> Show the DX Statistics</CODE></P>
<P>Show the total DX spots for the last <days> no of days (default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss11.139">11.139</A> <A HREF="adminmanual_en.html#toc11.139">show/files [<filearea> [<string>]] (0)</A>
+<H2><A NAME="ss11.141">11.141</A> <A HREF="adminmanual_en.html#toc11.141">show/files [<filearea> [<string>]] (0)</A>
</H2>
<P><CODE><B>show/files [<filearea> [<string>]]</B> List the contents of a filearea</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
See also TYPE - to see the contents of a file.</P>
-<H2><A NAME="ss11.140">11.140</A> <A HREF="adminmanual_en.html#toc11.140">show/filter (0)</A>
+<H2><A NAME="ss11.142">11.142</A> <A HREF="adminmanual_en.html#toc11.142">show/filter (0)</A>
</H2>
<P><CODE><B>show/filter</B> Show the contents of all the filters you have set</CODE></P>
<P>Show the contents of all the filters that are set. This command displaysall the filters set - for all the various categories.</P>
-<H2><A NAME="ss11.141">11.141</A> <A HREF="adminmanual_en.html#toc11.141">show/hfstats [days] [date] (0)</A>
+<H2><A NAME="ss11.143">11.143</A> <A HREF="adminmanual_en.html#toc11.143">show/hfstats [days] [date] (0)</A>
</H2>
<P><CODE><B>show/hfstats [days] [date]</B> Show the HF DX Statistics </CODE></P>
<P>Show the HF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss11.142">11.142</A> <A HREF="adminmanual_en.html#toc11.142">show/hftable [days] [date] [prefix ...] (0)</A>
+<H2><A NAME="ss11.144">11.144</A> <A HREF="adminmanual_en.html#toc11.144">show/hftable [days] [date] [prefix ...] (0)</A>
</H2>
<P><CODE><B>show/hftable [days] [date] [prefix ...]</B> Show the HF DX Spotter Table</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.143">11.143</A> <A HREF="adminmanual_en.html#toc11.143">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
+<H2><A NAME="ss11.145">11.145</A> <A HREF="adminmanual_en.html#toc11.145">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
</H2>
<P><CODE><B>show/hops <call> [ann|spots|route|wcy|wwv]</B> Show the hop counts for a node</CODE></P>
<P>This command shows the hop counts set up for a node. You can specifywhich category you want to see. If you leave the category out then all the categories will be listed.</P>
-<H2><A NAME="ss11.144">11.144</A> <A HREF="adminmanual_en.html#toc11.144">show/isolate (1)</A>
+<H2><A NAME="ss11.146">11.146</A> <A HREF="adminmanual_en.html#toc11.146">show/isolate (1)</A>
</H2>
<P><CODE><B>show/isolate</B> Show list of ISOLATED nodes</CODE></P>
-<H2><A NAME="ss11.145">11.145</A> <A HREF="adminmanual_en.html#toc11.145">show/log [<callsign>] (8)</A>
+<H2><A NAME="ss11.147">11.147</A> <A HREF="adminmanual_en.html#toc11.147">show/log [<callsign>] (8)</A>
</H2>
<P><CODE><B>show/log [<callsign>]</B> Show excerpts from the system log</CODE></P>
<P>This command outputs a short section of the system log. On its ownit will output a general logfile. With the optional callsign it willshow output from the log associated with that callsign.</P>
-<H2><A NAME="ss11.146">11.146</A> <A HREF="adminmanual_en.html#toc11.146">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.148">11.148</A> <A HREF="adminmanual_en.html#toc11.148">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/moon [ndays] [<prefix>|<callsign>]</B> Show Moon rise and set times</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
Upto 366 days can be checked both in the past and in the future.Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.</P>
-<H2><A NAME="ss11.147">11.147</A> <A HREF="adminmanual_en.html#toc11.147">show/muf <prefix> [<hours>][long] (0)</A>
+<H2><A NAME="ss11.149">11.149</A> <A HREF="adminmanual_en.html#toc11.149">show/muf <prefix> [<hours>][long] (0)</A>
</H2>
<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show the likely propagation to a prefix</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
Gives you an estimate of the long path propagation characterics. Itshould be noted that the figures will probably not be very useful, norterrible accurate, but it is included for completeness.</P>
-<H2><A NAME="ss11.148">11.148</A> <A HREF="adminmanual_en.html#toc11.148">show/newconfiguration [<node>] (0)</A>
+<H2><A NAME="ss11.150">11.150</A> <A HREF="adminmanual_en.html#toc11.150">show/newconfiguration [<node>] (0)</A>
</H2>
<P><CODE><B>show/newconfiguration [<node>]</B> Show all the nodes and users visible</CODE></P>
<P>This command allows you to see all the users that can be seenand the nodes to which they are connected. This command produces essentially the same information as SHOW/CONFIGURATION except that it shows all the duplication ofany routes that might be present It also uses a different formatwhich may not take up quite as much space if you don't have anyloops.BE WARNED: the list that is returned can be VERY long</P>
-<H2><A NAME="ss11.149">11.149</A> <A HREF="adminmanual_en.html#toc11.149">show/newconfiguration/node (0)</A>
+<H2><A NAME="ss11.151">11.151</A> <A HREF="adminmanual_en.html#toc11.151">show/newconfiguration/node (0)</A>
</H2>
<P><CODE><B>show/newconfiguration/node</B> Show all the nodes connected locally</CODE></P>
<P>Show all the nodes connected to this node in the new format.</P>
-<H2><A NAME="ss11.150">11.150</A> <A HREF="adminmanual_en.html#toc11.150">show/node [<callsign> ...] (1)</A>
+<H2><A NAME="ss11.152">11.152</A> <A HREF="adminmanual_en.html#toc11.152">show/node [<callsign> ...] (1)</A>
</H2>
<P><CODE><B>show/node [<callsign> ...]</B> Show the type and version number of nodes</CODE></P>
<P>Show the type and version (if connected) of the nodes specified on thecommand line. If no callsigns are specified then a sorted list of allthe non-user callsigns known to the system will be displayed.</P>
-<H2><A NAME="ss11.151">11.151</A> <A HREF="adminmanual_en.html#toc11.151">show/prefix <callsign> (0)</A>
+<H2><A NAME="ss11.153">11.153</A> <A HREF="adminmanual_en.html#toc11.153">show/prefix <callsign> (0)</A>
</H2>
<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database </CODE></P>
<P>This command takes the <callsign> (which can be a full or partial callsign or a prefix), looks up which internal country number it is and then displays all the relevant prefixes for that countrytogether with the internal country no, the CQ and ITU regions. See also SHOW/DXCC</P>
-<H2><A NAME="ss11.152">11.152</A> <A HREF="adminmanual_en.html#toc11.152">show/program (5)</A>
+<H2><A NAME="ss11.154">11.154</A> <A HREF="adminmanual_en.html#toc11.154">show/program (5)</A>
</H2>
<P><CODE><B>show/program</B> Show the locations of all the included program modules</CODE></P>
<P>Show the name and location where every program module was load from. Thisis useful for checking where you think you have loaded a .pm file from. </P>
-<H2><A NAME="ss11.153">11.153</A> <A HREF="adminmanual_en.html#toc11.153">show/qra <lat> <long> (0)</A>
+<H2><A NAME="ss11.155">11.155</A> <A HREF="adminmanual_en.html#toc11.155">show/qra <lat> <long> (0)</A>
</H2>
<P><CODE><B>show/qra <lat> <long></B> Convert lat/long to a QRA Grid locator</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.154">11.154</A> <A HREF="adminmanual_en.html#toc11.154">show/qra <locator> [<locator>] (0)</A>
+<H2><A NAME="ss11.156">11.156</A> <A HREF="adminmanual_en.html#toc11.156">show/qra <locator> [<locator>] (0)</A>
</H2>
<P><CODE><B>show/qra <locator> [<locator>]</B> Show distance between QRA Grid locators</CODE></P>
-<H2><A NAME="ss11.155">11.155</A> <A HREF="adminmanual_en.html#toc11.155">show/qrz <callsign> (0)</A>
+<H2><A NAME="ss11.157">11.157</A> <A HREF="adminmanual_en.html#toc11.157">show/qrz <callsign> (0)</A>
</H2>
<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
<P>This command queries the QRZ callbook server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qrz.com See also SHOW/WM7D for an alternative.</P>
-<H2><A NAME="ss11.156">11.156</A> <A HREF="adminmanual_en.html#toc11.156">show/route <callsign> ... (0)</A>
+<H2><A NAME="ss11.158">11.158</A> <A HREF="adminmanual_en.html#toc11.158">show/route <callsign> ... (0)</A>
</H2>
<P><CODE><B>show/route <callsign> ...</B> Show the route to the callsign</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.157">11.157</A> <A HREF="adminmanual_en.html#toc11.157">show/satellite <name> [<hours> <interval>] (0)</A>
+<H2><A NAME="ss11.159">11.159</A> <A HREF="adminmanual_en.html#toc11.159">show/satellite <name> [<hours> <interval>] (0)</A>
</H2>
<P><CODE><B>show/satellite <name> [<hours> <interval>]</B> Show tracking data</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.158">11.158</A> <A HREF="adminmanual_en.html#toc11.158">show/station all [<regex>] (6)</A>
+<H2><A NAME="ss11.160">11.160</A> <A HREF="adminmanual_en.html#toc11.160">show/station all [<regex>] (6)</A>
</H2>
<P><CODE><B>show/station all [<regex>]</B> Show list of users in the system</CODE></P>
-<H2><A NAME="ss11.159">11.159</A> <A HREF="adminmanual_en.html#toc11.159">show/station [<callsign> ..] (0)</A>
+<H2><A NAME="ss11.161">11.161</A> <A HREF="adminmanual_en.html#toc11.161">show/station [<callsign> ..] (0)</A>
</H2>
<P><CODE><B>show/station [<callsign> ..]</B> Show information about a callsign</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
If no callsign is given then show the information for yourself.</P>
-<H2><A NAME="ss11.160">11.160</A> <A HREF="adminmanual_en.html#toc11.160">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.162">11.162</A> <A HREF="adminmanual_en.html#toc11.162">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/sun [ndays] [<prefix>|<callsign>]</B> Show sun rise and set times</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
Upto 366 days can be checked both in the past and in the future.Please note that the rise and set times are given as the UT times of rise and set on the requested UT day.</P>
-<H2><A NAME="ss11.161">11.161</A> <A HREF="adminmanual_en.html#toc11.161">show/time [<prefix>|<callsign>] (0)</A>
+<H2><A NAME="ss11.163">11.163</A> <A HREF="adminmanual_en.html#toc11.163">show/time [<prefix>|<callsign>] (0)</A>
</H2>
<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show the local time </CODE></P>
<P>If no prefixes or callsigns are given then this command returns the localtime and UTC as the computer has it right now. If you give some prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss11.162">11.162</A> <A HREF="adminmanual_en.html#toc11.162">show/usdb [call ..] (0)</A>
+<H2><A NAME="ss11.164">11.164</A> <A HREF="adminmanual_en.html#toc11.164">show/usdb [call ..] (0)</A>
</H2>
<P><CODE><B>show/usdb [call ..]</B> Show information held on the FCC Call database</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.163">11.163</A> <A HREF="adminmanual_en.html#toc11.163">show/vhfstats [days] [date] (0)</A>
+<H2><A NAME="ss11.165">11.165</A> <A HREF="adminmanual_en.html#toc11.165">show/vhfstats [days] [date] (0)</A>
</H2>
<P><CODE><B>show/vhfstats [days] [date]</B> Show the VHF DX Statistics</CODE></P>
<P>Show the VHF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a date (default: today).</P>
-<H2><A NAME="ss11.164">11.164</A> <A HREF="adminmanual_en.html#toc11.164">show/vhftable [days] [date] [prefix ...] (0)</A>
+<H2><A NAME="ss11.166">11.166</A> <A HREF="adminmanual_en.html#toc11.166">show/vhftable [days] [date] [prefix ...] (0)</A>
</H2>
<P><CODE><B>show/vhftable [days] [date] [prefix ...]</B> Show the VHF DX Spotter Table</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.165">11.165</A> <A HREF="adminmanual_en.html#toc11.165">show/wcy (0)</A>
+<H2><A NAME="ss11.167">11.167</A> <A HREF="adminmanual_en.html#toc11.167">show/wcy (0)</A>
</H2>
<P><CODE><B>show/wcy</B> Show last 10 WCY broadcasts</CODE></P>
-<H2><A NAME="ss11.166">11.166</A> <A HREF="adminmanual_en.html#toc11.166">show/wcy <n> (0)</A>
+<H2><A NAME="ss11.168">11.168</A> <A HREF="adminmanual_en.html#toc11.168">show/wcy <n> (0)</A>
</H2>
<P><CODE><B>show/wcy <n></B> Show last <n> WCY broadcasts</CODE></P>
<P>Display the most recent WCY information that has been received by the system</P>
-<H2><A NAME="ss11.167">11.167</A> <A HREF="adminmanual_en.html#toc11.167">show/wm7d <callsign> (0)</A>
+<H2><A NAME="ss11.169">11.169</A> <A HREF="adminmanual_en.html#toc11.169">show/wm7d <callsign> (0)</A>
</H2>
<P><CODE><B>show/wm7d <callsign></B> Show callbook details on a US callsigns</CODE></P>
<P>This command queries the WM7D callbook server on the internetand returns any information available for that US callsign. This serviceis provided for users of this software by http://www.wm7d.net.See also SHOW/QRZ. </P>
-<H2><A NAME="ss11.168">11.168</A> <A HREF="adminmanual_en.html#toc11.168">show/wwv (0)</A>
+<H2><A NAME="ss11.170">11.170</A> <A HREF="adminmanual_en.html#toc11.170">show/wwv (0)</A>
</H2>
<P><CODE><B>show/wwv</B> Show last 10 WWV broadcasts</CODE></P>
-<H2><A NAME="ss11.169">11.169</A> <A HREF="adminmanual_en.html#toc11.169">show/wwv <n> (0)</A>
+<H2><A NAME="ss11.171">11.171</A> <A HREF="adminmanual_en.html#toc11.171">show/wwv <n> (0)</A>
</H2>
<P><CODE><B>show/wwv <n></B> Show last <n> WWV broadcasts</CODE></P>
<P>Display the most recent WWV information that has been received by the system</P>
-<H2><A NAME="ss11.170">11.170</A> <A HREF="adminmanual_en.html#toc11.170">shutdown (5)</A>
+<H2><A NAME="ss11.172">11.172</A> <A HREF="adminmanual_en.html#toc11.172">shutdown (5)</A>
</H2>
<P><CODE><B>shutdown</B> Shutdown the cluster</CODE></P>
<P>Shutdown the cluster and disconnect all the users </P>
-<H2><A NAME="ss11.171">11.171</A> <A HREF="adminmanual_en.html#toc11.171">stat/channel [<callsign>] (5)</A>
+<H2><A NAME="ss11.173">11.173</A> <A HREF="adminmanual_en.html#toc11.173">stat/channel [<callsign>] (5)</A>
</H2>
<P><CODE><B>stat/channel [<callsign>]</B> Show the status of a channel on the cluster</CODE></P>
<P>Show the internal status of the channel object either for the channel that you are on or else for the callsign that you asked for.Only the fields that are defined (in perl term) will be displayed.</P>
-<H2><A NAME="ss11.172">11.172</A> <A HREF="adminmanual_en.html#toc11.172">stat/db <dbname> (5)</A>
+<H2><A NAME="ss11.174">11.174</A> <A HREF="adminmanual_en.html#toc11.174">stat/db <dbname> (5)</A>
</H2>
<P><CODE><B>stat/db <dbname></B> Show the status of a database</CODE></P>
<P>Show the internal status of a database descriptor.Depending on your privilege level you will see more or less information. This command is unlikely to be of much use to anyone other than a sysop.</P>
-<H2><A NAME="ss11.173">11.173</A> <A HREF="adminmanual_en.html#toc11.173">stat/msg (1)</A>
+<H2><A NAME="ss11.175">11.175</A> <A HREF="adminmanual_en.html#toc11.175">stat/msg (1)</A>
</H2>
<P><CODE><B>stat/msg</B> Show the status of the message system</CODE></P>
-<H2><A NAME="ss11.174">11.174</A> <A HREF="adminmanual_en.html#toc11.174">stat/msg <msgno> (1)</A>
+<H2><A NAME="ss11.176">11.176</A> <A HREF="adminmanual_en.html#toc11.176">stat/msg <msgno> (1)</A>
</H2>
<P><CODE><B>stat/msg <msgno></B> Show the status of a message</CODE></P>
<P>This command shows the internal status of a message and includes informationsuch as to whom it has been forwarded, its size, origin etc etc.If no message number is given then the status of the message system is displayed.</P>
-<H2><A NAME="ss11.175">11.175</A> <A HREF="adminmanual_en.html#toc11.175">stat/route_node <callsign> (5)</A>
+<H2><A NAME="ss11.177">11.177</A> <A HREF="adminmanual_en.html#toc11.177">stat/route_node <callsign> (5)</A>
</H2>
<P><CODE><B>stat/route_node <callsign></B> Show the data in a Route::Node object</CODE></P>
-<H2><A NAME="ss11.176">11.176</A> <A HREF="adminmanual_en.html#toc11.176">stat/route_node all (5)</A>
+<H2><A NAME="ss11.178">11.178</A> <A HREF="adminmanual_en.html#toc11.178">stat/route_node all (5)</A>
</H2>
<P><CODE><B>stat/route_node all</B> Show list of all Route::Node objects</CODE></P>
-<H2><A NAME="ss11.177">11.177</A> <A HREF="adminmanual_en.html#toc11.177">stat/route_user <callsign> (5)</A>
+<H2><A NAME="ss11.179">11.179</A> <A HREF="adminmanual_en.html#toc11.179">stat/route_user <callsign> (5)</A>
</H2>
<P><CODE><B>stat/route_user <callsign></B> Show the data in a Route::User object</CODE></P>
-<H2><A NAME="ss11.178">11.178</A> <A HREF="adminmanual_en.html#toc11.178">stat/route_user all (5)</A>
+<H2><A NAME="ss11.180">11.180</A> <A HREF="adminmanual_en.html#toc11.180">stat/route_user all (5)</A>
</H2>
<P><CODE><B>stat/route_user all</B> Show list of all Route::User objects</CODE></P>
-<H2><A NAME="ss11.179">11.179</A> <A HREF="adminmanual_en.html#toc11.179">stat/user [<callsign>] (5)</A>
+<H2><A NAME="ss11.181">11.181</A> <A HREF="adminmanual_en.html#toc11.181">stat/user [<callsign>] (5)</A>
</H2>
<P><CODE><B>stat/user [<callsign>]</B> Show the full status of a user</CODE></P>
<P>Shows the full contents of a user record including all the secret flagsand stuff.Only the fields that are defined (in perl term) will be displayed.</P>
-<H2><A NAME="ss11.180">11.180</A> <A HREF="adminmanual_en.html#toc11.180">sysop (0)</A>
+<H2><A NAME="ss11.182">11.182</A> <A HREF="adminmanual_en.html#toc11.182">sysop (0)</A>
</H2>
<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
They will all match. If there is no password you will still be offerednumbers but nothing will happen when you input a string. Any match iscase sensitive.</P>
-<H2><A NAME="ss11.181">11.181</A> <A HREF="adminmanual_en.html#toc11.181">talk <call> > <node> [<text>] (0)</A>
+<H2><A NAME="ss11.183">11.183</A> <A HREF="adminmanual_en.html#toc11.183">talk <call> > <node> [<text>] (0)</A>
</H2>
<P><CODE><B>talk <call> > <node> [<text>]</B> Send a text message to another station via a node</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will send the hftable as you have it to all the people you are currently talking to.</P>
-<H2><A NAME="ss11.182">11.182</A> <A HREF="adminmanual_en.html#toc11.182">talk <call> [<text>] (0)</A>
+<H2><A NAME="ss11.184">11.184</A> <A HREF="adminmanual_en.html#toc11.184">talk <call> [<text>] (0)</A>
</H2>
<P><CODE><B>talk <call> [<text>]</B> Send a text message to another station</CODE></P>
-<H2><A NAME="ss11.183">11.183</A> <A HREF="adminmanual_en.html#toc11.183">type <filearea>/<name> (0)</A>
+<H2><A NAME="ss11.185">11.185</A> <A HREF="adminmanual_en.html#toc11.185">type <filearea>/<name> (0)</A>
</H2>
<P><CODE><B>type <filearea>/<name></B> Look at the contents of a file in one of the fileareas</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
See also SHOW/FILES to see what fileareas are available and a list of content.</P>
-<H2><A NAME="ss11.184">11.184</A> <A HREF="adminmanual_en.html#toc11.184">uncatchup <node call> all|[msgno> ...] (5)</A>
+<H2><A NAME="ss11.186">11.186</A> <A HREF="adminmanual_en.html#toc11.186">uncatchup <node call> all|[msgno> ...] (5)</A>
</H2>
<P><CODE><B>uncatchup <node call> all|[msgno> ...]</B> Unmark a message as sent</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
which will arrange for them to be forward candidates again.Order is not important.</P>
-<H2><A NAME="ss11.185">11.185</A> <A HREF="adminmanual_en.html#toc11.185">unset/announce (0)</A>
+<H2><A NAME="ss11.187">11.187</A> <A HREF="adminmanual_en.html#toc11.187">unset/announce (0)</A>
</H2>
<P><CODE><B>unset/announce</B> Stop announce messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.186">11.186</A> <A HREF="adminmanual_en.html#toc11.186">unset/anntalk (0)</A>
+<H2><A NAME="ss11.188">11.188</A> <A HREF="adminmanual_en.html#toc11.188">unset/anntalk (0)</A>
</H2>
<P><CODE><B>unset/anntalk</B> Stop talk like announce messages on your terminal</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
allows you to see them again. This is the default.</P>
-<H2><A NAME="ss11.187">11.187</A> <A HREF="adminmanual_en.html#toc11.187">unset/baddx <call>.. (8)</A>
+<H2><A NAME="ss11.189">11.189</A> <A HREF="adminmanual_en.html#toc11.189">unset/baddx <call>.. (8)</A>
</H2>
<P><CODE><B>unset/baddx <call>..</B> Propagate a dx spot with this callsign again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.188">11.188</A> <A HREF="adminmanual_en.html#toc11.188">unset/badnode <call>.. (8)</A>
+<H2><A NAME="ss11.190">11.190</A> <A HREF="adminmanual_en.html#toc11.190">unset/badnode <call>.. (8)</A>
</H2>
<P><CODE><B>unset/badnode <call>..</B> Allow spots from this node again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will allow spots from him again.Use with extreme care. This command may well be superceeded by FILTERing.</P>
-<H2><A NAME="ss11.189">11.189</A> <A HREF="adminmanual_en.html#toc11.189">unset/badspotter <call>.. (8)</A>
+<H2><A NAME="ss11.191">11.191</A> <A HREF="adminmanual_en.html#toc11.191">unset/badspotter <call>.. (8)</A>
</H2>
<P><CODE><B>unset/badspotter <call>..</B> Allow spots from this callsign again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will allow spots from him again.Use with extreme care. This command may well be superceded by FILTERing.</P>
-<H2><A NAME="ss11.190">11.190</A> <A HREF="adminmanual_en.html#toc11.190">unset/badword <word>.. (8)</A>
+<H2><A NAME="ss11.192">11.192</A> <A HREF="adminmanual_en.html#toc11.192">unset/badword <word>.. (8)</A>
</H2>
<P><CODE><B>unset/badword <word>..</B> Propagate things with this word again</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
will allow text with this word again.</P>
-<H2><A NAME="ss11.191">11.191</A> <A HREF="adminmanual_en.html#toc11.191">unset/beep (0)</A>
+<H2><A NAME="ss11.193">11.193</A> <A HREF="adminmanual_en.html#toc11.193">unset/beep (0)</A>
</H2>
<P><CODE><B>unset/beep</B> Stop beeps for DX and other messages on your terminal</CODE></P>
-<H2><A NAME="ss11.192">11.192</A> <A HREF="adminmanual_en.html#toc11.192">unset/dx (0)</A>
+<H2><A NAME="ss11.194">11.194</A> <A HREF="adminmanual_en.html#toc11.194">unset/dx (0)</A>
</H2>
<P><CODE><B>unset/dx</B> Stop DX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.193">11.193</A> <A HREF="adminmanual_en.html#toc11.193">unset/dxgrid (0)</A>
+<H2><A NAME="ss11.195">11.195</A> <A HREF="adminmanual_en.html#toc11.195">unset/dxcq (0)</A>
+</H2>
+
+<P><CODE><B>unset/dxcq</B> Stop CQ Zones on the end of DX announcements</CODE></P>
+<P>Display both the Spotter's and the Spotted's CQ Zone on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. The Spotter's CQ is on the RHS of the time, the Spotted's CQ is on the LHS.Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.196">11.196</A> <A HREF="adminmanual_en.html#toc11.196">unset/dxgrid (0)</A>
</H2>
<P><CODE><B>unset/dxgrid</B> Stop QRA Grid Squares on the end of DX announcements</CODE></P>
-<P>A standard feature which is enabled in version 1.43 and above is that if the spotter's grid square is known it is output on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. You can use this command to reset (or set)this feature.</P>
-<H2><A NAME="ss11.194">11.194</A> <A HREF="adminmanual_en.html#toc11.194">unset/dxstate (0)</A>
+<P>A standard feature which is enabled in version 1.43 and above is that if the spotter's grid square is known it is output on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. You can use this command to reset (or set)this feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.197">11.197</A> <A HREF="adminmanual_en.html#toc11.197">unset/dxitu (0)</A>
</H2>
-<P><CODE><B>unset/dxstate</B> Stop US State info on the end of DX announcements</CODE></P>
-<P>If the spotter's or spotted's US State is known it is output on the end of a DX announcement (there is just enough room). A spotter's state will appear on the RHS of the time (like SET/DXGRID) and the spotted's State will appear on the LHS of thetime field. Any information found will override any locator information from SET/DXGRID.Some user programs cannot cope with this. You can use this command to reset (or set) this feature.</P>
-<H2><A NAME="ss11.195">11.195</A> <A HREF="adminmanual_en.html#toc11.195">unset/echo (0)</A>
+<P><CODE><B>unset/dxitu</B> Stop ITU Zones on the end of DX announcements</CODE></P>
+<P>Display both the Spotter's and the Spotted's ITU Zone on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. The Spotter's ITU is on the RHS of the time, the Spotted's ITU is on the LHS.Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.198">11.198</A> <A HREF="adminmanual_en.html#toc11.198">unset/echo (0)</A>
</H2>
<P><CODE><B>unset/echo</B> Stop the cluster echoing your input</CODE></P>
<P>If you are connected via a telnet session, different implimentationsof telnet handle echo differently depending on whether you are connected via port 23 or some other port. You can use this commandto change the setting appropriately. The setting is stored in your user profile.YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
-<H2><A NAME="ss11.196">11.196</A> <A HREF="adminmanual_en.html#toc11.196">unset/email (0)</A>
+<H2><A NAME="ss11.199">11.199</A> <A HREF="adminmanual_en.html#toc11.199">unset/email (0)</A>
</H2>
<P><CODE><B>unset/email</B> Stop personal msgs being forwarded by email</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.197">11.197</A> <A HREF="adminmanual_en.html#toc11.197">unset/here (0)</A>
+<H2><A NAME="ss11.200">11.200</A> <A HREF="adminmanual_en.html#toc11.200">unset/here (0)</A>
</H2>
<P><CODE><B>unset/here</B> Tell the system you are absent from your terminal</CODE></P>
-<H2><A NAME="ss11.198">11.198</A> <A HREF="adminmanual_en.html#toc11.198">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
+<H2><A NAME="ss11.201">11.201</A> <A HREF="adminmanual_en.html#toc11.201">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
</H2>
<P><CODE><B>unset/hops <call> ann|spots|route|wwv|wcy</B> Unset hop count </CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss11.199">11.199</A> <A HREF="adminmanual_en.html#toc11.199">unset/logininfo (0)</A>
+<H2><A NAME="ss11.202">11.202</A> <A HREF="adminmanual_en.html#toc11.202">unset/logininfo (0)</A>
</H2>
<P><CODE><B>unset/logininfo</B> Inform when a station logs out locally</CODE></P>
-<H2><A NAME="ss11.200">11.200</A> <A HREF="adminmanual_en.html#toc11.200">unset/privilege (0)</A>
+<H2><A NAME="ss11.203">11.203</A> <A HREF="adminmanual_en.html#toc11.203">unset/privilege (0)</A>
</H2>
<P><CODE><B>unset/privilege</B> Remove any privilege for this session</CODE></P>
<P>You can use this command to 'protect' this session from unauthoriseduse. If you want to get your normal privilege back you will need toeither logout and login again (if you are on a console) or use theSYSOP command.</P>
-<H2><A NAME="ss11.201">11.201</A> <A HREF="adminmanual_en.html#toc11.201">unset/prompt (0)</A>
+<H2><A NAME="ss11.204">11.204</A> <A HREF="adminmanual_en.html#toc11.204">unset/prompt (0)</A>
</H2>
<P><CODE><B>unset/prompt</B> Set your prompt back to default</CODE></P>
</PRE>
</CODE></BLOCKQUOTE>
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back tonormal.</P>
-<H2><A NAME="ss11.202">11.202</A> <A HREF="adminmanual_en.html#toc11.202">unset/talk (0)</A>
+<H2><A NAME="ss11.205">11.205</A> <A HREF="adminmanual_en.html#toc11.205">unset/talk (0)</A>
</H2>
<P><CODE><B>unset/talk</B> Stop TALK messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.203">11.203</A> <A HREF="adminmanual_en.html#toc11.203">unset/wcy (0)</A>
+<H2><A NAME="ss11.206">11.206</A> <A HREF="adminmanual_en.html#toc11.206">unset/usstate (0)</A>
+</H2>
+
+<P><CODE><B>unset/usstate</B> Stop US State info on the end of DX announcements</CODE></P>
+<P>If the spotter's or spotted's US State is known it is output on the end of a DX announcement (there is just enough room). A spotter's state will appear on the RHS of the time (like SET/DXGRID) and the spotted's State will appear on the LHS of thetime field. Any information found will override any locator information from SET/DXGRID.Some user programs cannot cope with this. You can use this command to reset (or set) this feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss11.207">11.207</A> <A HREF="adminmanual_en.html#toc11.207">unset/wcy (0)</A>
</H2>
<P><CODE><B>unset/wcy</B> Stop WCY messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.204">11.204</A> <A HREF="adminmanual_en.html#toc11.204">unset/wwv (0)</A>
+<H2><A NAME="ss11.208">11.208</A> <A HREF="adminmanual_en.html#toc11.208">unset/wwv (0)</A>
</H2>
<P><CODE><B>unset/wwv</B> Stop WWV messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.205">11.205</A> <A HREF="adminmanual_en.html#toc11.205">unset/wx (0)</A>
+<H2><A NAME="ss11.209">11.209</A> <A HREF="adminmanual_en.html#toc11.209">unset/wx (0)</A>
</H2>
<P><CODE><B>unset/wx</B> Stop WX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss11.206">11.206</A> <A HREF="adminmanual_en.html#toc11.206">who (0)</A>
+<H2><A NAME="ss11.210">11.210</A> <A HREF="adminmanual_en.html#toc11.210">who (0)</A>
</H2>
<P><CODE><B>who</B> Show who is physically connected</CODE></P>
<P>This is a quick listing that shows which callsigns are connected andwhat sort of connection they have</P>
-<H2><A NAME="ss11.207">11.207</A> <A HREF="adminmanual_en.html#toc11.207">wx <text> (0)</A>
+<H2><A NAME="ss11.211">11.211</A> <A HREF="adminmanual_en.html#toc11.211">wx <text> (0)</A>
</H2>
<P><CODE><B>wx <text></B> Send a weather message to local users</CODE></P>
-<H2><A NAME="ss11.208">11.208</A> <A HREF="adminmanual_en.html#toc11.208">wx full <text> (0)</A>
+<H2><A NAME="ss11.212">11.212</A> <A HREF="adminmanual_en.html#toc11.212">wx full <text> (0)</A>
</H2>
<P><CODE><B>wx full <text></B> Send a weather message to all cluster users</CODE></P>
-<H2><A NAME="ss11.209">11.209</A> <A HREF="adminmanual_en.html#toc11.209">wx sysop <text> (5)</A>
+<H2><A NAME="ss11.213">11.213</A> <A HREF="adminmanual_en.html#toc11.213">wx sysop <text> (5)</A>
</H2>
<P><CODE><B>wx sysop <text></B> Send a weather message to other clusters only</CODE></P>
<LI><A NAME="toc11.100">11.100</A> <A HREF="adminmanual_en-11.html#ss11.100">set/beep (0)</A>
<LI><A NAME="toc11.101">11.101</A> <A HREF="adminmanual_en-11.html#ss11.101">set/clx <call> [<call>..] (5)</A>
<LI><A NAME="toc11.102">11.102</A> <A HREF="adminmanual_en-11.html#ss11.102">set/dx (0)</A>
-<LI><A NAME="toc11.103">11.103</A> <A HREF="adminmanual_en-11.html#ss11.103">set/dxgrid (0)</A>
-<LI><A NAME="toc11.104">11.104</A> <A HREF="adminmanual_en-11.html#ss11.104">set/dxnet <call> [<call>..] (5)</A>
-<LI><A NAME="toc11.105">11.105</A> <A HREF="adminmanual_en-11.html#ss11.105">set/dxstate (0)</A>
-<LI><A NAME="toc11.106">11.106</A> <A HREF="adminmanual_en-11.html#ss11.106">set/echo (0)</A>
-<LI><A NAME="toc11.107">11.107</A> <A HREF="adminmanual_en-11.html#ss11.107">set/email <email> ... (0)</A>
-<LI><A NAME="toc11.108">11.108</A> <A HREF="adminmanual_en-11.html#ss11.108">set/here (0)</A>
-<LI><A NAME="toc11.109">11.109</A> <A HREF="adminmanual_en-11.html#ss11.109">set/homenode <node> (0)</A>
-<LI><A NAME="toc11.110">11.110</A> <A HREF="adminmanual_en-11.html#ss11.110">set/hops <call> ann|spots|route|wwv|wcy <n> (8)</A>
-<LI><A NAME="toc11.111">11.111</A> <A HREF="adminmanual_en-11.html#ss11.111">set/language <lang> (0)</A>
-<LI><A NAME="toc11.112">11.112</A> <A HREF="adminmanual_en-11.html#ss11.112">set/location <lat & long> (0)</A>
-<LI><A NAME="toc11.113">11.113</A> <A HREF="adminmanual_en-11.html#ss11.113">set/logininfo (0)</A>
-<LI><A NAME="toc11.114">11.114</A> <A HREF="adminmanual_en-11.html#ss11.114">set/name <your name> (0)</A>
-<LI><A NAME="toc11.115">11.115</A> <A HREF="adminmanual_en-11.html#ss11.115">set/node <call> [<call>..] (5)</A>
-<LI><A NAME="toc11.116">11.116</A> <A HREF="adminmanual_en-11.html#ss11.116">set/obscount <count> <call> (8)</A>
-<LI><A NAME="toc11.117">11.117</A> <A HREF="adminmanual_en-11.html#ss11.117">set/page <lines per page> (0)</A>
-<LI><A NAME="toc11.118">11.118</A> <A HREF="adminmanual_en-11.html#ss11.118">set/password (0)</A>
-<LI><A NAME="toc11.119">11.119</A> <A HREF="adminmanual_en-11.html#ss11.119">set/prompt <string> (0)</A>
-<LI><A NAME="toc11.120">11.120</A> <A HREF="adminmanual_en-11.html#ss11.120">set/qra <locator> (0)</A>
-<LI><A NAME="toc11.121">11.121</A> <A HREF="adminmanual_en-11.html#ss11.121">set/qth <your qth> (0)</A>
-<LI><A NAME="toc11.122">11.122</A> <A HREF="adminmanual_en-11.html#ss11.122">set/spider <call> [<call>..] (5)</A>
-<LI><A NAME="toc11.123">11.123</A> <A HREF="adminmanual_en-11.html#ss11.123">set/talk (0)</A>
-<LI><A NAME="toc11.124">11.124</A> <A HREF="adminmanual_en-11.html#ss11.124">set/wcy (0)</A>
-<LI><A NAME="toc11.125">11.125</A> <A HREF="adminmanual_en-11.html#ss11.125">set/wwv (0)</A>
-<LI><A NAME="toc11.126">11.126</A> <A HREF="adminmanual_en-11.html#ss11.126">set/wx (0)</A>
-<LI><A NAME="toc11.127">11.127</A> <A HREF="adminmanual_en-11.html#ss11.127">show/baddx (1)</A>
-<LI><A NAME="toc11.128">11.128</A> <A HREF="adminmanual_en-11.html#ss11.128">show/badnode (1)</A>
-<LI><A NAME="toc11.129">11.129</A> <A HREF="adminmanual_en-11.html#ss11.129">show/badspotter (1)</A>
-<LI><A NAME="toc11.130">11.130</A> <A HREF="adminmanual_en-11.html#ss11.130">show/badword (1)</A>
-<LI><A NAME="toc11.131">11.131</A> <A HREF="adminmanual_en-11.html#ss11.131">show/configuration [<node>] (0)</A>
-<LI><A NAME="toc11.132">11.132</A> <A HREF="adminmanual_en-11.html#ss11.132">show/configuration/node (0)</A>
-<LI><A NAME="toc11.133">11.133</A> <A HREF="adminmanual_en-11.html#ss11.133">show/connect (1)</A>
-<LI><A NAME="toc11.134">11.134</A> <A HREF="adminmanual_en-11.html#ss11.134">show/date [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.135">11.135</A> <A HREF="adminmanual_en-11.html#ss11.135">show/db0sdx <callsign> (0)</A>
-<LI><A NAME="toc11.136">11.136</A> <A HREF="adminmanual_en-11.html#ss11.136">show/dx (0)</A>
-<LI><A NAME="toc11.137">11.137</A> <A HREF="adminmanual_en-11.html#ss11.137">show/dxcc <prefix> (0)</A>
-<LI><A NAME="toc11.138">11.138</A> <A HREF="adminmanual_en-11.html#ss11.138">show/dxstats [days] [date] (0)</A>
-<LI><A NAME="toc11.139">11.139</A> <A HREF="adminmanual_en-11.html#ss11.139">show/files [<filearea> [<string>]] (0)</A>
-<LI><A NAME="toc11.140">11.140</A> <A HREF="adminmanual_en-11.html#ss11.140">show/filter (0)</A>
-<LI><A NAME="toc11.141">11.141</A> <A HREF="adminmanual_en-11.html#ss11.141">show/hfstats [days] [date] (0)</A>
-<LI><A NAME="toc11.142">11.142</A> <A HREF="adminmanual_en-11.html#ss11.142">show/hftable [days] [date] [prefix ...] (0)</A>
-<LI><A NAME="toc11.143">11.143</A> <A HREF="adminmanual_en-11.html#ss11.143">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
-<LI><A NAME="toc11.144">11.144</A> <A HREF="adminmanual_en-11.html#ss11.144">show/isolate (1)</A>
-<LI><A NAME="toc11.145">11.145</A> <A HREF="adminmanual_en-11.html#ss11.145">show/log [<callsign>] (8)</A>
-<LI><A NAME="toc11.146">11.146</A> <A HREF="adminmanual_en-11.html#ss11.146">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.147">11.147</A> <A HREF="adminmanual_en-11.html#ss11.147">show/muf <prefix> [<hours>][long] (0)</A>
-<LI><A NAME="toc11.148">11.148</A> <A HREF="adminmanual_en-11.html#ss11.148">show/newconfiguration [<node>] (0)</A>
-<LI><A NAME="toc11.149">11.149</A> <A HREF="adminmanual_en-11.html#ss11.149">show/newconfiguration/node (0)</A>
-<LI><A NAME="toc11.150">11.150</A> <A HREF="adminmanual_en-11.html#ss11.150">show/node [<callsign> ...] (1)</A>
-<LI><A NAME="toc11.151">11.151</A> <A HREF="adminmanual_en-11.html#ss11.151">show/prefix <callsign> (0)</A>
-<LI><A NAME="toc11.152">11.152</A> <A HREF="adminmanual_en-11.html#ss11.152">show/program (5)</A>
-<LI><A NAME="toc11.153">11.153</A> <A HREF="adminmanual_en-11.html#ss11.153">show/qra <lat> <long> (0)</A>
-<LI><A NAME="toc11.154">11.154</A> <A HREF="adminmanual_en-11.html#ss11.154">show/qra <locator> [<locator>] (0)</A>
-<LI><A NAME="toc11.155">11.155</A> <A HREF="adminmanual_en-11.html#ss11.155">show/qrz <callsign> (0)</A>
-<LI><A NAME="toc11.156">11.156</A> <A HREF="adminmanual_en-11.html#ss11.156">show/route <callsign> ... (0)</A>
-<LI><A NAME="toc11.157">11.157</A> <A HREF="adminmanual_en-11.html#ss11.157">show/satellite <name> [<hours> <interval>] (0)</A>
-<LI><A NAME="toc11.158">11.158</A> <A HREF="adminmanual_en-11.html#ss11.158">show/station all [<regex>] (6)</A>
-<LI><A NAME="toc11.159">11.159</A> <A HREF="adminmanual_en-11.html#ss11.159">show/station [<callsign> ..] (0)</A>
-<LI><A NAME="toc11.160">11.160</A> <A HREF="adminmanual_en-11.html#ss11.160">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.161">11.161</A> <A HREF="adminmanual_en-11.html#ss11.161">show/time [<prefix>|<callsign>] (0)</A>
-<LI><A NAME="toc11.162">11.162</A> <A HREF="adminmanual_en-11.html#ss11.162">show/usdb [call ..] (0)</A>
-<LI><A NAME="toc11.163">11.163</A> <A HREF="adminmanual_en-11.html#ss11.163">show/vhfstats [days] [date] (0)</A>
-<LI><A NAME="toc11.164">11.164</A> <A HREF="adminmanual_en-11.html#ss11.164">show/vhftable [days] [date] [prefix ...] (0)</A>
-<LI><A NAME="toc11.165">11.165</A> <A HREF="adminmanual_en-11.html#ss11.165">show/wcy (0)</A>
-<LI><A NAME="toc11.166">11.166</A> <A HREF="adminmanual_en-11.html#ss11.166">show/wcy <n> (0)</A>
-<LI><A NAME="toc11.167">11.167</A> <A HREF="adminmanual_en-11.html#ss11.167">show/wm7d <callsign> (0)</A>
-<LI><A NAME="toc11.168">11.168</A> <A HREF="adminmanual_en-11.html#ss11.168">show/wwv (0)</A>
-<LI><A NAME="toc11.169">11.169</A> <A HREF="adminmanual_en-11.html#ss11.169">show/wwv <n> (0)</A>
-<LI><A NAME="toc11.170">11.170</A> <A HREF="adminmanual_en-11.html#ss11.170">shutdown (5)</A>
-<LI><A NAME="toc11.171">11.171</A> <A HREF="adminmanual_en-11.html#ss11.171">stat/channel [<callsign>] (5)</A>
-<LI><A NAME="toc11.172">11.172</A> <A HREF="adminmanual_en-11.html#ss11.172">stat/db <dbname> (5)</A>
-<LI><A NAME="toc11.173">11.173</A> <A HREF="adminmanual_en-11.html#ss11.173">stat/msg (1)</A>
-<LI><A NAME="toc11.174">11.174</A> <A HREF="adminmanual_en-11.html#ss11.174">stat/msg <msgno> (1)</A>
-<LI><A NAME="toc11.175">11.175</A> <A HREF="adminmanual_en-11.html#ss11.175">stat/route_node <callsign> (5)</A>
-<LI><A NAME="toc11.176">11.176</A> <A HREF="adminmanual_en-11.html#ss11.176">stat/route_node all (5)</A>
-<LI><A NAME="toc11.177">11.177</A> <A HREF="adminmanual_en-11.html#ss11.177">stat/route_user <callsign> (5)</A>
-<LI><A NAME="toc11.178">11.178</A> <A HREF="adminmanual_en-11.html#ss11.178">stat/route_user all (5)</A>
-<LI><A NAME="toc11.179">11.179</A> <A HREF="adminmanual_en-11.html#ss11.179">stat/user [<callsign>] (5)</A>
-<LI><A NAME="toc11.180">11.180</A> <A HREF="adminmanual_en-11.html#ss11.180">sysop (0)</A>
-<LI><A NAME="toc11.181">11.181</A> <A HREF="adminmanual_en-11.html#ss11.181">talk <call> > <node> [<text>] (0)</A>
-<LI><A NAME="toc11.182">11.182</A> <A HREF="adminmanual_en-11.html#ss11.182">talk <call> [<text>] (0)</A>
-<LI><A NAME="toc11.183">11.183</A> <A HREF="adminmanual_en-11.html#ss11.183">type <filearea>/<name> (0)</A>
-<LI><A NAME="toc11.184">11.184</A> <A HREF="adminmanual_en-11.html#ss11.184">uncatchup <node call> all|[msgno> ...] (5)</A>
-<LI><A NAME="toc11.185">11.185</A> <A HREF="adminmanual_en-11.html#ss11.185">unset/announce (0)</A>
-<LI><A NAME="toc11.186">11.186</A> <A HREF="adminmanual_en-11.html#ss11.186">unset/anntalk (0)</A>
-<LI><A NAME="toc11.187">11.187</A> <A HREF="adminmanual_en-11.html#ss11.187">unset/baddx <call>.. (8)</A>
-<LI><A NAME="toc11.188">11.188</A> <A HREF="adminmanual_en-11.html#ss11.188">unset/badnode <call>.. (8)</A>
-<LI><A NAME="toc11.189">11.189</A> <A HREF="adminmanual_en-11.html#ss11.189">unset/badspotter <call>.. (8)</A>
-<LI><A NAME="toc11.190">11.190</A> <A HREF="adminmanual_en-11.html#ss11.190">unset/badword <word>.. (8)</A>
-<LI><A NAME="toc11.191">11.191</A> <A HREF="adminmanual_en-11.html#ss11.191">unset/beep (0)</A>
-<LI><A NAME="toc11.192">11.192</A> <A HREF="adminmanual_en-11.html#ss11.192">unset/dx (0)</A>
-<LI><A NAME="toc11.193">11.193</A> <A HREF="adminmanual_en-11.html#ss11.193">unset/dxgrid (0)</A>
-<LI><A NAME="toc11.194">11.194</A> <A HREF="adminmanual_en-11.html#ss11.194">unset/dxstate (0)</A>
-<LI><A NAME="toc11.195">11.195</A> <A HREF="adminmanual_en-11.html#ss11.195">unset/echo (0)</A>
-<LI><A NAME="toc11.196">11.196</A> <A HREF="adminmanual_en-11.html#ss11.196">unset/email (0)</A>
-<LI><A NAME="toc11.197">11.197</A> <A HREF="adminmanual_en-11.html#ss11.197">unset/here (0)</A>
-<LI><A NAME="toc11.198">11.198</A> <A HREF="adminmanual_en-11.html#ss11.198">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
-<LI><A NAME="toc11.199">11.199</A> <A HREF="adminmanual_en-11.html#ss11.199">unset/logininfo (0)</A>
-<LI><A NAME="toc11.200">11.200</A> <A HREF="adminmanual_en-11.html#ss11.200">unset/privilege (0)</A>
-<LI><A NAME="toc11.201">11.201</A> <A HREF="adminmanual_en-11.html#ss11.201">unset/prompt (0)</A>
-<LI><A NAME="toc11.202">11.202</A> <A HREF="adminmanual_en-11.html#ss11.202">unset/talk (0)</A>
-<LI><A NAME="toc11.203">11.203</A> <A HREF="adminmanual_en-11.html#ss11.203">unset/wcy (0)</A>
-<LI><A NAME="toc11.204">11.204</A> <A HREF="adminmanual_en-11.html#ss11.204">unset/wwv (0)</A>
-<LI><A NAME="toc11.205">11.205</A> <A HREF="adminmanual_en-11.html#ss11.205">unset/wx (0)</A>
-<LI><A NAME="toc11.206">11.206</A> <A HREF="adminmanual_en-11.html#ss11.206">who (0)</A>
-<LI><A NAME="toc11.207">11.207</A> <A HREF="adminmanual_en-11.html#ss11.207">wx <text> (0)</A>
-<LI><A NAME="toc11.208">11.208</A> <A HREF="adminmanual_en-11.html#ss11.208">wx full <text> (0)</A>
-<LI><A NAME="toc11.209">11.209</A> <A HREF="adminmanual_en-11.html#ss11.209">wx sysop <text> (5)</A>
+<LI><A NAME="toc11.103">11.103</A> <A HREF="adminmanual_en-11.html#ss11.103">set/dxcq (0)</A>
+<LI><A NAME="toc11.104">11.104</A> <A HREF="adminmanual_en-11.html#ss11.104">set/dxgrid (0)</A>
+<LI><A NAME="toc11.105">11.105</A> <A HREF="adminmanual_en-11.html#ss11.105">set/dxitu (0)</A>
+<LI><A NAME="toc11.106">11.106</A> <A HREF="adminmanual_en-11.html#ss11.106">set/dxnet <call> [<call>..] (5)</A>
+<LI><A NAME="toc11.107">11.107</A> <A HREF="adminmanual_en-11.html#ss11.107">set/echo (0)</A>
+<LI><A NAME="toc11.108">11.108</A> <A HREF="adminmanual_en-11.html#ss11.108">set/email <email> ... (0)</A>
+<LI><A NAME="toc11.109">11.109</A> <A HREF="adminmanual_en-11.html#ss11.109">set/here (0)</A>
+<LI><A NAME="toc11.110">11.110</A> <A HREF="adminmanual_en-11.html#ss11.110">set/homenode <node> (0)</A>
+<LI><A NAME="toc11.111">11.111</A> <A HREF="adminmanual_en-11.html#ss11.111">set/hops <call> ann|spots|route|wwv|wcy <n> (8)</A>
+<LI><A NAME="toc11.112">11.112</A> <A HREF="adminmanual_en-11.html#ss11.112">set/language <lang> (0)</A>
+<LI><A NAME="toc11.113">11.113</A> <A HREF="adminmanual_en-11.html#ss11.113">set/location <lat & long> (0)</A>
+<LI><A NAME="toc11.114">11.114</A> <A HREF="adminmanual_en-11.html#ss11.114">set/logininfo (0)</A>
+<LI><A NAME="toc11.115">11.115</A> <A HREF="adminmanual_en-11.html#ss11.115">set/name <your name> (0)</A>
+<LI><A NAME="toc11.116">11.116</A> <A HREF="adminmanual_en-11.html#ss11.116">set/node <call> [<call>..] (5)</A>
+<LI><A NAME="toc11.117">11.117</A> <A HREF="adminmanual_en-11.html#ss11.117">set/obscount <count> <call> (8)</A>
+<LI><A NAME="toc11.118">11.118</A> <A HREF="adminmanual_en-11.html#ss11.118">set/page <lines per page> (0)</A>
+<LI><A NAME="toc11.119">11.119</A> <A HREF="adminmanual_en-11.html#ss11.119">set/password (0)</A>
+<LI><A NAME="toc11.120">11.120</A> <A HREF="adminmanual_en-11.html#ss11.120">set/prompt <string> (0)</A>
+<LI><A NAME="toc11.121">11.121</A> <A HREF="adminmanual_en-11.html#ss11.121">set/qra <locator> (0)</A>
+<LI><A NAME="toc11.122">11.122</A> <A HREF="adminmanual_en-11.html#ss11.122">set/qth <your qth> (0)</A>
+<LI><A NAME="toc11.123">11.123</A> <A HREF="adminmanual_en-11.html#ss11.123">set/spider <call> [<call>..] (5)</A>
+<LI><A NAME="toc11.124">11.124</A> <A HREF="adminmanual_en-11.html#ss11.124">set/talk (0)</A>
+<LI><A NAME="toc11.125">11.125</A> <A HREF="adminmanual_en-11.html#ss11.125">set/usstate (0)</A>
+<LI><A NAME="toc11.126">11.126</A> <A HREF="adminmanual_en-11.html#ss11.126">set/wcy (0)</A>
+<LI><A NAME="toc11.127">11.127</A> <A HREF="adminmanual_en-11.html#ss11.127">set/wwv (0)</A>
+<LI><A NAME="toc11.128">11.128</A> <A HREF="adminmanual_en-11.html#ss11.128">set/wx (0)</A>
+<LI><A NAME="toc11.129">11.129</A> <A HREF="adminmanual_en-11.html#ss11.129">show/baddx (1)</A>
+<LI><A NAME="toc11.130">11.130</A> <A HREF="adminmanual_en-11.html#ss11.130">show/badnode (1)</A>
+<LI><A NAME="toc11.131">11.131</A> <A HREF="adminmanual_en-11.html#ss11.131">show/badspotter (1)</A>
+<LI><A NAME="toc11.132">11.132</A> <A HREF="adminmanual_en-11.html#ss11.132">show/badword (1)</A>
+<LI><A NAME="toc11.133">11.133</A> <A HREF="adminmanual_en-11.html#ss11.133">show/configuration [<node>] (0)</A>
+<LI><A NAME="toc11.134">11.134</A> <A HREF="adminmanual_en-11.html#ss11.134">show/configuration/node (0)</A>
+<LI><A NAME="toc11.135">11.135</A> <A HREF="adminmanual_en-11.html#ss11.135">show/connect (1)</A>
+<LI><A NAME="toc11.136">11.136</A> <A HREF="adminmanual_en-11.html#ss11.136">show/date [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.137">11.137</A> <A HREF="adminmanual_en-11.html#ss11.137">show/db0sdx <callsign> (0)</A>
+<LI><A NAME="toc11.138">11.138</A> <A HREF="adminmanual_en-11.html#ss11.138">show/dx (0)</A>
+<LI><A NAME="toc11.139">11.139</A> <A HREF="adminmanual_en-11.html#ss11.139">show/dxcc <prefix> (0)</A>
+<LI><A NAME="toc11.140">11.140</A> <A HREF="adminmanual_en-11.html#ss11.140">show/dxstats [days] [date] (0)</A>
+<LI><A NAME="toc11.141">11.141</A> <A HREF="adminmanual_en-11.html#ss11.141">show/files [<filearea> [<string>]] (0)</A>
+<LI><A NAME="toc11.142">11.142</A> <A HREF="adminmanual_en-11.html#ss11.142">show/filter (0)</A>
+<LI><A NAME="toc11.143">11.143</A> <A HREF="adminmanual_en-11.html#ss11.143">show/hfstats [days] [date] (0)</A>
+<LI><A NAME="toc11.144">11.144</A> <A HREF="adminmanual_en-11.html#ss11.144">show/hftable [days] [date] [prefix ...] (0)</A>
+<LI><A NAME="toc11.145">11.145</A> <A HREF="adminmanual_en-11.html#ss11.145">show/hops <call> [ann|spots|route|wcy|wwv] (8)</A>
+<LI><A NAME="toc11.146">11.146</A> <A HREF="adminmanual_en-11.html#ss11.146">show/isolate (1)</A>
+<LI><A NAME="toc11.147">11.147</A> <A HREF="adminmanual_en-11.html#ss11.147">show/log [<callsign>] (8)</A>
+<LI><A NAME="toc11.148">11.148</A> <A HREF="adminmanual_en-11.html#ss11.148">show/moon [ndays] [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.149">11.149</A> <A HREF="adminmanual_en-11.html#ss11.149">show/muf <prefix> [<hours>][long] (0)</A>
+<LI><A NAME="toc11.150">11.150</A> <A HREF="adminmanual_en-11.html#ss11.150">show/newconfiguration [<node>] (0)</A>
+<LI><A NAME="toc11.151">11.151</A> <A HREF="adminmanual_en-11.html#ss11.151">show/newconfiguration/node (0)</A>
+<LI><A NAME="toc11.152">11.152</A> <A HREF="adminmanual_en-11.html#ss11.152">show/node [<callsign> ...] (1)</A>
+<LI><A NAME="toc11.153">11.153</A> <A HREF="adminmanual_en-11.html#ss11.153">show/prefix <callsign> (0)</A>
+<LI><A NAME="toc11.154">11.154</A> <A HREF="adminmanual_en-11.html#ss11.154">show/program (5)</A>
+<LI><A NAME="toc11.155">11.155</A> <A HREF="adminmanual_en-11.html#ss11.155">show/qra <lat> <long> (0)</A>
+<LI><A NAME="toc11.156">11.156</A> <A HREF="adminmanual_en-11.html#ss11.156">show/qra <locator> [<locator>] (0)</A>
+<LI><A NAME="toc11.157">11.157</A> <A HREF="adminmanual_en-11.html#ss11.157">show/qrz <callsign> (0)</A>
+<LI><A NAME="toc11.158">11.158</A> <A HREF="adminmanual_en-11.html#ss11.158">show/route <callsign> ... (0)</A>
+<LI><A NAME="toc11.159">11.159</A> <A HREF="adminmanual_en-11.html#ss11.159">show/satellite <name> [<hours> <interval>] (0)</A>
+<LI><A NAME="toc11.160">11.160</A> <A HREF="adminmanual_en-11.html#ss11.160">show/station all [<regex>] (6)</A>
+<LI><A NAME="toc11.161">11.161</A> <A HREF="adminmanual_en-11.html#ss11.161">show/station [<callsign> ..] (0)</A>
+<LI><A NAME="toc11.162">11.162</A> <A HREF="adminmanual_en-11.html#ss11.162">show/sun [ndays] [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.163">11.163</A> <A HREF="adminmanual_en-11.html#ss11.163">show/time [<prefix>|<callsign>] (0)</A>
+<LI><A NAME="toc11.164">11.164</A> <A HREF="adminmanual_en-11.html#ss11.164">show/usdb [call ..] (0)</A>
+<LI><A NAME="toc11.165">11.165</A> <A HREF="adminmanual_en-11.html#ss11.165">show/vhfstats [days] [date] (0)</A>
+<LI><A NAME="toc11.166">11.166</A> <A HREF="adminmanual_en-11.html#ss11.166">show/vhftable [days] [date] [prefix ...] (0)</A>
+<LI><A NAME="toc11.167">11.167</A> <A HREF="adminmanual_en-11.html#ss11.167">show/wcy (0)</A>
+<LI><A NAME="toc11.168">11.168</A> <A HREF="adminmanual_en-11.html#ss11.168">show/wcy <n> (0)</A>
+<LI><A NAME="toc11.169">11.169</A> <A HREF="adminmanual_en-11.html#ss11.169">show/wm7d <callsign> (0)</A>
+<LI><A NAME="toc11.170">11.170</A> <A HREF="adminmanual_en-11.html#ss11.170">show/wwv (0)</A>
+<LI><A NAME="toc11.171">11.171</A> <A HREF="adminmanual_en-11.html#ss11.171">show/wwv <n> (0)</A>
+<LI><A NAME="toc11.172">11.172</A> <A HREF="adminmanual_en-11.html#ss11.172">shutdown (5)</A>
+<LI><A NAME="toc11.173">11.173</A> <A HREF="adminmanual_en-11.html#ss11.173">stat/channel [<callsign>] (5)</A>
+<LI><A NAME="toc11.174">11.174</A> <A HREF="adminmanual_en-11.html#ss11.174">stat/db <dbname> (5)</A>
+<LI><A NAME="toc11.175">11.175</A> <A HREF="adminmanual_en-11.html#ss11.175">stat/msg (1)</A>
+<LI><A NAME="toc11.176">11.176</A> <A HREF="adminmanual_en-11.html#ss11.176">stat/msg <msgno> (1)</A>
+<LI><A NAME="toc11.177">11.177</A> <A HREF="adminmanual_en-11.html#ss11.177">stat/route_node <callsign> (5)</A>
+<LI><A NAME="toc11.178">11.178</A> <A HREF="adminmanual_en-11.html#ss11.178">stat/route_node all (5)</A>
+<LI><A NAME="toc11.179">11.179</A> <A HREF="adminmanual_en-11.html#ss11.179">stat/route_user <callsign> (5)</A>
+<LI><A NAME="toc11.180">11.180</A> <A HREF="adminmanual_en-11.html#ss11.180">stat/route_user all (5)</A>
+<LI><A NAME="toc11.181">11.181</A> <A HREF="adminmanual_en-11.html#ss11.181">stat/user [<callsign>] (5)</A>
+<LI><A NAME="toc11.182">11.182</A> <A HREF="adminmanual_en-11.html#ss11.182">sysop (0)</A>
+<LI><A NAME="toc11.183">11.183</A> <A HREF="adminmanual_en-11.html#ss11.183">talk <call> > <node> [<text>] (0)</A>
+<LI><A NAME="toc11.184">11.184</A> <A HREF="adminmanual_en-11.html#ss11.184">talk <call> [<text>] (0)</A>
+<LI><A NAME="toc11.185">11.185</A> <A HREF="adminmanual_en-11.html#ss11.185">type <filearea>/<name> (0)</A>
+<LI><A NAME="toc11.186">11.186</A> <A HREF="adminmanual_en-11.html#ss11.186">uncatchup <node call> all|[msgno> ...] (5)</A>
+<LI><A NAME="toc11.187">11.187</A> <A HREF="adminmanual_en-11.html#ss11.187">unset/announce (0)</A>
+<LI><A NAME="toc11.188">11.188</A> <A HREF="adminmanual_en-11.html#ss11.188">unset/anntalk (0)</A>
+<LI><A NAME="toc11.189">11.189</A> <A HREF="adminmanual_en-11.html#ss11.189">unset/baddx <call>.. (8)</A>
+<LI><A NAME="toc11.190">11.190</A> <A HREF="adminmanual_en-11.html#ss11.190">unset/badnode <call>.. (8)</A>
+<LI><A NAME="toc11.191">11.191</A> <A HREF="adminmanual_en-11.html#ss11.191">unset/badspotter <call>.. (8)</A>
+<LI><A NAME="toc11.192">11.192</A> <A HREF="adminmanual_en-11.html#ss11.192">unset/badword <word>.. (8)</A>
+<LI><A NAME="toc11.193">11.193</A> <A HREF="adminmanual_en-11.html#ss11.193">unset/beep (0)</A>
+<LI><A NAME="toc11.194">11.194</A> <A HREF="adminmanual_en-11.html#ss11.194">unset/dx (0)</A>
+<LI><A NAME="toc11.195">11.195</A> <A HREF="adminmanual_en-11.html#ss11.195">unset/dxcq (0)</A>
+<LI><A NAME="toc11.196">11.196</A> <A HREF="adminmanual_en-11.html#ss11.196">unset/dxgrid (0)</A>
+<LI><A NAME="toc11.197">11.197</A> <A HREF="adminmanual_en-11.html#ss11.197">unset/dxitu (0)</A>
+<LI><A NAME="toc11.198">11.198</A> <A HREF="adminmanual_en-11.html#ss11.198">unset/echo (0)</A>
+<LI><A NAME="toc11.199">11.199</A> <A HREF="adminmanual_en-11.html#ss11.199">unset/email (0)</A>
+<LI><A NAME="toc11.200">11.200</A> <A HREF="adminmanual_en-11.html#ss11.200">unset/here (0)</A>
+<LI><A NAME="toc11.201">11.201</A> <A HREF="adminmanual_en-11.html#ss11.201">unset/hops <call> ann|spots|route|wwv|wcy (8)</A>
+<LI><A NAME="toc11.202">11.202</A> <A HREF="adminmanual_en-11.html#ss11.202">unset/logininfo (0)</A>
+<LI><A NAME="toc11.203">11.203</A> <A HREF="adminmanual_en-11.html#ss11.203">unset/privilege (0)</A>
+<LI><A NAME="toc11.204">11.204</A> <A HREF="adminmanual_en-11.html#ss11.204">unset/prompt (0)</A>
+<LI><A NAME="toc11.205">11.205</A> <A HREF="adminmanual_en-11.html#ss11.205">unset/talk (0)</A>
+<LI><A NAME="toc11.206">11.206</A> <A HREF="adminmanual_en-11.html#ss11.206">unset/usstate (0)</A>
+<LI><A NAME="toc11.207">11.207</A> <A HREF="adminmanual_en-11.html#ss11.207">unset/wcy (0)</A>
+<LI><A NAME="toc11.208">11.208</A> <A HREF="adminmanual_en-11.html#ss11.208">unset/wwv (0)</A>
+<LI><A NAME="toc11.209">11.209</A> <A HREF="adminmanual_en-11.html#ss11.209">unset/wx (0)</A>
+<LI><A NAME="toc11.210">11.210</A> <A HREF="adminmanual_en-11.html#ss11.210">who (0)</A>
+<LI><A NAME="toc11.211">11.211</A> <A HREF="adminmanual_en-11.html#ss11.211">wx <text> (0)</A>
+<LI><A NAME="toc11.212">11.212</A> <A HREF="adminmanual_en-11.html#ss11.212">wx full <text> (0)</A>
+<LI><A NAME="toc11.213">11.213</A> <A HREF="adminmanual_en-11.html#ss11.213">wx sysop <text> (5)</A>
</UL>
<HR>
<A HREF="adminmanual_en-1.html">Next</A>
<P><CODE><B>set/dx</B> Allow DX messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss12.59">12.59</A> <A HREF="usermanual_en.html#toc12.59">set/dxgrid</A>
+<H2><A NAME="ss12.59">12.59</A> <A HREF="usermanual_en.html#toc12.59">set/dxcq</A>
+</H2>
+
+<P><CODE><B>set/dxcq</B> Show CQ Zones on the end of DX announcements</CODE></P>
+
+
+<H2><A NAME="ss12.60">12.60</A> <A HREF="usermanual_en.html#toc12.60">set/dxgrid</A>
</H2>
<P><CODE><B>set/dxgrid</B> Allow QRA Grid Squares on the end of DX announcements</CODE></P>
-<H2><A NAME="ss12.60">12.60</A> <A HREF="usermanual_en.html#toc12.60">set/dxstate</A>
+<H2><A NAME="ss12.61">12.61</A> <A HREF="usermanual_en.html#toc12.61">set/dxitu</A>
</H2>
-<P><CODE><B>set/dxstate</B> Allow US State info on the end of DX announcements</CODE></P>
+<P><CODE><B>set/dxitu</B> Show ITU Zones on the end of DX announcements</CODE></P>
-<H2><A NAME="ss12.61">12.61</A> <A HREF="usermanual_en.html#toc12.61">set/echo</A>
+<H2><A NAME="ss12.62">12.62</A> <A HREF="usermanual_en.html#toc12.62">set/echo</A>
</H2>
<P><CODE><B>set/echo</B> Make the cluster echo your input</CODE></P>
-<H2><A NAME="ss12.62">12.62</A> <A HREF="usermanual_en.html#toc12.62">set/email <email> ...</A>
+<H2><A NAME="ss12.63">12.63</A> <A HREF="usermanual_en.html#toc12.63">set/email <email> ...</A>
</H2>
<P><CODE><B>set/email <email> ...</B> Set email address(es) and forward your personals</CODE></P>
-<H2><A NAME="ss12.63">12.63</A> <A HREF="usermanual_en.html#toc12.63">set/here</A>
+<H2><A NAME="ss12.64">12.64</A> <A HREF="usermanual_en.html#toc12.64">set/here</A>
</H2>
<P><CODE><B>set/here</B> Tell the system you are present at your terminal</CODE></P>
-<H2><A NAME="ss12.64">12.64</A> <A HREF="usermanual_en.html#toc12.64">set/homenode <node> </A>
+<H2><A NAME="ss12.65">12.65</A> <A HREF="usermanual_en.html#toc12.65">set/homenode <node> </A>
</H2>
<P><CODE><B>set/homenode <node> </B> Set your normal cluster callsign</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.65">12.65</A> <A HREF="usermanual_en.html#toc12.65">set/language <lang></A>
+<H2><A NAME="ss12.66">12.66</A> <A HREF="usermanual_en.html#toc12.66">set/language <lang></A>
</H2>
<P><CODE><B>set/language <lang></B> Set the language you want to use</CODE></P>
<P>You can select the language that you want the cluster to use. Currently
the languages available are en (English), de (German), es (Spanish)
and nl (Dutch).</P>
-<H2><A NAME="ss12.66">12.66</A> <A HREF="usermanual_en.html#toc12.66">set/location <lat & long></A>
+<H2><A NAME="ss12.67">12.67</A> <A HREF="usermanual_en.html#toc12.67">set/location <lat & long></A>
</H2>
<P><CODE><B>set/location <lat & long></B> Set your latitude and longitude</CODE></P>
-<H2><A NAME="ss12.67">12.67</A> <A HREF="usermanual_en.html#toc12.67">set/logininfo</A>
+<H2><A NAME="ss12.68">12.68</A> <A HREF="usermanual_en.html#toc12.68">set/logininfo</A>
</H2>
<P><CODE><B>set/logininfo</B> Inform when a station logs in locally</CODE></P>
-<H2><A NAME="ss12.68">12.68</A> <A HREF="usermanual_en.html#toc12.68">set/name <your name></A>
+<H2><A NAME="ss12.69">12.69</A> <A HREF="usermanual_en.html#toc12.69">set/name <your name></A>
</H2>
<P><CODE><B>set/name <your name></B> Set your name</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.69">12.69</A> <A HREF="usermanual_en.html#toc12.69">set/page <lines per page></A>
+<H2><A NAME="ss12.70">12.70</A> <A HREF="usermanual_en.html#toc12.70">set/page <lines per page></A>
</H2>
<P><CODE><B>set/page <lines per page></B> Set the lines per page</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>The setting is stored in your user profile.</P>
-<H2><A NAME="ss12.70">12.70</A> <A HREF="usermanual_en.html#toc12.70">set/password</A>
+<H2><A NAME="ss12.71">12.71</A> <A HREF="usermanual_en.html#toc12.71">set/password</A>
</H2>
<P><CODE><B>set/password</B> Set your own password</CODE></P>
then ask you to type in your new password twice (to make sure you
get it right). You may or may not see the data echoed on the screen
as you type, depending on the type of telnet client you have.</P>
-<H2><A NAME="ss12.71">12.71</A> <A HREF="usermanual_en.html#toc12.71">set/prompt <string></A>
+<H2><A NAME="ss12.72">12.72</A> <A HREF="usermanual_en.html#toc12.72">set/prompt <string></A>
</H2>
<P><CODE><B>set/prompt <string></B> Set your prompt to <string></CODE></P>
-<H2><A NAME="ss12.72">12.72</A> <A HREF="usermanual_en.html#toc12.72">set/qra <locator></A>
+<H2><A NAME="ss12.73">12.73</A> <A HREF="usermanual_en.html#toc12.73">set/qra <locator></A>
</H2>
<P><CODE><B>set/qra <locator></B> Set your QRA Grid locator</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.73">12.73</A> <A HREF="usermanual_en.html#toc12.73">set/qth <your qth></A>
+<H2><A NAME="ss12.74">12.74</A> <A HREF="usermanual_en.html#toc12.74">set/qth <your qth></A>
</H2>
<P><CODE><B>set/qth <your qth></B> Set your QTH</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.74">12.74</A> <A HREF="usermanual_en.html#toc12.74">set/talk</A>
+<H2><A NAME="ss12.75">12.75</A> <A HREF="usermanual_en.html#toc12.75">set/talk</A>
</H2>
<P><CODE><B>set/talk</B> Allow TALK messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss12.75">12.75</A> <A HREF="usermanual_en.html#toc12.75">set/wcy</A>
+<H2><A NAME="ss12.76">12.76</A> <A HREF="usermanual_en.html#toc12.76">set/usstate</A>
+</H2>
+
+<P><CODE><B>set/usstate</B> Allow US State info on the end of DX announcements</CODE></P>
+
+
+<H2><A NAME="ss12.77">12.77</A> <A HREF="usermanual_en.html#toc12.77">set/wcy</A>
</H2>
<P><CODE><B>set/wcy</B> Allow WCY messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss12.76">12.76</A> <A HREF="usermanual_en.html#toc12.76">set/wwv</A>
+<H2><A NAME="ss12.78">12.78</A> <A HREF="usermanual_en.html#toc12.78">set/wwv</A>
</H2>
<P><CODE><B>set/wwv</B> Allow WWV messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss12.77">12.77</A> <A HREF="usermanual_en.html#toc12.77">set/wx</A>
+<H2><A NAME="ss12.79">12.79</A> <A HREF="usermanual_en.html#toc12.79">set/wx</A>
</H2>
<P><CODE><B>set/wx</B> Allow WX messages to come out on your terminal</CODE></P>
-<H2><A NAME="ss12.78">12.78</A> <A HREF="usermanual_en.html#toc12.78">show/configuration [<node>]</A>
+<H2><A NAME="ss12.80">12.80</A> <A HREF="usermanual_en.html#toc12.80">show/configuration [<node>]</A>
</H2>
<P><CODE><B>show/configuration [<node>]</B> Show all the nodes and users visible</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.79">12.79</A> <A HREF="usermanual_en.html#toc12.79">show/configuration/node</A>
+<H2><A NAME="ss12.81">12.81</A> <A HREF="usermanual_en.html#toc12.81">show/configuration/node</A>
</H2>
<P><CODE><B>show/configuration/node</B> Show all the nodes connected locally</CODE></P>
<P>Show all the nodes connected to this node.</P>
-<H2><A NAME="ss12.80">12.80</A> <A HREF="usermanual_en.html#toc12.80">show/date [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.82">12.82</A> <A HREF="usermanual_en.html#toc12.82">show/date [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/date [<prefix>|<callsign>]</B> Show the local time </CODE></P>
time and UTC as the computer has it right now. If you give some prefixes
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss12.81">12.81</A> <A HREF="usermanual_en.html#toc12.81">show/db0sdx <callsign></A>
+<H2><A NAME="ss12.83">12.83</A> <A HREF="usermanual_en.html#toc12.83">show/db0sdx <callsign></A>
</H2>
<P><CODE><B>show/db0sdx <callsign></B> Show QSL infomation from DB0SDX database</CODE></P>
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qslinfo.de.</P>
<P>See also SHOW/QRZ, SHOW/WM7D.</P>
-<H2><A NAME="ss12.82">12.82</A> <A HREF="usermanual_en.html#toc12.82">show/dx</A>
+<H2><A NAME="ss12.84">12.84</A> <A HREF="usermanual_en.html#toc12.84">show/dx</A>
</H2>
<P><CODE><B>show/dx</B> Interrogate the spot database</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.83">12.83</A> <A HREF="usermanual_en.html#toc12.83">show/dxcc <prefix></A>
+<H2><A NAME="ss12.85">12.85</A> <A HREF="usermanual_en.html#toc12.85">show/dxcc <prefix></A>
</H2>
<P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.84">12.84</A> <A HREF="usermanual_en.html#toc12.84">show/dxstats [days] [date]</A>
+<H2><A NAME="ss12.86">12.86</A> <A HREF="usermanual_en.html#toc12.86">show/dxstats [days] [date]</A>
</H2>
<P><CODE><B>show/dxstats [days] [date]</B> Show the DX Statistics</CODE></P>
<P>Show the total DX spots for the last <days> no of days (default is 31),
starting from a <date> (default: today).</P>
-<H2><A NAME="ss12.85">12.85</A> <A HREF="usermanual_en.html#toc12.85">show/files [<filearea> [<string>]]</A>
+<H2><A NAME="ss12.87">12.87</A> <A HREF="usermanual_en.html#toc12.87">show/files [<filearea> [<string>]]</A>
</H2>
<P><CODE><B>show/files [<filearea> [<string>]]</B> List the contents of a filearea</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>See also TYPE - to see the contents of a file.</P>
-<H2><A NAME="ss12.86">12.86</A> <A HREF="usermanual_en.html#toc12.86">show/filter</A>
+<H2><A NAME="ss12.88">12.88</A> <A HREF="usermanual_en.html#toc12.88">show/filter</A>
</H2>
<P><CODE><B>show/filter</B> Show the contents of all the filters you have set</CODE></P>
<P>Show the contents of all the filters that are set. This command displays
all the filters set - for all the various categories.</P>
-<H2><A NAME="ss12.87">12.87</A> <A HREF="usermanual_en.html#toc12.87">show/hfstats [days] [date]</A>
+<H2><A NAME="ss12.89">12.89</A> <A HREF="usermanual_en.html#toc12.89">show/hfstats [days] [date]</A>
</H2>
<P><CODE><B>show/hfstats [days] [date]</B> Show the HF DX Statistics </CODE></P>
<P>Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).</P>
-<H2><A NAME="ss12.88">12.88</A> <A HREF="usermanual_en.html#toc12.88">show/hftable [days] [date] [prefix ...]</A>
+<H2><A NAME="ss12.90">12.90</A> <A HREF="usermanual_en.html#toc12.90">show/hftable [days] [date] [prefix ...]</A>
</H2>
<P><CODE><B>show/hftable [days] [date] [prefix ...]</B> Show the HF DX Spotter Table</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.89">12.89</A> <A HREF="usermanual_en.html#toc12.89">show/moon [ndays] [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.91">12.91</A> <A HREF="usermanual_en.html#toc12.91">show/moon [ndays] [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/moon [ndays] [<prefix>|<callsign>]</B> Show Moon rise and set times</CODE></P>
<P>Upto 366 days can be checked both in the past and in the future.</P>
<P>Please note that the rise and set times are given as the UT times of rise and
set on the requested UT day.</P>
-<H2><A NAME="ss12.90">12.90</A> <A HREF="usermanual_en.html#toc12.90">show/muf <prefix> [<hours>][long]</A>
+<H2><A NAME="ss12.92">12.92</A> <A HREF="usermanual_en.html#toc12.92">show/muf <prefix> [<hours>][long]</A>
</H2>
<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show the likely propagation to a prefix</CODE></P>
<P>Gives you an estimate of the long path propagation characterics. It
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.</P>
-<H2><A NAME="ss12.91">12.91</A> <A HREF="usermanual_en.html#toc12.91">show/newconfiguration [<node>]</A>
+<H2><A NAME="ss12.93">12.93</A> <A HREF="usermanual_en.html#toc12.93">show/newconfiguration [<node>]</A>
</H2>
<P><CODE><B>show/newconfiguration [<node>]</B> Show all the nodes and users visible</CODE></P>
which may not take up quite as much space if you don't have any
loops.</P>
<P>BE WARNED: the list that is returned can be VERY long</P>
-<H2><A NAME="ss12.92">12.92</A> <A HREF="usermanual_en.html#toc12.92">show/newconfiguration/node</A>
+<H2><A NAME="ss12.94">12.94</A> <A HREF="usermanual_en.html#toc12.94">show/newconfiguration/node</A>
</H2>
<P><CODE><B>show/newconfiguration/node</B> Show all the nodes connected locally</CODE></P>
<P>Show all the nodes connected to this node in the new format.</P>
-<H2><A NAME="ss12.93">12.93</A> <A HREF="usermanual_en.html#toc12.93">show/prefix <callsign></A>
+<H2><A NAME="ss12.95">12.95</A> <A HREF="usermanual_en.html#toc12.95">show/prefix <callsign></A>
</H2>
<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database </CODE></P>
it is and then displays all the relevant prefixes for that country
together with the internal country no, the CQ and ITU regions. </P>
<P>See also SHOW/DXCC</P>
-<H2><A NAME="ss12.94">12.94</A> <A HREF="usermanual_en.html#toc12.94">show/qra <lat> <long></A>
+<H2><A NAME="ss12.96">12.96</A> <A HREF="usermanual_en.html#toc12.96">show/qra <lat> <long></A>
</H2>
<P><CODE><B>show/qra <lat> <long></B> Convert lat/long to a QRA Grid locator</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.95">12.95</A> <A HREF="usermanual_en.html#toc12.95">show/qra <locator> [<locator>]</A>
+<H2><A NAME="ss12.97">12.97</A> <A HREF="usermanual_en.html#toc12.97">show/qra <locator> [<locator>]</A>
</H2>
<P><CODE><B>show/qra <locator> [<locator>]</B> Show distance between QRA Grid locators</CODE></P>
-<H2><A NAME="ss12.96">12.96</A> <A HREF="usermanual_en.html#toc12.96">show/qrz <callsign></A>
+<H2><A NAME="ss12.98">12.98</A> <A HREF="usermanual_en.html#toc12.98">show/qrz <callsign></A>
</H2>
<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE></P>
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qrz.com </P>
<P>See also SHOW/WM7D for an alternative.</P>
-<H2><A NAME="ss12.97">12.97</A> <A HREF="usermanual_en.html#toc12.97">show/route <callsign> ...</A>
+<H2><A NAME="ss12.99">12.99</A> <A HREF="usermanual_en.html#toc12.99">show/route <callsign> ...</A>
</H2>
<P><CODE><B>show/route <callsign> ...</B> Show the route to the callsign</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.98">12.98</A> <A HREF="usermanual_en.html#toc12.98">show/satellite <name> [<hours> <interval>]</A>
+<H2><A NAME="ss12.100">12.100</A> <A HREF="usermanual_en.html#toc12.100">show/satellite <name> [<hours> <interval>]</A>
</H2>
<P><CODE><B>show/satellite <name> [<hours> <interval>]</B> Show tracking data</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.99">12.99</A> <A HREF="usermanual_en.html#toc12.99">show/station [<callsign> ..]</A>
+<H2><A NAME="ss12.101">12.101</A> <A HREF="usermanual_en.html#toc12.101">show/station [<callsign> ..]</A>
</H2>
<P><CODE><B>show/station [<callsign> ..]</B> Show information about a callsign</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>If no callsign is given then show the information for yourself.</P>
-<H2><A NAME="ss12.100">12.100</A> <A HREF="usermanual_en.html#toc12.100">show/sun [ndays] [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.102">12.102</A> <A HREF="usermanual_en.html#toc12.102">show/sun [ndays] [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/sun [ndays] [<prefix>|<callsign>]</B> Show sun rise and set times</CODE></P>
<P>Upto 366 days can be checked both in the past and in the future.</P>
<P>Please note that the rise and set times are given as the UT times of rise
and set on the requested UT day.</P>
-<H2><A NAME="ss12.101">12.101</A> <A HREF="usermanual_en.html#toc12.101">show/time [<prefix>|<callsign>]</A>
+<H2><A NAME="ss12.103">12.103</A> <A HREF="usermanual_en.html#toc12.103">show/time [<prefix>|<callsign>]</A>
</H2>
<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show the local time </CODE></P>
time and UTC as the computer has it right now. If you give some prefixes
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.</P>
-<H2><A NAME="ss12.102">12.102</A> <A HREF="usermanual_en.html#toc12.102">show/usdb [call ..]</A>
+<H2><A NAME="ss12.104">12.104</A> <A HREF="usermanual_en.html#toc12.104">show/usdb [call ..]</A>
</H2>
<P><CODE><B>show/usdb [call ..]</B> Show information held on the FCC Call database</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.103">12.103</A> <A HREF="usermanual_en.html#toc12.103">show/vhfstats [days] [date]</A>
+<H2><A NAME="ss12.105">12.105</A> <A HREF="usermanual_en.html#toc12.105">show/vhfstats [days] [date]</A>
</H2>
<P><CODE><B>show/vhfstats [days] [date]</B> Show the VHF DX Statistics</CODE></P>
<P>Show the VHF DX spots breakdown by band for the last
<days> no of days (default is 31), starting from a date (default: today).</P>
-<H2><A NAME="ss12.104">12.104</A> <A HREF="usermanual_en.html#toc12.104">show/vhftable [days] [date] [prefix ...]</A>
+<H2><A NAME="ss12.106">12.106</A> <A HREF="usermanual_en.html#toc12.106">show/vhftable [days] [date] [prefix ...]</A>
</H2>
<P><CODE><B>show/vhftable [days] [date] [prefix ...]</B> Show the VHF DX Spotter Table</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.105">12.105</A> <A HREF="usermanual_en.html#toc12.105">show/wcy</A>
+<H2><A NAME="ss12.107">12.107</A> <A HREF="usermanual_en.html#toc12.107">show/wcy</A>
</H2>
<P><CODE><B>show/wcy</B> Show last 10 WCY broadcasts</CODE></P>
-<H2><A NAME="ss12.106">12.106</A> <A HREF="usermanual_en.html#toc12.106">show/wcy <n></A>
+<H2><A NAME="ss12.108">12.108</A> <A HREF="usermanual_en.html#toc12.108">show/wcy <n></A>
</H2>
<P><CODE><B>show/wcy <n></B> Show last <n> WCY broadcasts</CODE></P>
<P>Display the most recent WCY information that has been received by the system</P>
-<H2><A NAME="ss12.107">12.107</A> <A HREF="usermanual_en.html#toc12.107">show/wm7d <callsign></A>
+<H2><A NAME="ss12.109">12.109</A> <A HREF="usermanual_en.html#toc12.109">show/wm7d <callsign></A>
</H2>
<P><CODE><B>show/wm7d <callsign></B> Show callbook details on a US callsigns</CODE></P>
and returns any information available for that US callsign. This service
is provided for users of this software by http://www.wm7d.net.</P>
<P>See also SHOW/QRZ. </P>
-<H2><A NAME="ss12.108">12.108</A> <A HREF="usermanual_en.html#toc12.108">show/wwv</A>
+<H2><A NAME="ss12.110">12.110</A> <A HREF="usermanual_en.html#toc12.110">show/wwv</A>
</H2>
<P><CODE><B>show/wwv</B> Show last 10 WWV broadcasts</CODE></P>
-<H2><A NAME="ss12.109">12.109</A> <A HREF="usermanual_en.html#toc12.109">show/wwv <n></A>
+<H2><A NAME="ss12.111">12.111</A> <A HREF="usermanual_en.html#toc12.111">show/wwv <n></A>
</H2>
<P><CODE><B>show/wwv <n></B> Show last <n> WWV broadcasts</CODE></P>
<P>Display the most recent WWV information that has been received by the system</P>
-<H2><A NAME="ss12.110">12.110</A> <A HREF="usermanual_en.html#toc12.110">sysop</A>
+<H2><A NAME="ss12.112">12.112</A> <A HREF="usermanual_en.html#toc12.112">sysop</A>
</H2>
<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE></P>
<P>They will all match. If there is no password you will still be offered
numbers but nothing will happen when you input a string. Any match is
case sensitive.</P>
-<H2><A NAME="ss12.111">12.111</A> <A HREF="usermanual_en.html#toc12.111">talk <call> > <node> [<text>]</A>
+<H2><A NAME="ss12.113">12.113</A> <A HREF="usermanual_en.html#toc12.113">talk <call> > <node> [<text>]</A>
</H2>
<P><CODE><B>talk <call> > <node> [<text>]</B> Send a text message to another station via a node</CODE></P>
</P>
<P>will send the hftable as you have it to all the people you are currently
talking to.</P>
-<H2><A NAME="ss12.112">12.112</A> <A HREF="usermanual_en.html#toc12.112">talk <call> [<text>]</A>
+<H2><A NAME="ss12.114">12.114</A> <A HREF="usermanual_en.html#toc12.114">talk <call> [<text>]</A>
</H2>
<P><CODE><B>talk <call> [<text>]</B> Send a text message to another station</CODE></P>
-<H2><A NAME="ss12.113">12.113</A> <A HREF="usermanual_en.html#toc12.113">type <filearea>/<name></A>
+<H2><A NAME="ss12.115">12.115</A> <A HREF="usermanual_en.html#toc12.115">type <filearea>/<name></A>
</H2>
<P><CODE><B>type <filearea>/<name></B> Look at the contents of a file in one of the fileareas</CODE></P>
</P>
<P>See also SHOW/FILES to see what fileareas are available and a
list of content.</P>
-<H2><A NAME="ss12.114">12.114</A> <A HREF="usermanual_en.html#toc12.114">unset/announce</A>
+<H2><A NAME="ss12.116">12.116</A> <A HREF="usermanual_en.html#toc12.116">unset/announce</A>
</H2>
<P><CODE><B>unset/announce</B> Stop announce messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.115">12.115</A> <A HREF="usermanual_en.html#toc12.115">unset/anntalk</A>
+<H2><A NAME="ss12.117">12.117</A> <A HREF="usermanual_en.html#toc12.117">unset/anntalk</A>
</H2>
<P><CODE><B>unset/anntalk</B> Stop talk like announce messages on your terminal</CODE></P>
</CODE></BLOCKQUOTE>
</P>
<P>allows you to see them again. This is the default.</P>
-<H2><A NAME="ss12.116">12.116</A> <A HREF="usermanual_en.html#toc12.116">unset/beep</A>
+<H2><A NAME="ss12.118">12.118</A> <A HREF="usermanual_en.html#toc12.118">unset/beep</A>
</H2>
<P><CODE><B>unset/beep</B> Stop beeps for DX and other messages on your terminal</CODE></P>
-<H2><A NAME="ss12.117">12.117</A> <A HREF="usermanual_en.html#toc12.117">unset/dx</A>
+<H2><A NAME="ss12.119">12.119</A> <A HREF="usermanual_en.html#toc12.119">unset/dx</A>
</H2>
<P><CODE><B>unset/dx</B> Stop DX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.118">12.118</A> <A HREF="usermanual_en.html#toc12.118">unset/dxgrid</A>
+<H2><A NAME="ss12.120">12.120</A> <A HREF="usermanual_en.html#toc12.120">unset/dxcq</A>
+</H2>
+
+<P><CODE><B>unset/dxcq</B> Stop CQ Zones on the end of DX announcements</CODE></P>
+
+<P>Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the
+time, the Spotted's CQ is on the LHS.</P>
+<P>Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss12.121">12.121</A> <A HREF="usermanual_en.html#toc12.121">unset/dxgrid</A>
</H2>
<P><CODE><B>unset/dxgrid</B> Stop QRA Grid Squares on the end of DX announcements</CODE></P>
of a DX announcement (there is just enough room). Some user programs
cannot cope with this. You can use this command to reset (or set)
this feature.</P>
-<H2><A NAME="ss12.119">12.119</A> <A HREF="usermanual_en.html#toc12.119">unset/dxstate</A>
+<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss12.122">12.122</A> <A HREF="usermanual_en.html#toc12.122">unset/dxitu</A>
</H2>
-<P><CODE><B>unset/dxstate</B> Stop US State info on the end of DX announcements</CODE></P>
+<P><CODE><B>unset/dxitu</B> Stop ITU Zones on the end of DX announcements</CODE></P>
-<P>If the spotter's or spotted's US State is known it is output on the
-end of a DX announcement (there is just enough room). </P>
-<P>A spotter's state will appear on the RHS of the time (like
-SET/DXGRID) and the spotted's State will appear on the LHS of the
-time field. Any information found will override any locator
-information from SET/DXGRID.</P>
-<P>Some user programs cannot cope with this. You can use this command
-to reset (or set) this feature.</P>
-<H2><A NAME="ss12.120">12.120</A> <A HREF="usermanual_en.html#toc12.120">unset/echo</A>
+<P>Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the
+time, the Spotted's ITU is on the LHS.</P>
+<P>Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss12.123">12.123</A> <A HREF="usermanual_en.html#toc12.123">unset/echo</A>
</H2>
<P><CODE><B>unset/echo</B> Stop the cluster echoing your input</CODE></P>
to change the setting appropriately. </P>
<P>The setting is stored in your user profile.</P>
<P>YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.</P>
-<H2><A NAME="ss12.121">12.121</A> <A HREF="usermanual_en.html#toc12.121">unset/email</A>
+<H2><A NAME="ss12.124">12.124</A> <A HREF="usermanual_en.html#toc12.124">unset/email</A>
</H2>
<P><CODE><B>unset/email</B> Stop personal msgs being forwarded by email</CODE></P>
</CODE></BLOCKQUOTE>
</P>
-<H2><A NAME="ss12.122">12.122</A> <A HREF="usermanual_en.html#toc12.122">unset/here</A>
+<H2><A NAME="ss12.125">12.125</A> <A HREF="usermanual_en.html#toc12.125">unset/here</A>
</H2>
<P><CODE><B>unset/here</B> Tell the system you are absent from your terminal</CODE></P>
-<H2><A NAME="ss12.123">12.123</A> <A HREF="usermanual_en.html#toc12.123">unset/logininfo</A>
+<H2><A NAME="ss12.126">12.126</A> <A HREF="usermanual_en.html#toc12.126">unset/logininfo</A>
</H2>
<P><CODE><B>unset/logininfo</B> Inform when a station logs out locally</CODE></P>
-<H2><A NAME="ss12.124">12.124</A> <A HREF="usermanual_en.html#toc12.124">unset/privilege</A>
+<H2><A NAME="ss12.127">12.127</A> <A HREF="usermanual_en.html#toc12.127">unset/privilege</A>
</H2>
<P><CODE><B>unset/privilege</B> Remove any privilege for this session</CODE></P>
use. If you want to get your normal privilege back you will need to
either logout and login again (if you are on a console) or use the
SYSOP command.</P>
-<H2><A NAME="ss12.125">12.125</A> <A HREF="usermanual_en.html#toc12.125">unset/prompt</A>
+<H2><A NAME="ss12.128">12.128</A> <A HREF="usermanual_en.html#toc12.128">unset/prompt</A>
</H2>
<P><CODE><B>unset/prompt</B> Set your prompt back to default</CODE></P>
</P>
<P>UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back to
normal.</P>
-<H2><A NAME="ss12.126">12.126</A> <A HREF="usermanual_en.html#toc12.126">unset/talk</A>
+<H2><A NAME="ss12.129">12.129</A> <A HREF="usermanual_en.html#toc12.129">unset/talk</A>
</H2>
<P><CODE><B>unset/talk</B> Stop TALK messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.127">12.127</A> <A HREF="usermanual_en.html#toc12.127">unset/wcy</A>
+<H2><A NAME="ss12.130">12.130</A> <A HREF="usermanual_en.html#toc12.130">unset/usstate</A>
+</H2>
+
+<P><CODE><B>unset/usstate</B> Stop US State info on the end of DX announcements</CODE></P>
+
+<P>If the spotter's or spotted's US State is known it is output on the
+end of a DX announcement (there is just enough room). </P>
+<P>A spotter's state will appear on the RHS of the time (like
+SET/DXGRID) and the spotted's State will appear on the LHS of the
+time field. Any information found will override any locator
+information from SET/DXGRID.</P>
+<P>Some user programs cannot cope with this. You can use this command
+to reset (or set) this feature.</P>
+<P>Conflicts with: SET/DXCQ, SET/DXITU</P>
+<P>Do a STAT/USER to see which flags you have set if you are confused. </P>
+<H2><A NAME="ss12.131">12.131</A> <A HREF="usermanual_en.html#toc12.131">unset/wcy</A>
</H2>
<P><CODE><B>unset/wcy</B> Stop WCY messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.128">12.128</A> <A HREF="usermanual_en.html#toc12.128">unset/wwv</A>
+<H2><A NAME="ss12.132">12.132</A> <A HREF="usermanual_en.html#toc12.132">unset/wwv</A>
</H2>
<P><CODE><B>unset/wwv</B> Stop WWV messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.129">12.129</A> <A HREF="usermanual_en.html#toc12.129">unset/wx</A>
+<H2><A NAME="ss12.133">12.133</A> <A HREF="usermanual_en.html#toc12.133">unset/wx</A>
</H2>
<P><CODE><B>unset/wx</B> Stop WX messages coming out on your terminal</CODE></P>
-<H2><A NAME="ss12.130">12.130</A> <A HREF="usermanual_en.html#toc12.130">who</A>
+<H2><A NAME="ss12.134">12.134</A> <A HREF="usermanual_en.html#toc12.134">who</A>
</H2>
<P><CODE><B>who</B> Show who is physically connected</CODE></P>
<P>This is a quick listing that shows which callsigns are connected and
what sort of connection they have</P>
-<H2><A NAME="ss12.131">12.131</A> <A HREF="usermanual_en.html#toc12.131">wx <text></A>
+<H2><A NAME="ss12.135">12.135</A> <A HREF="usermanual_en.html#toc12.135">wx <text></A>
</H2>
<P><CODE><B>wx <text></B> Send a weather message to local users</CODE></P>
-<H2><A NAME="ss12.132">12.132</A> <A HREF="usermanual_en.html#toc12.132">wx full <text></A>
+<H2><A NAME="ss12.136">12.136</A> <A HREF="usermanual_en.html#toc12.136">wx full <text></A>
</H2>
<P><CODE><B>wx full <text></B> Send a weather message to all cluster users</CODE></P>
<LI><A NAME="toc12.56">12.56</A> <A HREF="usermanual_en-12.html#ss12.56">set/anntalk</A>
<LI><A NAME="toc12.57">12.57</A> <A HREF="usermanual_en-12.html#ss12.57">set/beep</A>
<LI><A NAME="toc12.58">12.58</A> <A HREF="usermanual_en-12.html#ss12.58">set/dx</A>
-<LI><A NAME="toc12.59">12.59</A> <A HREF="usermanual_en-12.html#ss12.59">set/dxgrid</A>
-<LI><A NAME="toc12.60">12.60</A> <A HREF="usermanual_en-12.html#ss12.60">set/dxstate</A>
-<LI><A NAME="toc12.61">12.61</A> <A HREF="usermanual_en-12.html#ss12.61">set/echo</A>
-<LI><A NAME="toc12.62">12.62</A> <A HREF="usermanual_en-12.html#ss12.62">set/email <email> ...</A>
-<LI><A NAME="toc12.63">12.63</A> <A HREF="usermanual_en-12.html#ss12.63">set/here</A>
-<LI><A NAME="toc12.64">12.64</A> <A HREF="usermanual_en-12.html#ss12.64">set/homenode <node> </A>
-<LI><A NAME="toc12.65">12.65</A> <A HREF="usermanual_en-12.html#ss12.65">set/language <lang></A>
-<LI><A NAME="toc12.66">12.66</A> <A HREF="usermanual_en-12.html#ss12.66">set/location <lat & long></A>
-<LI><A NAME="toc12.67">12.67</A> <A HREF="usermanual_en-12.html#ss12.67">set/logininfo</A>
-<LI><A NAME="toc12.68">12.68</A> <A HREF="usermanual_en-12.html#ss12.68">set/name <your name></A>
-<LI><A NAME="toc12.69">12.69</A> <A HREF="usermanual_en-12.html#ss12.69">set/page <lines per page></A>
-<LI><A NAME="toc12.70">12.70</A> <A HREF="usermanual_en-12.html#ss12.70">set/password</A>
-<LI><A NAME="toc12.71">12.71</A> <A HREF="usermanual_en-12.html#ss12.71">set/prompt <string></A>
-<LI><A NAME="toc12.72">12.72</A> <A HREF="usermanual_en-12.html#ss12.72">set/qra <locator></A>
-<LI><A NAME="toc12.73">12.73</A> <A HREF="usermanual_en-12.html#ss12.73">set/qth <your qth></A>
-<LI><A NAME="toc12.74">12.74</A> <A HREF="usermanual_en-12.html#ss12.74">set/talk</A>
-<LI><A NAME="toc12.75">12.75</A> <A HREF="usermanual_en-12.html#ss12.75">set/wcy</A>
-<LI><A NAME="toc12.76">12.76</A> <A HREF="usermanual_en-12.html#ss12.76">set/wwv</A>
-<LI><A NAME="toc12.77">12.77</A> <A HREF="usermanual_en-12.html#ss12.77">set/wx</A>
-<LI><A NAME="toc12.78">12.78</A> <A HREF="usermanual_en-12.html#ss12.78">show/configuration [<node>]</A>
-<LI><A NAME="toc12.79">12.79</A> <A HREF="usermanual_en-12.html#ss12.79">show/configuration/node</A>
-<LI><A NAME="toc12.80">12.80</A> <A HREF="usermanual_en-12.html#ss12.80">show/date [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.81">12.81</A> <A HREF="usermanual_en-12.html#ss12.81">show/db0sdx <callsign></A>
-<LI><A NAME="toc12.82">12.82</A> <A HREF="usermanual_en-12.html#ss12.82">show/dx</A>
-<LI><A NAME="toc12.83">12.83</A> <A HREF="usermanual_en-12.html#ss12.83">show/dxcc <prefix></A>
-<LI><A NAME="toc12.84">12.84</A> <A HREF="usermanual_en-12.html#ss12.84">show/dxstats [days] [date]</A>
-<LI><A NAME="toc12.85">12.85</A> <A HREF="usermanual_en-12.html#ss12.85">show/files [<filearea> [<string>]]</A>
-<LI><A NAME="toc12.86">12.86</A> <A HREF="usermanual_en-12.html#ss12.86">show/filter</A>
-<LI><A NAME="toc12.87">12.87</A> <A HREF="usermanual_en-12.html#ss12.87">show/hfstats [days] [date]</A>
-<LI><A NAME="toc12.88">12.88</A> <A HREF="usermanual_en-12.html#ss12.88">show/hftable [days] [date] [prefix ...]</A>
-<LI><A NAME="toc12.89">12.89</A> <A HREF="usermanual_en-12.html#ss12.89">show/moon [ndays] [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.90">12.90</A> <A HREF="usermanual_en-12.html#ss12.90">show/muf <prefix> [<hours>][long]</A>
-<LI><A NAME="toc12.91">12.91</A> <A HREF="usermanual_en-12.html#ss12.91">show/newconfiguration [<node>]</A>
-<LI><A NAME="toc12.92">12.92</A> <A HREF="usermanual_en-12.html#ss12.92">show/newconfiguration/node</A>
-<LI><A NAME="toc12.93">12.93</A> <A HREF="usermanual_en-12.html#ss12.93">show/prefix <callsign></A>
-<LI><A NAME="toc12.94">12.94</A> <A HREF="usermanual_en-12.html#ss12.94">show/qra <lat> <long></A>
-<LI><A NAME="toc12.95">12.95</A> <A HREF="usermanual_en-12.html#ss12.95">show/qra <locator> [<locator>]</A>
-<LI><A NAME="toc12.96">12.96</A> <A HREF="usermanual_en-12.html#ss12.96">show/qrz <callsign></A>
-<LI><A NAME="toc12.97">12.97</A> <A HREF="usermanual_en-12.html#ss12.97">show/route <callsign> ...</A>
-<LI><A NAME="toc12.98">12.98</A> <A HREF="usermanual_en-12.html#ss12.98">show/satellite <name> [<hours> <interval>]</A>
-<LI><A NAME="toc12.99">12.99</A> <A HREF="usermanual_en-12.html#ss12.99">show/station [<callsign> ..]</A>
-<LI><A NAME="toc12.100">12.100</A> <A HREF="usermanual_en-12.html#ss12.100">show/sun [ndays] [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.101">12.101</A> <A HREF="usermanual_en-12.html#ss12.101">show/time [<prefix>|<callsign>]</A>
-<LI><A NAME="toc12.102">12.102</A> <A HREF="usermanual_en-12.html#ss12.102">show/usdb [call ..]</A>
-<LI><A NAME="toc12.103">12.103</A> <A HREF="usermanual_en-12.html#ss12.103">show/vhfstats [days] [date]</A>
-<LI><A NAME="toc12.104">12.104</A> <A HREF="usermanual_en-12.html#ss12.104">show/vhftable [days] [date] [prefix ...]</A>
-<LI><A NAME="toc12.105">12.105</A> <A HREF="usermanual_en-12.html#ss12.105">show/wcy</A>
-<LI><A NAME="toc12.106">12.106</A> <A HREF="usermanual_en-12.html#ss12.106">show/wcy <n></A>
-<LI><A NAME="toc12.107">12.107</A> <A HREF="usermanual_en-12.html#ss12.107">show/wm7d <callsign></A>
-<LI><A NAME="toc12.108">12.108</A> <A HREF="usermanual_en-12.html#ss12.108">show/wwv</A>
-<LI><A NAME="toc12.109">12.109</A> <A HREF="usermanual_en-12.html#ss12.109">show/wwv <n></A>
-<LI><A NAME="toc12.110">12.110</A> <A HREF="usermanual_en-12.html#ss12.110">sysop</A>
-<LI><A NAME="toc12.111">12.111</A> <A HREF="usermanual_en-12.html#ss12.111">talk <call> > <node> [<text>]</A>
-<LI><A NAME="toc12.112">12.112</A> <A HREF="usermanual_en-12.html#ss12.112">talk <call> [<text>]</A>
-<LI><A NAME="toc12.113">12.113</A> <A HREF="usermanual_en-12.html#ss12.113">type <filearea>/<name></A>
-<LI><A NAME="toc12.114">12.114</A> <A HREF="usermanual_en-12.html#ss12.114">unset/announce</A>
-<LI><A NAME="toc12.115">12.115</A> <A HREF="usermanual_en-12.html#ss12.115">unset/anntalk</A>
-<LI><A NAME="toc12.116">12.116</A> <A HREF="usermanual_en-12.html#ss12.116">unset/beep</A>
-<LI><A NAME="toc12.117">12.117</A> <A HREF="usermanual_en-12.html#ss12.117">unset/dx</A>
-<LI><A NAME="toc12.118">12.118</A> <A HREF="usermanual_en-12.html#ss12.118">unset/dxgrid</A>
-<LI><A NAME="toc12.119">12.119</A> <A HREF="usermanual_en-12.html#ss12.119">unset/dxstate</A>
-<LI><A NAME="toc12.120">12.120</A> <A HREF="usermanual_en-12.html#ss12.120">unset/echo</A>
-<LI><A NAME="toc12.121">12.121</A> <A HREF="usermanual_en-12.html#ss12.121">unset/email</A>
-<LI><A NAME="toc12.122">12.122</A> <A HREF="usermanual_en-12.html#ss12.122">unset/here</A>
-<LI><A NAME="toc12.123">12.123</A> <A HREF="usermanual_en-12.html#ss12.123">unset/logininfo</A>
-<LI><A NAME="toc12.124">12.124</A> <A HREF="usermanual_en-12.html#ss12.124">unset/privilege</A>
-<LI><A NAME="toc12.125">12.125</A> <A HREF="usermanual_en-12.html#ss12.125">unset/prompt</A>
-<LI><A NAME="toc12.126">12.126</A> <A HREF="usermanual_en-12.html#ss12.126">unset/talk</A>
-<LI><A NAME="toc12.127">12.127</A> <A HREF="usermanual_en-12.html#ss12.127">unset/wcy</A>
-<LI><A NAME="toc12.128">12.128</A> <A HREF="usermanual_en-12.html#ss12.128">unset/wwv</A>
-<LI><A NAME="toc12.129">12.129</A> <A HREF="usermanual_en-12.html#ss12.129">unset/wx</A>
-<LI><A NAME="toc12.130">12.130</A> <A HREF="usermanual_en-12.html#ss12.130">who</A>
-<LI><A NAME="toc12.131">12.131</A> <A HREF="usermanual_en-12.html#ss12.131">wx <text></A>
-<LI><A NAME="toc12.132">12.132</A> <A HREF="usermanual_en-12.html#ss12.132">wx full <text></A>
+<LI><A NAME="toc12.59">12.59</A> <A HREF="usermanual_en-12.html#ss12.59">set/dxcq</A>
+<LI><A NAME="toc12.60">12.60</A> <A HREF="usermanual_en-12.html#ss12.60">set/dxgrid</A>
+<LI><A NAME="toc12.61">12.61</A> <A HREF="usermanual_en-12.html#ss12.61">set/dxitu</A>
+<LI><A NAME="toc12.62">12.62</A> <A HREF="usermanual_en-12.html#ss12.62">set/echo</A>
+<LI><A NAME="toc12.63">12.63</A> <A HREF="usermanual_en-12.html#ss12.63">set/email <email> ...</A>
+<LI><A NAME="toc12.64">12.64</A> <A HREF="usermanual_en-12.html#ss12.64">set/here</A>
+<LI><A NAME="toc12.65">12.65</A> <A HREF="usermanual_en-12.html#ss12.65">set/homenode <node> </A>
+<LI><A NAME="toc12.66">12.66</A> <A HREF="usermanual_en-12.html#ss12.66">set/language <lang></A>
+<LI><A NAME="toc12.67">12.67</A> <A HREF="usermanual_en-12.html#ss12.67">set/location <lat & long></A>
+<LI><A NAME="toc12.68">12.68</A> <A HREF="usermanual_en-12.html#ss12.68">set/logininfo</A>
+<LI><A NAME="toc12.69">12.69</A> <A HREF="usermanual_en-12.html#ss12.69">set/name <your name></A>
+<LI><A NAME="toc12.70">12.70</A> <A HREF="usermanual_en-12.html#ss12.70">set/page <lines per page></A>
+<LI><A NAME="toc12.71">12.71</A> <A HREF="usermanual_en-12.html#ss12.71">set/password</A>
+<LI><A NAME="toc12.72">12.72</A> <A HREF="usermanual_en-12.html#ss12.72">set/prompt <string></A>
+<LI><A NAME="toc12.73">12.73</A> <A HREF="usermanual_en-12.html#ss12.73">set/qra <locator></A>
+<LI><A NAME="toc12.74">12.74</A> <A HREF="usermanual_en-12.html#ss12.74">set/qth <your qth></A>
+<LI><A NAME="toc12.75">12.75</A> <A HREF="usermanual_en-12.html#ss12.75">set/talk</A>
+<LI><A NAME="toc12.76">12.76</A> <A HREF="usermanual_en-12.html#ss12.76">set/usstate</A>
+<LI><A NAME="toc12.77">12.77</A> <A HREF="usermanual_en-12.html#ss12.77">set/wcy</A>
+<LI><A NAME="toc12.78">12.78</A> <A HREF="usermanual_en-12.html#ss12.78">set/wwv</A>
+<LI><A NAME="toc12.79">12.79</A> <A HREF="usermanual_en-12.html#ss12.79">set/wx</A>
+<LI><A NAME="toc12.80">12.80</A> <A HREF="usermanual_en-12.html#ss12.80">show/configuration [<node>]</A>
+<LI><A NAME="toc12.81">12.81</A> <A HREF="usermanual_en-12.html#ss12.81">show/configuration/node</A>
+<LI><A NAME="toc12.82">12.82</A> <A HREF="usermanual_en-12.html#ss12.82">show/date [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.83">12.83</A> <A HREF="usermanual_en-12.html#ss12.83">show/db0sdx <callsign></A>
+<LI><A NAME="toc12.84">12.84</A> <A HREF="usermanual_en-12.html#ss12.84">show/dx</A>
+<LI><A NAME="toc12.85">12.85</A> <A HREF="usermanual_en-12.html#ss12.85">show/dxcc <prefix></A>
+<LI><A NAME="toc12.86">12.86</A> <A HREF="usermanual_en-12.html#ss12.86">show/dxstats [days] [date]</A>
+<LI><A NAME="toc12.87">12.87</A> <A HREF="usermanual_en-12.html#ss12.87">show/files [<filearea> [<string>]]</A>
+<LI><A NAME="toc12.88">12.88</A> <A HREF="usermanual_en-12.html#ss12.88">show/filter</A>
+<LI><A NAME="toc12.89">12.89</A> <A HREF="usermanual_en-12.html#ss12.89">show/hfstats [days] [date]</A>
+<LI><A NAME="toc12.90">12.90</A> <A HREF="usermanual_en-12.html#ss12.90">show/hftable [days] [date] [prefix ...]</A>
+<LI><A NAME="toc12.91">12.91</A> <A HREF="usermanual_en-12.html#ss12.91">show/moon [ndays] [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.92">12.92</A> <A HREF="usermanual_en-12.html#ss12.92">show/muf <prefix> [<hours>][long]</A>
+<LI><A NAME="toc12.93">12.93</A> <A HREF="usermanual_en-12.html#ss12.93">show/newconfiguration [<node>]</A>
+<LI><A NAME="toc12.94">12.94</A> <A HREF="usermanual_en-12.html#ss12.94">show/newconfiguration/node</A>
+<LI><A NAME="toc12.95">12.95</A> <A HREF="usermanual_en-12.html#ss12.95">show/prefix <callsign></A>
+<LI><A NAME="toc12.96">12.96</A> <A HREF="usermanual_en-12.html#ss12.96">show/qra <lat> <long></A>
+<LI><A NAME="toc12.97">12.97</A> <A HREF="usermanual_en-12.html#ss12.97">show/qra <locator> [<locator>]</A>
+<LI><A NAME="toc12.98">12.98</A> <A HREF="usermanual_en-12.html#ss12.98">show/qrz <callsign></A>
+<LI><A NAME="toc12.99">12.99</A> <A HREF="usermanual_en-12.html#ss12.99">show/route <callsign> ...</A>
+<LI><A NAME="toc12.100">12.100</A> <A HREF="usermanual_en-12.html#ss12.100">show/satellite <name> [<hours> <interval>]</A>
+<LI><A NAME="toc12.101">12.101</A> <A HREF="usermanual_en-12.html#ss12.101">show/station [<callsign> ..]</A>
+<LI><A NAME="toc12.102">12.102</A> <A HREF="usermanual_en-12.html#ss12.102">show/sun [ndays] [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.103">12.103</A> <A HREF="usermanual_en-12.html#ss12.103">show/time [<prefix>|<callsign>]</A>
+<LI><A NAME="toc12.104">12.104</A> <A HREF="usermanual_en-12.html#ss12.104">show/usdb [call ..]</A>
+<LI><A NAME="toc12.105">12.105</A> <A HREF="usermanual_en-12.html#ss12.105">show/vhfstats [days] [date]</A>
+<LI><A NAME="toc12.106">12.106</A> <A HREF="usermanual_en-12.html#ss12.106">show/vhftable [days] [date] [prefix ...]</A>
+<LI><A NAME="toc12.107">12.107</A> <A HREF="usermanual_en-12.html#ss12.107">show/wcy</A>
+<LI><A NAME="toc12.108">12.108</A> <A HREF="usermanual_en-12.html#ss12.108">show/wcy <n></A>
+<LI><A NAME="toc12.109">12.109</A> <A HREF="usermanual_en-12.html#ss12.109">show/wm7d <callsign></A>
+<LI><A NAME="toc12.110">12.110</A> <A HREF="usermanual_en-12.html#ss12.110">show/wwv</A>
+<LI><A NAME="toc12.111">12.111</A> <A HREF="usermanual_en-12.html#ss12.111">show/wwv <n></A>
+<LI><A NAME="toc12.112">12.112</A> <A HREF="usermanual_en-12.html#ss12.112">sysop</A>
+<LI><A NAME="toc12.113">12.113</A> <A HREF="usermanual_en-12.html#ss12.113">talk <call> > <node> [<text>]</A>
+<LI><A NAME="toc12.114">12.114</A> <A HREF="usermanual_en-12.html#ss12.114">talk <call> [<text>]</A>
+<LI><A NAME="toc12.115">12.115</A> <A HREF="usermanual_en-12.html#ss12.115">type <filearea>/<name></A>
+<LI><A NAME="toc12.116">12.116</A> <A HREF="usermanual_en-12.html#ss12.116">unset/announce</A>
+<LI><A NAME="toc12.117">12.117</A> <A HREF="usermanual_en-12.html#ss12.117">unset/anntalk</A>
+<LI><A NAME="toc12.118">12.118</A> <A HREF="usermanual_en-12.html#ss12.118">unset/beep</A>
+<LI><A NAME="toc12.119">12.119</A> <A HREF="usermanual_en-12.html#ss12.119">unset/dx</A>
+<LI><A NAME="toc12.120">12.120</A> <A HREF="usermanual_en-12.html#ss12.120">unset/dxcq</A>
+<LI><A NAME="toc12.121">12.121</A> <A HREF="usermanual_en-12.html#ss12.121">unset/dxgrid</A>
+<LI><A NAME="toc12.122">12.122</A> <A HREF="usermanual_en-12.html#ss12.122">unset/dxitu</A>
+<LI><A NAME="toc12.123">12.123</A> <A HREF="usermanual_en-12.html#ss12.123">unset/echo</A>
+<LI><A NAME="toc12.124">12.124</A> <A HREF="usermanual_en-12.html#ss12.124">unset/email</A>
+<LI><A NAME="toc12.125">12.125</A> <A HREF="usermanual_en-12.html#ss12.125">unset/here</A>
+<LI><A NAME="toc12.126">12.126</A> <A HREF="usermanual_en-12.html#ss12.126">unset/logininfo</A>
+<LI><A NAME="toc12.127">12.127</A> <A HREF="usermanual_en-12.html#ss12.127">unset/privilege</A>
+<LI><A NAME="toc12.128">12.128</A> <A HREF="usermanual_en-12.html#ss12.128">unset/prompt</A>
+<LI><A NAME="toc12.129">12.129</A> <A HREF="usermanual_en-12.html#ss12.129">unset/talk</A>
+<LI><A NAME="toc12.130">12.130</A> <A HREF="usermanual_en-12.html#ss12.130">unset/usstate</A>
+<LI><A NAME="toc12.131">12.131</A> <A HREF="usermanual_en-12.html#ss12.131">unset/wcy</A>
+<LI><A NAME="toc12.132">12.132</A> <A HREF="usermanual_en-12.html#ss12.132">unset/wwv</A>
+<LI><A NAME="toc12.133">12.133</A> <A HREF="usermanual_en-12.html#ss12.133">unset/wx</A>
+<LI><A NAME="toc12.134">12.134</A> <A HREF="usermanual_en-12.html#ss12.134">who</A>
+<LI><A NAME="toc12.135">12.135</A> <A HREF="usermanual_en-12.html#ss12.135">wx <text></A>
+<LI><A NAME="toc12.136">12.136</A> <A HREF="usermanual_en-12.html#ss12.136">wx full <text></A>
</UL>
<HR>
<A HREF="usermanual_en-1.html">Next</A>
<bf>set/dx</bf> Allow DX messages to come out on your terminal
</tt>
+<P>
+<sect1>set/dxcq (0)
+
+<P>
+<tt>
+<bf>set/dxcq</bf> Show CQ Zones on the end of DX announcements
+</tt>
+
<P>
<sect1>set/dxgrid (0)
</tt>
<P>
-<sect1>set/dxnet <call> [<call>..] (5)
+<sect1>set/dxitu (0)
<P>
<tt>
-<bf>set/dxnet <call> [<call>..]</bf> Make the callsign an DXNet node
+<bf>set/dxitu</bf> Show ITU Zones on the end of DX announcements
</tt>
<P>
-<sect1>set/dxstate (0)
+<sect1>set/dxnet <call> [<call>..] (5)
<P>
<tt>
-<bf>set/dxstate</bf> Allow US State info on the end of DX announcements
+<bf>set/dxnet <call> [<call>..]</bf> Make the callsign an DXNet node
</tt>
<P>
<bf>set/talk</bf> Allow TALK messages to come out on your terminal
</tt>
+<P>
+<sect1>set/usstate (0)
+
+<P>
+<tt>
+<bf>set/usstate</bf> Allow US State info on the end of DX announcements
+</tt>
+
<P>
<sect1>set/wcy (0)
</tt>
<P>
+<sect1>unset/dxcq (0)
+
+<P>
+<tt>
+<bf>unset/dxcq</bf> Stop CQ Zones on the end of DX announcements
+</tt>
+
+<P>
+Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the
+time, the Spotted's CQ is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.
<sect1>unset/dxgrid (0)
<P>
of a DX announcement (there is just enough room). Some user programs
cannot cope with this. You can use this command to reset (or set)
this feature.
-<sect1>unset/dxstate (0)
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
+<sect1>unset/dxitu (0)
<P>
<tt>
-<bf>unset/dxstate</bf> Stop US State info on the end of DX announcements
+<bf>unset/dxitu</bf> Stop ITU Zones on the end of DX announcements
</tt>
<P>
-If the spotter's or spotted's US State is known it is output on the
-end of a DX announcement (there is just enough room).
+Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the
+time, the Spotted's ITU is on the LHS.
-A spotter's state will appear on the RHS of the time (like
-SET/DXGRID) and the spotted's State will appear on the LHS of the
-time field. Any information found will override any locator
-information from SET/DXGRID.
+Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE
-Some user programs cannot cope with this. You can use this command
-to reset (or set) this feature.
+Do a STAT/USER to see which flags you have set if you are confused.
<sect1>unset/echo (0)
<P>
</tt>
<P>
+<sect1>unset/usstate (0)
+
+<P>
+<tt>
+<bf>unset/usstate</bf> Stop US State info on the end of DX announcements
+</tt>
+
+<P>
+If the spotter's or spotted's US State is known it is output on the
+end of a DX announcement (there is just enough room).
+
+A spotter's state will appear on the RHS of the time (like
+SET/DXGRID) and the spotted's State will appear on the LHS of the
+time field. Any information found will override any locator
+information from SET/DXGRID.
+
+Some user programs cannot cope with this. You can use this command
+to reset (or set) this feature.
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
<sect1>unset/wcy (0)
<P>
<bf>set/dx</bf> Allow DX messages to come out on your terminal
</tt>
+<P>
+<sect1>set/dxcq
+
+<P>
+<tt>
+<bf>set/dxcq</bf> Show CQ Zones on the end of DX announcements
+</tt>
+
<P>
<sect1>set/dxgrid
</tt>
<P>
-<sect1>set/dxstate
+<sect1>set/dxitu
<P>
<tt>
-<bf>set/dxstate</bf> Allow US State info on the end of DX announcements
+<bf>set/dxitu</bf> Show ITU Zones on the end of DX announcements
</tt>
<P>
<bf>set/talk</bf> Allow TALK messages to come out on your terminal
</tt>
+<P>
+<sect1>set/usstate
+
+<P>
+<tt>
+<bf>set/usstate</bf> Allow US State info on the end of DX announcements
+</tt>
+
<P>
<sect1>set/wcy
</tt>
<P>
+<sect1>unset/dxcq
+
+<P>
+<tt>
+<bf>unset/dxcq</bf> Stop CQ Zones on the end of DX announcements
+</tt>
+
+<P>
+Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the
+time, the Spotted's CQ is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.
<sect1>unset/dxgrid
<P>
of a DX announcement (there is just enough room). Some user programs
cannot cope with this. You can use this command to reset (or set)
this feature.
-<sect1>unset/dxstate
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
+<sect1>unset/dxitu
<P>
<tt>
-<bf>unset/dxstate</bf> Stop US State info on the end of DX announcements
+<bf>unset/dxitu</bf> Stop ITU Zones on the end of DX announcements
</tt>
<P>
-If the spotter's or spotted's US State is known it is output on the
-end of a DX announcement (there is just enough room).
+Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the
+time, the Spotted's ITU is on the LHS.
-A spotter's state will appear on the RHS of the time (like
-SET/DXGRID) and the spotted's State will appear on the LHS of the
-time field. Any information found will override any locator
-information from SET/DXGRID.
+Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE
-Some user programs cannot cope with this. You can use this command
-to reset (or set) this feature.
+Do a STAT/USER to see which flags you have set if you are confused.
<sect1>unset/echo
<P>
</tt>
<P>
+<sect1>unset/usstate
+
+<P>
+<tt>
+<bf>unset/usstate</bf> Stop US State info on the end of DX announcements
+</tt>
+
+<P>
+If the spotter's or spotted's US State is known it is output on the
+end of a DX announcement (there is just enough room).
+
+A spotter's state will appear on the RHS of the time (like
+SET/DXGRID) and the spotted's State will appear on the LHS of the
+time field. Any information found will override any locator
+information from SET/DXGRID.
+
+Some user programs cannot cope with this. You can use this command
+to reset (or set) this feature.
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
<sect1>unset/wcy
<P>
11.100 set/beep (0)
11.101 set/clx <call> [<call>..] (5)
11.102 set/dx (0)
- 11.103 set/dxgrid (0)
- 11.104 set/dxnet <call> [<call>..] (5)
- 11.105 set/dxstate (0)
- 11.106 set/echo (0)
- 11.107 set/email <email> ... (0)
- 11.108 set/here (0)
- 11.109 set/homenode <node> (0)
- 11.110 set/hops <call> ann|spots|route|wwv|wcy <n> (8)
- 11.111 set/language <lang> (0)
- 11.112 set/location <lat & long> (0)
- 11.113 set/logininfo (0)
- 11.114 set/name <your name> (0)
- 11.115 set/node <call> [<call>..] (5)
- 11.116 set/obscount <count> <call> (8)
- 11.117 set/page <lines per page> (0)
- 11.118 set/password (0)
- 11.119 set/prompt <string> (0)
- 11.120 set/qra <locator> (0)
- 11.121 set/qth <your qth> (0)
- 11.122 set/spider <call> [<call>..] (5)
- 11.123 set/talk (0)
- 11.124 set/wcy (0)
- 11.125 set/wwv (0)
- 11.126 set/wx (0)
- 11.127 show/baddx (1)
- 11.128 show/badnode (1)
- 11.129 show/badspotter (1)
- 11.130 show/badword (1)
- 11.131 show/configuration [<node>] (0)
- 11.132 show/configuration/node (0)
- 11.133 show/connect (1)
- 11.134 show/date [<prefix>|<callsign>] (0)
- 11.135 show/db0sdx <callsign> (0)
- 11.136 show/dx (0)
- 11.137 show/dxcc <prefix> (0)
- 11.138 show/dxstats [days] [date] (0)
- 11.139 show/files [<filearea> [<string>]] (0)
- 11.140 show/filter (0)
- 11.141 show/hfstats [days] [date] (0)
- 11.142 show/hftable [days] [date] [prefix ...] (0)
- 11.143 show/hops <call> [ann|spots|route|wcy|wwv] (8)
- 11.144 show/isolate (1)
- 11.145 show/log [<callsign>] (8)
- 11.146 show/moon [ndays] [<prefix>|<callsign>] (0)
- 11.147 show/muf <prefix> [<hours>][long] (0)
- 11.148 show/newconfiguration [<node>] (0)
- 11.149 show/newconfiguration/node (0)
- 11.150 show/node [<callsign> ...] (1)
- 11.151 show/prefix <callsign> (0)
- 11.152 show/program (5)
- 11.153 show/qra <lat> <long> (0)
- 11.154 show/qra <locator> [<locator>] (0)
- 11.155 show/qrz <callsign> (0)
- 11.156 show/route <callsign> ... (0)
- 11.157 show/satellite <name> [<hours> <interval>] (0)
- 11.158 show/station all [<regex>] (6)
- 11.159 show/station [<callsign> ..] (0)
- 11.160 show/sun [ndays] [<prefix>|<callsign>] (0)
- 11.161 show/time [<prefix>|<callsign>] (0)
- 11.162 show/usdb [call ..] (0)
- 11.163 show/vhfstats [days] [date] (0)
- 11.164 show/vhftable [days] [date] [prefix ...] (0)
- 11.165 show/wcy (0)
- 11.166 show/wcy <n> (0)
- 11.167 show/wm7d <callsign> (0)
- 11.168 show/wwv (0)
- 11.169 show/wwv <n> (0)
- 11.170 shutdown (5)
- 11.171 stat/channel [<callsign>] (5)
- 11.172 stat/db <dbname> (5)
- 11.173 stat/msg (1)
- 11.174 stat/msg <msgno> (1)
- 11.175 stat/route_node <callsign> (5)
- 11.176 stat/route_node all (5)
- 11.177 stat/route_user <callsign> (5)
- 11.178 stat/route_user all (5)
- 11.179 stat/user [<callsign>] (5)
- 11.180 sysop (0)
- 11.181 talk <call> > <node> [<text>] (0)
- 11.182 talk <call> [<text>] (0)
- 11.183 type <filearea>/<name> (0)
- 11.184 uncatchup <node call> all|[msgno> ...] (5)
- 11.185 unset/announce (0)
- 11.186 unset/anntalk (0)
- 11.187 unset/baddx <call>.. (8)
- 11.188 unset/badnode <call>.. (8)
- 11.189 unset/badspotter <call>.. (8)
- 11.190 unset/badword <word>.. (8)
- 11.191 unset/beep (0)
- 11.192 unset/dx (0)
- 11.193 unset/dxgrid (0)
- 11.194 unset/dxstate (0)
- 11.195 unset/echo (0)
- 11.196 unset/email (0)
- 11.197 unset/here (0)
- 11.198 unset/hops <call> ann|spots|route|wwv|wcy (8)
- 11.199 unset/logininfo (0)
- 11.200 unset/privilege (0)
- 11.201 unset/prompt (0)
- 11.202 unset/talk (0)
- 11.203 unset/wcy (0)
- 11.204 unset/wwv (0)
- 11.205 unset/wx (0)
- 11.206 who (0)
- 11.207 wx <text> (0)
- 11.208 wx full <text> (0)
- 11.209 wx sysop <text> (5)
+ 11.103 set/dxcq (0)
+ 11.104 set/dxgrid (0)
+ 11.105 set/dxitu (0)
+ 11.106 set/dxnet <call> [<call>..] (5)
+ 11.107 set/echo (0)
+ 11.108 set/email <email> ... (0)
+ 11.109 set/here (0)
+ 11.110 set/homenode <node> (0)
+ 11.111 set/hops <call> ann|spots|route|wwv|wcy <n> (8)
+ 11.112 set/language <lang> (0)
+ 11.113 set/location <lat & long> (0)
+ 11.114 set/logininfo (0)
+ 11.115 set/name <your name> (0)
+ 11.116 set/node <call> [<call>..] (5)
+ 11.117 set/obscount <count> <call> (8)
+ 11.118 set/page <lines per page> (0)
+ 11.119 set/password (0)
+ 11.120 set/prompt <string> (0)
+ 11.121 set/qra <locator> (0)
+ 11.122 set/qth <your qth> (0)
+ 11.123 set/spider <call> [<call>..] (5)
+ 11.124 set/talk (0)
+ 11.125 set/usstate (0)
+ 11.126 set/wcy (0)
+ 11.127 set/wwv (0)
+ 11.128 set/wx (0)
+ 11.129 show/baddx (1)
+ 11.130 show/badnode (1)
+ 11.131 show/badspotter (1)
+ 11.132 show/badword (1)
+ 11.133 show/configuration [<node>] (0)
+ 11.134 show/configuration/node (0)
+ 11.135 show/connect (1)
+ 11.136 show/date [<prefix>|<callsign>] (0)
+ 11.137 show/db0sdx <callsign> (0)
+ 11.138 show/dx (0)
+ 11.139 show/dxcc <prefix> (0)
+ 11.140 show/dxstats [days] [date] (0)
+ 11.141 show/files [<filearea> [<string>]] (0)
+ 11.142 show/filter (0)
+ 11.143 show/hfstats [days] [date] (0)
+ 11.144 show/hftable [days] [date] [prefix ...] (0)
+ 11.145 show/hops <call> [ann|spots|route|wcy|wwv] (8)
+ 11.146 show/isolate (1)
+ 11.147 show/log [<callsign>] (8)
+ 11.148 show/moon [ndays] [<prefix>|<callsign>] (0)
+ 11.149 show/muf <prefix> [<hours>][long] (0)
+ 11.150 show/newconfiguration [<node>] (0)
+ 11.151 show/newconfiguration/node (0)
+ 11.152 show/node [<callsign> ...] (1)
+ 11.153 show/prefix <callsign> (0)
+ 11.154 show/program (5)
+ 11.155 show/qra <lat> <long> (0)
+ 11.156 show/qra <locator> [<locator>] (0)
+ 11.157 show/qrz <callsign> (0)
+ 11.158 show/route <callsign> ... (0)
+ 11.159 show/satellite <name> [<hours> <interval>] (0)
+ 11.160 show/station all [<regex>] (6)
+ 11.161 show/station [<callsign> ..] (0)
+ 11.162 show/sun [ndays] [<prefix>|<callsign>] (0)
+ 11.163 show/time [<prefix>|<callsign>] (0)
+ 11.164 show/usdb [call ..] (0)
+ 11.165 show/vhfstats [days] [date] (0)
+ 11.166 show/vhftable [days] [date] [prefix ...] (0)
+ 11.167 show/wcy (0)
+ 11.168 show/wcy <n> (0)
+ 11.169 show/wm7d <callsign> (0)
+ 11.170 show/wwv (0)
+ 11.171 show/wwv <n> (0)
+ 11.172 shutdown (5)
+ 11.173 stat/channel [<callsign>] (5)
+ 11.174 stat/db <dbname> (5)
+ 11.175 stat/msg (1)
+ 11.176 stat/msg <msgno> (1)
+ 11.177 stat/route_node <callsign> (5)
+ 11.178 stat/route_node all (5)
+ 11.179 stat/route_user <callsign> (5)
+ 11.180 stat/route_user all (5)
+ 11.181 stat/user [<callsign>] (5)
+ 11.182 sysop (0)
+ 11.183 talk <call> > <node> [<text>] (0)
+ 11.184 talk <call> [<text>] (0)
+ 11.185 type <filearea>/<name> (0)
+ 11.186 uncatchup <node call> all|[msgno> ...] (5)
+ 11.187 unset/announce (0)
+ 11.188 unset/anntalk (0)
+ 11.189 unset/baddx <call>.. (8)
+ 11.190 unset/badnode <call>.. (8)
+ 11.191 unset/badspotter <call>.. (8)
+ 11.192 unset/badword <word>.. (8)
+ 11.193 unset/beep (0)
+ 11.194 unset/dx (0)
+ 11.195 unset/dxcq (0)
+ 11.196 unset/dxgrid (0)
+ 11.197 unset/dxitu (0)
+ 11.198 unset/echo (0)
+ 11.199 unset/email (0)
+ 11.200 unset/here (0)
+ 11.201 unset/hops <call> ann|spots|route|wwv|wcy (8)
+ 11.202 unset/logininfo (0)
+ 11.203 unset/privilege (0)
+ 11.204 unset/prompt (0)
+ 11.205 unset/talk (0)
+ 11.206 unset/usstate (0)
+ 11.207 unset/wcy (0)
+ 11.208 unset/wwv (0)
+ 11.209 unset/wx (0)
+ 11.210 who (0)
+ 11.211 wx <text> (0)
+ 11.212 wx full <text> (0)
+ 11.213 wx sysop <text> (5)
______________________________________________________________________
a lot better for not getting involved. If you are successfully using
isolation then you also probably don't need to use route filtering.
-
To put it simply, you should not mix Isolation and Route Filtering.
It will work, of sorts, but you will not get the expected results. If
you are using Isolation sucessfully at the moment, do not get involved
channel_zone <numbers>
-
Please be careful if you alter this setting, it will affect ALL your
links! Remember, this is a default filter for node connections, not a
per link default.
set/dx Allow DX messages to come out on your terminal
- 11.103. set/dxgrid (0)
+ 11.103. set/dxcq (0)
+
+ set/dxcq Show CQ Zones on the end of DX announcements
+
+
+ 11.104. set/dxgrid (0)
set/dxgrid Allow QRA Grid Squares on the end of DX announcements
- 11.104. set/dxnet <call> [<call>..] (5)
- set/dxnet <call> [<call>..] Make the callsign an DXNet node
+ 11.105. set/dxitu (0)
+ set/dxitu Show ITU Zones on the end of DX announcements
- 11.105. set/dxstate (0)
+ 11.106. set/dxnet <call> [<call>..] (5)
- set/dxstate Allow US State info on the end of DX announcements
+ set/dxnet <call> [<call>..] Make the callsign an DXNet node
- 11.106. set/echo (0)
+ 11.107. set/echo (0)
set/echo Make the cluster echo your input
- 11.107. set/email <email> ... (0)
+ 11.108. set/email <email> ... (0)
set/email <email> ... Set email address(es) and forward your personals
- 11.108. set/here (0)
+ 11.109. set/here (0)
set/here Tell the system you are present at your terminal
- 11.109. set/homenode <node> (0)
+ 11.110. set/homenode <node> (0)
set/homenode <node> Set your normal cluster callsign
- 11.110. set/hops <call> ann|spots|route|wwv|wcy <n> (8)
+ 11.111. set/hops <call> ann|spots|route|wwv|wcy <n> (8)
set/hops <call> ann|spots|route|wwv|wcy <n> Set hop count
- 11.111. set/language <lang> (0)
+ 11.112. set/language <lang> (0)
set/language <lang> Set the language you want to use
Currentlythe languages available are en (English), de (German), es
(Spanish) and nl (Dutch).
- 11.112. set/location <lat & long> (0)
+ 11.113. set/location <lat & long> (0)
set/location <lat & long> Set your latitude and longitude
- 11.113. set/logininfo (0)
+ 11.114. set/logininfo (0)
set/logininfo Inform when a station logs in locally
- 11.114. set/name <your name> (0)
+ 11.115. set/name <your name> (0)
set/name <your name> Set your name
SET/NAME Dirk
- 11.115. set/node <call> [<call>..] (5)
+
+
+ 11.116. set/node <call> [<call>..] (5)
set/node <call> [<call>..] Make the callsign an AK1A cluster
Tell the system that the call(s) are to be treated as AK1A cluster
andfed PC Protocol rather normal user commands.
- 11.116. set/obscount <count> <call> (8)
+ 11.117. set/obscount <count> <call> (8)
set/obscount <count> <call> Set the 'pump-up' obscelence PING counter
between 1 and 9.It is STRONGLY recommended that you don't change the
default.
- 11.117. set/page <lines per page> (0)
+ 11.118. set/page <lines per page> (0)
set/page <lines per page> Set the lines per page
The setting is stored in your user profile.
- 11.118. set/password (0)
+ 11.119. set/password (0)
set/password Set your own password
the screenas you type, depending on the type of telnet client you
have.
- 11.119. set/prompt <string> (0)
+ 11.120. set/prompt <string> (0)
set/prompt <string> Set your prompt to <string>
- 11.120. set/qra <locator> (0)
+
+ 11.121. set/qra <locator> (0)
set/qra <locator> Set your QRA Grid locator
roughlycorrectly (assuming your locator is correct ;-). For example:-
+ SET/QRA JO02LQ
- SET/QRA JO02LQ
-
- 11.121. set/qth <your qth> (0)
+ 11.122. set/qth <your qth> (0)
set/qth <your qth> Set your QTH
- 11.122. set/spider <call> [<call>..] (5)
+ 11.123. set/spider <call> [<call>..] (5)
set/spider <call> [<call>..] Make the callsign an DXSpider node
Tell the system that the call(s) are to be treated as DXSpider node
andfed new style DX Protocol rather normal user commands.
- 11.123. set/talk (0)
+ 11.124. set/talk (0)
set/talk Allow TALK messages to come out on your terminal
- 11.124. set/wcy (0)
+ 11.125. set/usstate (0)
+
+ set/usstate Allow US State info on the end of DX announcements
+
+
+ 11.126. set/wcy (0)
set/wcy Allow WCY messages to come out on your terminal
- 11.125. set/wwv (0)
+ 11.127. set/wwv (0)
set/wwv Allow WWV messages to come out on your terminal
- 11.126. set/wx (0)
+ 11.128. set/wx (0)
set/wx Allow WX messages to come out on your terminal
- 11.127. show/baddx (1)
+ 11.129. show/baddx (1)
show/baddx Show all the bad dx calls in the system
Display all the bad dx callsigns in the system, see SET/BADDXfor more
information.
- 11.128. show/badnode (1)
+
+ 11.130. show/badnode (1)
show/badnode Show all the bad nodes in the system
Display all the bad node callsigns in the system, see SET/BADNODEfor
more information.
- 11.129. show/badspotter (1)
+ 11.131. show/badspotter (1)
show/badspotter Show all the bad spotters in the system
Display all the bad spotter's callsigns in the system, see
SET/BADSPOTTERfor more information.
-
- 11.130. show/badword (1)
+ 11.132. show/badword (1)
show/badword Show all the bad words in the system
Display all the bad words in the system, see SET/BADWORDfor more
information.
- 11.131. show/configuration [<node>] (0)
+ 11.133. show/configuration [<node>] (0)
show/configuration [<node>] Show all the nodes and users visible
- 11.132. show/configuration/node (0)
+ 11.134. show/configuration/node (0)
show/configuration/node Show all the nodes connected locally
Show all the nodes connected to this node.
- 11.133. show/connect (1)
+ 11.135. show/connect (1)
show/connect Show all the active connections
This command shows information on all the active connections known
tothe node. This command gives slightly more information than WHO.
- 11.134. show/date [<prefix>|<callsign>] (0)
+
+ 11.136. show/date [<prefix>|<callsign>] (0)
show/date [<prefix>|<callsign>] Show the local time
show UTC and UTC + the local offset (not including DST) atthe prefixes
or callsigns that you specify.
- 11.135. show/db0sdx <callsign> (0)
+ 11.137. show/db0sdx <callsign> (0)
show/db0sdx <callsign> Show QSL infomation from DB0SDX database
for users of this software by http://www.qslinfo.de.See also SHOW/QRZ,
SHOW/WM7D.
- 11.136. show/dx (0)
+ 11.138. show/dx (0)
show/dx Interrogate the spot database
- qsl - this automatically looks for any qsl info on the call held in the spot database.
+ qsl - this automatically looks for any qsl info on the call held in the spot database.
qra [<locator>] - this will look for the specific locator if you specify one or else anything that looks like a locator.
+
dxcc - treat the prefix as a 'country' and look for spots from that country regardless of actual prefix. eg dxcc oq2
- 11.13
7. show/dxcc <prefix> (0)
+ 11.13
9. show/dxcc <prefix> (0)
show/dxcc <prefix> Interrogate the spot database by country
- 11.138. show/dxstats [days] [date] (0)
+ 11.140. show/dxstats [days] [date] (0)
show/dxstats [days] [date] Show the DX Statistics
Show the total DX spots for the last <days> no of days (default is
31), starting from a <date> (default: today).
- 11.139. show/files [<filearea> [<string>]] (0)
+ 11.141. show/files [<filearea> [<string>]] (0)
show/files [<filearea> [<string>]] List the contents of a filearea
See also TYPE - to see the contents of a file.
- 11.140. show/filter (0)
+ 11.142. show/filter (0)
show/filter Show the contents of all the filters you have set
Show the contents of all the filters that are set. This command
displaysall the filters set - for all the various categories.
- 11.141. show/hfstats [days] [date] (0)
+ 11.143. show/hfstats [days] [date] (0)
show/hfstats [days] [date] Show the HF DX Statistics
Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).
- 11.142. show/hftable [days] [date] [prefix ...] (0)
+ 11.144. show/hftable [days] [date] [prefix ...] (0)
show/hftable [days] [date] [prefix ...] Show the HF DX Spotter Table
haveto list all possible prefixes for each country.If you want more or
less days than the default simply include thenumber you require:-
-
- sh/hftable 20 pa
+ sh/hftable 20 pa
printthe worldwide statistics.
+ sh/hftable all
- sh/hftable all
-
- 11.143. show/hops <call> [ann|spots|route|wcy|wwv] (8)
+ 11.145. show/hops <call> [ann|spots|route|wcy|wwv] (8)
show/hops <call> [ann|spots|route|wcy|wwv] Show the hop counts for a
node
specifywhich category you want to see. If you leave the category out
then all the categories will be listed.
- 11.144. show/isolate (1)
+ 11.146. show/isolate (1)
show/isolate Show list of ISOLATED nodes
- 11.145. show/log [<callsign>] (8)
+ 11.147. show/log [<callsign>] (8)
show/log [<callsign>] Show excerpts from the system log
will output a general logfile. With the optional callsign it willshow
output from the log associated with that callsign.
- 11.14
6. show/moon [ndays] [<prefix>|<callsign>] (0)
+ 11.14
8. show/moon [ndays] [<prefix>|<callsign>] (0)
show/moon [ndays] [<prefix>|<callsign>] Show Moon rise and set times
You can also use this command to see into the past or the future, soif
you want to see yesterday's times then do:-
-
- SH/MOON -1
+ SH/MOON -1
note that the rise and set times are given as the UT times of rise and
set on the requested UT day.
-
-
- 11.147. show/muf <prefix> [<hours>][long] (0)
+ 11.149. show/muf <prefix> [<hours>][long] (0)
show/muf <prefix> [<hours>][long] Show the likely propagation to a
prefix
80m but usable signals on 40m (about S3).inputing:-
- SH/MUF W 24
+
+ SH/MUF W 24
Itshould be noted that the figures will probably not be very useful,
norterrible accurate, but it is included for completeness.
- 11.148. show/newconfiguration [<node>] (0)
+ 11.150. show/newconfiguration [<node>] (0)
show/newconfiguration [<node>] Show all the nodes and users visible
different formatwhich may not take up quite as much space if you don't
have anyloops.BE WARNED: the list that is returned can be VERY long
- 11.149. show/newconfiguration/node (0)
+ 11.151. show/newconfiguration/node (0)
show/newconfiguration/node Show all the nodes connected locally
Show all the nodes connected to this node in the new format.
- 11.150. show/node [<callsign> ...] (1)
+ 11.152. show/node [<callsign> ...] (1)
show/node [<callsign> ...] Show the type and version number of nodes
thecommand line. If no callsigns are specified then a sorted list of
allthe non-user callsigns known to the system will be displayed.
- 11.151. show/prefix <callsign> (0)
+ 11.153. show/prefix <callsign> (0)
show/prefix <callsign> Interrogate the prefix database
with the internal country no, the CQ and ITU regions. See also
SHOW/DXCC
- 11.152. show/program (5)
+ 11.154. show/program (5)
show/program Show the locations of all the included program modules
Thisis useful for checking where you think you have loaded a .pm file
from.
- 11.153. show/qra <lat> <long> (0)
+ 11.155. show/qra <lat> <long> (0)
show/qra <lat> <long> Convert lat/long to a QRA Grid locator
argument, forexample:-
+ SH/QRA 52 41 N 0 58 E
- SH/QRA 52 41 N 0 58 E
-
- 11.154. show/qra <locator> [<locator>] (0)
+ 11.156. show/qra <locator> [<locator>] (0)
show/qra <locator> [<locator>] Show distance between QRA Grid locators
- 11.155. show/qrz <callsign> (0)
+ 11.157. show/qrz <callsign> (0)
show/qrz <callsign> Show any callbook details on a callsign
provided for users of this software by http://www.qrz.com See also
SHOW/WM7D for an alternative.
- 11.156. show/route <callsign> ... (0)
+ 11.158. show/route <callsign> ... (0)
show/route <callsign> ... Show the route to the callsign
- 11.157. show/satellite <name> [<hours> <interval>] (0)
+ 11.159. show/satellite <name> [<hours> <interval>] (0)
show/satellite <name> [<hours> <interval>] Show tracking data
- 11.158. show/station all [<regex>] (6)
+ 11.160. show/station all [<regex>] (6)
show/station all [<regex>] Show list of users in the system
- 11.159. show/station [<callsign> ..] (0)
+ 11.161. show/station [<callsign> ..] (0)
show/station [<callsign> ..] Show information about a callsign
where)that callsign is connected to the cluster.
-
- SH/ST G1TLH
+ SH/ST G1TLH
If no callsign is given then show the information for yourself.
- 11.16
0. show/sun [ndays] [<prefix>|<callsign>] (0)
+ 11.16
2. show/sun [ndays] [<prefix>|<callsign>] (0)
show/sun [ndays] [<prefix>|<callsign>] Show sun rise and set times
note that the rise and set times are given as the UT times of rise and
set on the requested UT day.
- 11.16
1. show/time [<prefix>|<callsign>] (0)
+ 11.16
3. show/time [<prefix>|<callsign>] (0)
show/time [<prefix>|<callsign>] Show the local time
prefixesthen it will show UTC and UTC + the local offset (not
including DST) atthe prefixes or callsigns that you specify.
- 11.162. show/usdb [call ..] (0)
+
+
+ 11.164. show/usdb [call ..] (0)
show/usdb [call ..] Show information held on the FCC Call database
- 11.163. show/vhfstats [days] [date] (0)
+ 11.165. show/vhfstats [days] [date] (0)
show/vhfstats [days] [date] Show the VHF DX Statistics
Show the VHF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a date (default: today).
- 11.164. show/vhftable [days] [date] [prefix ...] (0)
+ 11.166. show/vhftable [days] [date] [prefix ...] (0)
show/vhftable [days] [date] [prefix ...] Show the VHF DX Spotter Table
- 11.165. show/wcy (0)
+ 11.167. show/wcy (0)
show/wcy Show last 10 WCY broadcasts
- 11.166. show/wcy <n> (0)
+ 11.168. show/wcy <n> (0)
show/wcy <n> Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the
system
-
-
- 11.167. show/wm7d <callsign> (0)
+ 11.169. show/wm7d <callsign> (0)
show/wm7d <callsign> Show callbook details on a US callsigns
provided for users of this software by http://www.wm7d.net.See also
SHOW/QRZ.
- 11.168. show/wwv (0)
+ 11.170. show/wwv (0)
show/wwv Show last 10 WWV broadcasts
- 11.169. show/wwv <n> (0)
+ 11.171. show/wwv <n> (0)
show/wwv <n> Show last <n> WWV broadcasts
Display the most recent WWV information that has been received by the
system
- 11.170. shutdown (5)
+ 11.172. shutdown (5)
shutdown Shutdown the cluster
Shutdown the cluster and disconnect all the users
- 11.171. stat/channel [<callsign>] (5)
+ 11.173. stat/channel [<callsign>] (5)
stat/channel [<callsign>] Show the status of a channel on the cluster
that you are on or else for the callsign that you asked for.Only the
fields that are defined (in perl term) will be displayed.
- 11.172. stat/db <dbname> (5)
+ 11.174. stat/db <dbname> (5)
stat/db <dbname> Show the status of a database
privilege level you will see more or less information. This command is
unlikely to be of much use to anyone other than a sysop.
- 11.173. stat/msg (1)
+ 11.175. stat/msg (1)
stat/msg Show the status of the message system
- 11.174. stat/msg <msgno> (1)
+ 11.176. stat/msg <msgno> (1)
stat/msg <msgno> Show the status of a message
etc.If no message number is given then the status of the message
system is displayed.
- 11.175. stat/route_node <callsign> (5)
+ 11.177. stat/route_node <callsign> (5)
stat/route_node <callsign> Show the data in a Route::Node object
- 11.176. stat/route_node all (5)
+ 11.178. stat/route_node all (5)
stat/route_node all Show list of all Route::Node objects
- 11.177. stat/route_user <callsign> (5)
+
+ 11.179. stat/route_user <callsign> (5)
stat/route_user <callsign> Show the data in a Route::User object
- 11.178. stat/route_user all (5)
+ 11.180. stat/route_user all (5)
stat/route_user all Show list of all Route::User objects
- 11.179. stat/user [<callsign>] (5)
+ 11.181. stat/user [<callsign>] (5)
stat/user [<callsign>] Show the full status of a user
flagsand stuff.Only the fields that are defined (in perl term) will be
displayed.
- 11.180. sysop (0)
+ 11.182. sysop (0)
sysop Regain your privileges if you login remotely
offerednumbers but nothing will happen when you input a string. Any
match iscase sensitive.
- 11.181. talk <call> > <node> [<text>] (0)
+ 11.183. talk <call> > <node> [<text>] (0)
talk <call> > <node> [<text>] Send a text message to another station
via a node
will send the hftable as you have it to all the people you are cur-
rently talking to.
- 11.182. talk <call> [<text>] (0)
+ 11.184. talk <call> [<text>] (0)
talk <call> [<text>] Send a text message to another station
- 11.183. type <filearea>/<name> (0)
+ 11.185. type <filearea>/<name> (0)
type <filearea>/<name> Look at the contents of a file in one of the
fileareas
See also SHOW/FILES to see what fileareas are available and a list of
content.
- 11.184. uncatchup <node call> all|[msgno> ...] (5)
+
+
+ 11.186. uncatchup <node call> all|[msgno> ...] (5)
uncatchup <node call> all|[msgno> ...] Unmark a message as sent
catchup GB7DJK all catchup GB7DJK 300 301 302 303 500-510
+
and to undo what you have just done:-
which will arrange for them to be forward candidates again.Order is
not important.
- 11.185. unset/announce (0)
+ 11.187. unset/announce (0)
unset/announce Stop announce messages coming out on your terminal
- 11.186. unset/anntalk (0)
+ 11.188. unset/anntalk (0)
unset/anntalk Stop talk like announce messages on your terminal
allows you to see them again. This is the default.
- 11.187. unset/baddx <call>.. (8)
+ 11.189. unset/baddx <call>.. (8)
unset/baddx <call>.. Propagate a dx spot with this callsign again
allowed eg:-
- set/baddx FORSALE VIDEO FR0G
+
+ set/baddx FORSALE VIDEO FR0G
- 11.188. unset/badnode <call>.. (8)
+ 11.190. unset/badnode <call>.. (8)
unset/badnode <call>.. Allow spots from this node again
-
Setting a callsign as a 'badnode' will prevent spots from that node
going any further. They will not be displayed and they will not be
sent onto other nodes.The call must be a full eg:-
will allow spots from him again.Use with extreme care. This command
may well be superceeded by FILTERing.
- 11.189. unset/badspotter <call>.. (8)
+ 11.191. unset/badspotter <call>.. (8)
unset/badspotter <call>.. Allow spots from this callsign again
will allow spots from him again.Use with extreme care. This command
may well be superceded by FILTERing.
- 11.190. unset/badword <word>.. (8)
+ 11.192. unset/badword <word>.. (8)
unset/badword <word>.. Propagate things with this word again
unset/badword annihilated
+
will allow text with this word again.
- 11.191. unset/beep (0)
+ 11.193. unset/beep (0)
unset/beep Stop beeps for DX and other messages on your terminal
- 11.192. unset/dx (0)
+ 11.194. unset/dx (0)
unset/dx Stop DX messages coming out on your terminal
- 11.193. unset/dxgrid (0)
+ 11.195. unset/dxcq (0)
+
+ unset/dxcq Stop CQ Zones on the end of DX announcements
+
+ Display both the Spotter's and the Spotted's CQ Zone on the endof a DX
+ announcement (there is just enough room). Some user programscannot
+ cope with this. The Spotter's CQ is on the RHS of the time, the
+ Spotted's CQ is on the LHS.Conflicts with: SET/DXGRID, SET/DXITU,
+ SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are
+ confused.
+
+ 11.196. unset/dxgrid (0)
unset/dxgrid Stop QRA Grid Squares on the end of DX announcements
if the spotter's grid square is known it is output on the endof a DX
announcement (there is just enough room). Some user programscannot
cope with this. You can use this command to reset (or set)this
- feature.
+ feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which
+ flags you have set if you are confused.
- 11.194. unset/dxstate (0)
+ 11.197. unset/dxitu (0)
- unset/dxstate Stop US State info on the end of DX announcements
+ unset/dxitu Stop ITU Zones on the end of DX announcements
- If the spotter's or spotted's US State is known it is output on the
- end of a DX announcement (there is just enough room). A spotter's
- state will appear on the RHS of the time (like SET/DXGRID) and the
- spotted's State will appear on the LHS of thetime field. Any
- information found will override any locator information from
- SET/DXGRID.Some user programs cannot cope with this. You can use this
- command to reset (or set) this feature.
+ Display both the Spotter's and the Spotted's ITU Zone on the endof a
+ DX announcement (there is just enough room). Some user programscannot
+ cope with this. The Spotter's ITU is on the RHS of the time, the
+ Spotted's ITU is on the LHS.Conflicts with: SET/DXGRID, SET/DXCQ,
+ SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are
+ confused.
- 11.195. unset/echo (0)
+ 11.198. unset/echo (0)
unset/echo Stop the cluster echoing your input
setting appropriately. The setting is stored in your user profile.YOU
DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- 11.196. unset/email (0)
+ 11.199. unset/email (0)
unset/email Stop personal msgs being forwarded by email
- 11.197. unset/here (0)
+ 11.200. unset/here (0)
unset/here Tell the system you are absent from your terminal
- 11.198. unset/hops <call> ann|spots|route|wwv|wcy (8)
+ 11.201. unset/hops <call> ann|spots|route|wwv|wcy (8)
unset/hops <call> ann|spots|route|wwv|wcy Unset hop count
- 11.199. unset/logininfo (0)
+ 11.202. unset/logininfo (0)
unset/logininfo Inform when a station logs out locally
- 11.200. unset/privilege (0)
+ 11.203. unset/privilege (0)
unset/privilege Remove any privilege for this session
will need toeither logout and login again (if you are on a console) or
use theSYSOP command.
- 11.201. unset/prompt (0)
+ 11.204. unset/prompt (0)
unset/prompt Set your prompt back to default
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back
tonormal.
- 11.202. unset/talk (0)
+ 11.205. unset/talk (0)
unset/talk Stop TALK messages coming out on your terminal
+ 11.206. unset/usstate (0)
+
+ unset/usstate Stop US State info on the end of DX announcements
+
+ If the spotter's or spotted's US State is known it is output on the
+ end of a DX announcement (there is just enough room). A spotter's
+ state will appear on the RHS of the time (like SET/DXGRID) and the
+ spotted's State will appear on the LHS of thetime field. Any
+ information found will override any locator information from
+ SET/DXGRID.Some user programs cannot cope with this. You can use this
+ command to reset (or set) this feature.Conflicts with: SET/DXCQ,
+ SET/DXITUDo a STAT/USER to see which flags you have set if you are
+ confused.
- 11.203. unset/wcy (0)
+ 11.207. unset/wcy (0)
unset/wcy Stop WCY messages coming out on your terminal
- 11.204. unset/wwv (0)
+ 11.208. unset/wwv (0)
unset/wwv Stop WWV messages coming out on your terminal
- 11.205. unset/wx (0)
+ 11.209. unset/wx (0)
unset/wx Stop WX messages coming out on your terminal
- 11.206. who (0)
+ 11.210. who (0)
who Show who is physically connected
This is a quick listing that shows which callsigns are connected
andwhat sort of connection they have
- 11.207. wx <text> (0)
+
+
+ 11.211. wx <text> (0)
wx <text> Send a weather message to local users
- 11.208. wx full <text> (0)
+ 11.212. wx full <text> (0)
wx full <text> Send a weather message to all cluster users
- 11.209. wx sysop <text> (5)
+ 11.213. wx sysop <text> (5)
wx sysop <text> Send a weather message to other clusters only
12.56 set/anntalk
12.57 set/beep
12.58 set/dx
- 12.59 set/dxgrid
- 12.60 set/dxstate
- 12.61 set/echo
- 12.62 set/email <email> ...
- 12.63 set/here
- 12.64 set/homenode <node>
- 12.65 set/language <lang>
- 12.66 set/location <lat & long>
- 12.67 set/logininfo
- 12.68 set/name <your name>
- 12.69 set/page <lines per page>
- 12.70 set/password
- 12.71 set/prompt <string>
- 12.72 set/qra <locator>
- 12.73 set/qth <your qth>
- 12.74 set/talk
- 12.75 set/wcy
- 12.76 set/wwv
- 12.77 set/wx
- 12.78 show/configuration [<node>]
- 12.79 show/configuration/node
- 12.80 show/date [<prefix>|<callsign>]
- 12.81 show/db0sdx <callsign>
- 12.82 show/dx
- 12.83 show/dxcc <prefix>
- 12.84 show/dxstats [days] [date]
- 12.85 show/files [<filearea> [<string>]]
- 12.86 show/filter
- 12.87 show/hfstats [days] [date]
- 12.88 show/hftable [days] [date] [prefix ...]
- 12.89 show/moon [ndays] [<prefix>|<callsign>]
- 12.90 show/muf <prefix> [<hours>][long]
- 12.91 show/newconfiguration [<node>]
- 12.92 show/newconfiguration/node
- 12.93 show/prefix <callsign>
- 12.94 show/qra <lat> <long>
- 12.95 show/qra <locator> [<locator>]
- 12.96 show/qrz <callsign>
- 12.97 show/route <callsign> ...
- 12.98 show/satellite <name> [<hours> <interval>]
- 12.99 show/station [<callsign> ..]
- 12.100 show/sun [ndays] [<prefix>|<callsign>]
- 12.101 show/time [<prefix>|<callsign>]
- 12.102 show/usdb [call ..]
- 12.103 show/vhfstats [days] [date]
- 12.104 show/vhftable [days] [date] [prefix ...]
- 12.105 show/wcy
- 12.106 show/wcy <n>
- 12.107 show/wm7d <callsign>
- 12.108 show/wwv
- 12.109 show/wwv <n>
- 12.110 sysop
- 12.111 talk <call> > <node> [<text>]
- 12.112 talk <call> [<text>]
- 12.113 type <filearea>/<name>
- 12.114 unset/announce
- 12.115 unset/anntalk
- 12.116 unset/beep
- 12.117 unset/dx
- 12.118 unset/dxgrid
- 12.119 unset/dxstate
- 12.120 unset/echo
- 12.121 unset/email
- 12.122 unset/here
- 12.123 unset/logininfo
- 12.124 unset/privilege
- 12.125 unset/prompt
- 12.126 unset/talk
- 12.127 unset/wcy
- 12.128 unset/wwv
- 12.129 unset/wx
- 12.130 who
- 12.131 wx <text>
- 12.132 wx full <text>
+ 12.59 set/dxcq
+ 12.60 set/dxgrid
+ 12.61 set/dxitu
+ 12.62 set/echo
+ 12.63 set/email <email> ...
+ 12.64 set/here
+ 12.65 set/homenode <node>
+ 12.66 set/language <lang>
+ 12.67 set/location <lat & long>
+ 12.68 set/logininfo
+ 12.69 set/name <your name>
+ 12.70 set/page <lines per page>
+ 12.71 set/password
+ 12.72 set/prompt <string>
+ 12.73 set/qra <locator>
+ 12.74 set/qth <your qth>
+ 12.75 set/talk
+ 12.76 set/usstate
+ 12.77 set/wcy
+ 12.78 set/wwv
+ 12.79 set/wx
+ 12.80 show/configuration [<node>]
+ 12.81 show/configuration/node
+ 12.82 show/date [<prefix>|<callsign>]
+ 12.83 show/db0sdx <callsign>
+ 12.84 show/dx
+ 12.85 show/dxcc <prefix>
+ 12.86 show/dxstats [days] [date]
+ 12.87 show/files [<filearea> [<string>]]
+ 12.88 show/filter
+ 12.89 show/hfstats [days] [date]
+ 12.90 show/hftable [days] [date] [prefix ...]
+ 12.91 show/moon [ndays] [<prefix>|<callsign>]
+ 12.92 show/muf <prefix> [<hours>][long]
+ 12.93 show/newconfiguration [<node>]
+ 12.94 show/newconfiguration/node
+ 12.95 show/prefix <callsign>
+ 12.96 show/qra <lat> <long>
+ 12.97 show/qra <locator> [<locator>]
+ 12.98 show/qrz <callsign>
+ 12.99 show/route <callsign> ...
+ 12.100 show/satellite <name> [<hours> <interval>]
+ 12.101 show/station [<callsign> ..]
+ 12.102 show/sun [ndays] [<prefix>|<callsign>]
+ 12.103 show/time [<prefix>|<callsign>]
+ 12.104 show/usdb [call ..]
+ 12.105 show/vhfstats [days] [date]
+ 12.106 show/vhftable [days] [date] [prefix ...]
+ 12.107 show/wcy
+ 12.108 show/wcy <n>
+ 12.109 show/wm7d <callsign>
+ 12.110 show/wwv
+ 12.111 show/wwv <n>
+ 12.112 sysop
+ 12.113 talk <call> > <node> [<text>]
+ 12.114 talk <call> [<text>]
+ 12.115 type <filearea>/<name>
+ 12.116 unset/announce
+ 12.117 unset/anntalk
+ 12.118 unset/beep
+ 12.119 unset/dx
+ 12.120 unset/dxcq
+ 12.121 unset/dxgrid
+ 12.122 unset/dxitu
+ 12.123 unset/echo
+ 12.124 unset/email
+ 12.125 unset/here
+ 12.126 unset/logininfo
+ 12.127 unset/privilege
+ 12.128 unset/prompt
+ 12.129 unset/talk
+ 12.130 unset/usstate
+ 12.131 unset/wcy
+ 12.132 unset/wwv
+ 12.133 unset/wx
+ 12.134 who
+ 12.135 wx <text>
+ 12.136 wx full <text>
______________________________________________________________________
mode, where several stations can talk to each other in the same way.
Of course, the DX is still posted to you all the while!
-
-
1\b1.\b.2\b2.\b. S\bSo\bo w\bwh\bha\bat\bt i\bis\bs D\bDX\bXS\bSp\bpi\bid\bde\ber\br?\b?
PacketCluster nodes have been around since roughly 1985. The original
- 1\b12\b2.\b.5\b59\b9.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd
+ 1\b12\b2.\b.5\b59\b9.\b. s\bse\bet\bt/\b/d\bdx\bxc\bcq\bq
+
+ s\bse\bet\bt/\b/d\bdx\bxc\bcq\bq Show CQ Zones on the end of DX announcements
+
+
+
+ 1\b12\b2.\b.6\b60\b0.\b. s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd
s\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd Allow QRA Grid Squares on the end of DX announcements
- 1\b12\b2.\b.6\b60\b0.\b. s\bse\bet\bt/\b/d\bdx\bxs\bst\bta\bat\bte\be
+ 1\b12\b2.\b.6\b61\b1.\b. s\bse\bet\bt/\b/d\bdx\bxi\bit\btu\bu
- s\bse\bet\bt/\b/d\bdx\bxs\bst\bta\bat\bte\be Allow US State info on the end of DX announcements
+ s\bse\bet\bt/\b/d\bdx\bxi\bit\btu\bu Show ITU Zones on the end of DX announcements
- 1\b12\b2.\b.6\b61\b1.\b. s\bse\bet\bt/\b/e\bec\bch\bho\bo
+ 1\b12\b2.\b.6\b62\b2.\b. s\bse\bet\bt/\b/e\bec\bch\bho\bo
s\bse\bet\bt/\b/e\bec\bch\bho\bo Make the cluster echo your input
- 1\b12\b2.\b.6\b62\b2.\b. s\bse\bet\bt/\b/e\bem\bma\bai\bil\bl <\b<e\bem\bma\bai\bil\bl>\b> .\b..\b..\b.
+ 1\b12\b2.\b.6\b63\b3.\b. s\bse\bet\bt/\b/e\bem\bma\bai\bil\bl <\b<e\bem\bma\bai\bil\bl>\b> .\b..\b..\b.
s\bse\bet\bt/\b/e\bem\bma\bai\bil\bl <\b<e\bem\bma\bai\bil\bl>\b> .\b..\b..\b. Set email address(es) and forward your personals
- 1\b12\b2.\b.6\b63\b3.\b. s\bse\bet\bt/\b/h\bhe\ber\bre\be
+ 1\b12\b2.\b.6\b64\b4.\b. s\bse\bet\bt/\b/h\bhe\ber\bre\be
s\bse\bet\bt/\b/h\bhe\ber\bre\be Tell the system you are present at your terminal
- 1\b12\b2.\b.6\b64\b4.\b. s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be <\b<n\bno\bod\bde\be>\b>
+ 1\b12\b2.\b.6\b65\b5.\b. s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be <\b<n\bno\bod\bde\be>\b>
s\bse\bet\bt/\b/h\bho\bom\bme\ben\bno\bod\bde\be <\b<n\bno\bod\bde\be>\b> Set your normal cluster callsign
- 1\b12\b2.\b.6\b65\b5.\b. s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be <\b<l\bla\ban\bng\bg>\b>
+ 1\b12\b2.\b.6\b66\b6.\b. s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be <\b<l\bla\ban\bng\bg>\b>
s\bse\bet\bt/\b/l\bla\ban\bng\bgu\bua\bag\bge\be <\b<l\bla\ban\bng\bg>\b> Set the language you want to use
Currently the languages available are en (English), de (German), es
(Spanish) and nl (Dutch).
- 1\b12\b2.\b.6\b66\b6.\b. s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt &\b& l\blo\bon\bng\bg>\b>
+ 1\b12\b2.\b.6\b67\b7.\b. s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt &\b& l\blo\bon\bng\bg>\b>
s\bse\bet\bt/\b/l\blo\boc\bca\bat\bti\bio\bon\bn <\b<l\bla\bat\bt &\b& l\blo\bon\bng\bg>\b> Set your latitude and longitude
- 1\b12\b2.\b.6\b67\b7.\b. s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo
+ 1\b12\b2.\b.6\b68\b8.\b. s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo
s\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo Inform when a station logs in locally
-
- 1\b12\b2.\b.6\b68\b8.\b. s\bse\bet\bt/\b/n\bna\bam\bme\be <\b<y\byo\bou\bur\br n\bna\bam\bme\be>\b>
+ 1\b12\b2.\b.6\b69\b9.\b. s\bse\bet\bt/\b/n\bna\bam\bme\be <\b<y\byo\bou\bur\br n\bna\bam\bme\be>\b>
s\bse\bet\bt/\b/n\bna\bam\bme\be <\b<y\byo\bou\bur\br n\bna\bam\bme\be>\b> Set your name
- 1\b12\b2.\b.6\b69\b9.\b. s\bse\bet\bt/\b/p\bpa\bag\bge\be <\b<l\bli\bin\bne\bes\bs p\bpe\ber\br p\bpa\bag\bge\be>\b>
+ 1\b12\b2.\b.7\b70\b0.\b. s\bse\bet\bt/\b/p\bpa\bag\bge\be <\b<l\bli\bin\bne\bes\bs p\bpe\ber\br p\bpa\bag\bge\be>\b>
s\bse\bet\bt/\b/p\bpa\bag\bge\be <\b<l\bli\bin\bne\bes\bs p\bpe\ber\br p\bpa\bag\bge\be>\b> Set the lines per page
The setting is stored in your user profile.
- 1\b12\b2.\b.7\b70\b0.\b. s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd
+ 1\b12\b2.\b.7\b71\b1.\b. s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd
s\bse\bet\bt/\b/p\bpa\bas\bss\bsw\bwo\bor\brd\bd Set your own password
it right). You may or may not see the data echoed on the screen as you
type, depending on the type of telnet client you have.
- 1\b12\b2.\b.7\b71\b1.\b. s\bse\bet\bt/\b/p\bpr\bro\bom\bmp\bpt\bt <\b<s\bst\btr\bri\bin\bng\bg>\b>
+ 1\b12\b2.\b.7\b72\b2.\b. s\bse\bet\bt/\b/p\bpr\bro\bom\bmp\bpt\bt <\b<s\bst\btr\bri\bin\bng\bg>\b>
s\bse\bet\bt/\b/p\bpr\bro\bom\bmp\bpt\bt <\b<s\bst\btr\bri\bin\bng\bg>\b> Set your prompt to <string>
- 1\b12\b2.\b.7\b72\b2.\b. s\bse\bet\bt/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b>
+ 1\b12\b2.\b.7\b73\b3.\b. s\bse\bet\bt/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b>
s\bse\bet\bt/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> Set your QRA Grid locator
- 1\b12\b2.\b.7\b73\b3.\b. s\bse\bet\bt/\b/q\bqt\bth\bh <\b<y\byo\bou\bur\br q\bqt\bth\bh>\b>
+ 1\b12\b2.\b.7\b74\b4.\b. s\bse\bet\bt/\b/q\bqt\bth\bh <\b<y\byo\bou\bur\br q\bqt\bth\bh>\b>
s\bse\bet\bt/\b/q\bqt\bth\bh <\b<y\byo\bou\bur\br q\bqt\bth\bh>\b> Set your QTH
- 1\b12\b2.\b.7\b74\b4.\b. s\bse\bet\bt/\b/t\bta\bal\blk\bk
+ 1\b12\b2.\b.7\b75\b5.\b. s\bse\bet\bt/\b/t\bta\bal\blk\bk
s\bse\bet\bt/\b/t\bta\bal\blk\bk Allow TALK messages to come out on your terminal
- 1\b12\b2.\b.7\b75\b5.\b. s\bse\bet\bt/\b/w\bwc\bcy\by
+ 1\b12\b2.\b.7\b76\b6.\b. s\bse\bet\bt/\b/u\bus\bss\bst\bta\bat\bte\be
+
+ s\bse\bet\bt/\b/u\bus\bss\bst\bta\bat\bte\be Allow US State info on the end of DX announcements
+
+
+
+ 1\b12\b2.\b.7\b77\b7.\b. s\bse\bet\bt/\b/w\bwc\bcy\by
s\bse\bet\bt/\b/w\bwc\bcy\by Allow WCY messages to come out on your terminal
- 1\b12\b2.\b.7\b76\b6.\b. s\bse\bet\bt/\b/w\bww\bwv\bv
+ 1\b12\b2.\b.7\b78\b8.\b. s\bse\bet\bt/\b/w\bww\bwv\bv
s\bse\bet\bt/\b/w\bww\bwv\bv Allow WWV messages to come out on your terminal
- 1\b12\b2.\b.7\b77\b7.\b. s\bse\bet\bt/\b/w\bwx\bx
+ 1\b12\b2.\b.7\b79\b9.\b. s\bse\bet\bt/\b/w\bwx\bx
s\bse\bet\bt/\b/w\bwx\bx Allow WX messages to come out on your terminal
- 1\b12\b2.\b.7\b78\b8.\b. s\bsh\bho\bow\bw/\b/c\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn [\b[<\b<n\bno\bod\bde\be>\b>]\b]
+ 1\b12\b2.\b.8\b80\b0.\b. s\bsh\bho\bow\bw/\b/c\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn [\b[<\b<n\bno\bod\bde\be>\b>]\b]
s\bsh\bho\bow\bw/\b/c\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn [\b[<\b<n\bno\bod\bde\be>\b>]\b] Show all the nodes and users visible
list of the users for that node or list of nodes starting with that
prefix.
+
+
SH/C GB7DJK
- 1\b12\b2.\b.7\b79\b9.\b. s\bsh\bho\bow\bw/\b/c\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn/\b/n\bno\bod\bde\be
+ 1\b12\b2.\b.8\b81\b1.\b. s\bsh\bho\bow\bw/\b/c\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn/\b/n\bno\bod\bde\be
s\bsh\bho\bow\bw/\b/c\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn/\b/n\bno\bod\bde\be Show all the nodes connected locally
Show all the nodes connected to this node.
- 1
\b12
\b2.
\b.8
\b8
0\b0.
\b. s
\bsh
\bho
\bow
\bw/
\b/d
\bda
\bat
\bte
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
+ 1
\b12
\b2.
\b.8
\b8
2\b2.
\b. s
\bsh
\bho
\bow
\bw/
\b/d
\bda
\bat
\bte
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
s
\bsh
\bho
\bow
\bw/
\b/d
\bda
\bat
\bte
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
prefixes then it will show UTC and UTC + the local offset (not
including DST) at the prefixes or callsigns that you specify.
- 1\b12\b2.\b.8\b81\b1.\b. s\bsh\bho\bow\bw/\b/d\bdb\bb0\b0s\bsd\bdx\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
+ 1\b12\b2.\b.8\b83\b3.\b. s\bsh\bho\bow\bw/\b/d\bdb\bb0\b0s\bsd\bdx\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
s\bsh\bho\bow\bw/\b/d\bdb\bb0\b0s\bsd\bdx\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show QSL infomation from DB0SDX database
See also SHOW/QRZ, SHOW/WM7D.
- 1\b12\b2.\b.8\b82\b2.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx
+ 1\b12\b2.\b.8\b84\b4.\b. s\bsh\bho\bow\bw/\b/d\bdx\bx
s\bsh\bho\bow\bw/\b/d\bdx\bx Interrogate the spot database
- on <band> - eg 160m 20m 2m 23cm 6mm
- on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
- on <from>/<to> - eg 1000/4000 14000-30000 (in Khz)
- <from>-<to>
+ on <band> - eg 160m 20m 2m 23cm 6mm
+ on <region> - eg hf vhf uhf shf (see SHOW/BANDS)
+ on <from>/<to> - eg 1000/4000 14000-30000 (in Khz)
+ <from>-<to>
that island.
-
qra [<locator>] - this will look for the specific locator if you specify
one or else anything that looks like a locator.
- 1
\b12
\b2.
\b.8
\b8
3\b3.
\b. s
\bsh
\bho
\bow
\bw/
\b/d
\bdx
\bxc
\bcc
\bc <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>
+ 1
\b12
\b2.
\b.8
\b8
5\b5.
\b. s
\bsh
\bho
\bow
\bw/
\b/d
\bdx
\bxc
\bcc
\bc <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>
s
\bsh
\bho
\bow
\bw/
\b/d
\bdx
\bxc
\bcc
\bc <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> Interrogate the spot database by country
SH/DX dxcc g
SH/DX dxcc w on 20m iota
- 1\b12\b2.\b.8\b84\b4.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b]
+
+
+ 1\b12\b2.\b.8\b86\b6.\b. s\bsh\bho\bow\bw/\b/d\bdx\bxs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b]
s\bsh\bho\bow\bw/\b/d\bdx\bxs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] Show the DX Statistics
Show the total DX spots for the last <days> no of days (default is
31), starting from a <date> (default: today).
- 1\b12\b2.\b.8\b85\b5.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs [\b[<\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b> [\b[<\b<s\bst\btr\bri\bin\bng\bg>\b>]\b]]\b]
+ 1\b12\b2.\b.8\b87\b7.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs [\b[<\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b> [\b[<\b<s\bst\btr\bri\bin\bng\bg>\b>]\b]]\b]
s\bsh\bho\bow\bw/\b/f\bfi\bil\ble\bes\bs [\b[<\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b> [\b[<\b<s\bst\btr\bri\bin\bng\bg>\b>]\b]]\b] List the contents of a filearea
See also TYPE - to see the contents of a file.
- 1\b12\b2.\b.8\b86\b6.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br
+ 1\b12\b2.\b.8\b88\b8.\b. s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br
s\bsh\bho\bow\bw/\b/f\bfi\bil\blt\bte\ber\br Show the contents of all the filters you have set
Show the contents of all the filters that are set. This command
displays all the filters set - for all the various categories.
- 1\b12\b2.\b.8\b87\b7.\b. s\bsh\bho\bow\bw/\b/h\bhf\bfs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b]
+ 1\b12\b2.\b.8\b89\b9.\b. s\bsh\bho\bow\bw/\b/h\bhf\bfs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b]
s\bsh\bho\bow\bw/\b/h\bhf\bfs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] Show the HF DX Statistics
Show the HF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a <date> (default: today).
- 1\b12\b2.\b.8\b88\b8.\b. s\bsh\bho\bow\bw/\b/h\bhf\bft\bta\bab\bbl\ble\be [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] [\b[p\bpr\bre\bef\bfi\bix\bx .\b..\b..\b.]\b]
+
+
+ 1\b12\b2.\b.9\b90\b0.\b. s\bsh\bho\bow\bw/\b/h\bhf\bft\bta\bab\bbl\ble\be [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] [\b[p\bpr\bre\bef\bfi\bix\bx .\b..\b..\b.]\b]
s\bsh\bho\bow\bw/\b/h\bhf\bft\bta\bab\bbl\ble\be [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] [\b[p\bpr\bre\bef\bfi\bix\bx .\b..\b..\b.]\b] Show the HF DX Spotter Table
- 1
\b12
\b2.
\b.
8\b89\b9.
\b. s
\bsh
\bho
\bow
\bw/
\b/m
\bmo
\boo
\bon
\bn [
\b[n
\bnd
\bda
\bay
\bys
\bs]
\b] [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
+ 1
\b12
\b2.
\b.
9\b91\b1.
\b. s
\bsh
\bho
\bow
\bw/
\b/m
\bmo
\boo
\bon
\bn [
\b[n
\bnd
\bda
\bay
\bys
\bs]
\b] [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
s
\bsh
\bho
\bow
\bw/
\b/m
\bmo
\boo
\bon
\bn [
\b[n
\bnd
\bda
\bay
\bys
\bs]
\b] [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show Moon rise and set times
-
Show the Moon rise and set times for a (list of) prefixes or
callsigns, together with the azimuth and elevation of the sun
currently at those locations.
If all else fails it will show the Moonrise and set times for the node
that you are connected to.
+
For example:-
Please note that the rise and set times are given as the UT times of
rise and set on the requested UT day.
- 1
\b12
\b2.
\b.9
\b9
0\b0.
\b. s
\bsh
\bho
\bow
\bw/
\b/m
\bmu
\buf
\bf <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> [
\b[<
\b<h
\bho
\bou
\bur
\brs
\bs>
\b>]
\b][
\b[l
\blo
\bon
\bng
\bg]
\b]
+ 1
\b12
\b2.
\b.9
\b9
2\b2.
\b. s
\bsh
\bho
\bow
\bw/
\b/m
\bmu
\buf
\bf <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> [
\b[<
\b<h
\bho
\bou
\bur
\brs
\bs>
\b>]
\b][
\b[l
\blo
\bon
\bng
\bg]
\b]
s
\bsh
\bho
\bow
\bw/
\b/m
\bmu
\buf
\bf <
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b> [
\b[<
\b<h
\bho
\bou
\bur
\brs
\bs>
\b>]
\b][
\b[l
\blo
\bon
\bng
\bg]
\b] Show the likely propagation to a
prefix
(Zen) and the likely signal strengths. Then for each frequency for
which the system thinks there is a likelihood of a circuit it prints a
value.
+
The value is currently a likely S meter reading based on the
conventional 6dB / S point scale. If the value has a '+' appended it
means that it is 1/2 an S point stronger. If the value is preceeded by
- SH/MUF W L 24
- SH/MUF W 24 Long
+ SH/MUF W L 24
+ SH/MUF W 24 Long
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
- 1\b12\b2.\b.9\b91\b1.\b. s\bsh\bho\bow\bw/\b/n\bne\bew\bwc\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn [\b[<\b<n\bno\bod\bde\be>\b>]\b]
+ 1\b12\b2.\b.9\b93\b3.\b. s\bsh\bho\bow\bw/\b/n\bne\bew\bwc\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn [\b[<\b<n\bno\bod\bde\be>\b>]\b]
s\bsh\bho\bow\bw/\b/n\bne\bew\bwc\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn [\b[<\b<n\bno\bod\bde\be>\b>]\b] Show all the nodes and users visible
-
This command allows you to see all the users that can be seen and the
nodes to which they are connected.
BE WARNED: the list that is returned can be VERY long
- 1\b12\b2.\b.9\b92\b2.\b. s\bsh\bho\bow\bw/\b/n\bne\bew\bwc\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn/\b/n\bno\bod\bde\be
+ 1\b12\b2.\b.9\b94\b4.\b. s\bsh\bho\bow\bw/\b/n\bne\bew\bwc\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn/\b/n\bno\bod\bde\be
s\bsh\bho\bow\bw/\b/n\bne\bew\bwc\bco\bon\bnf\bfi\big\bgu\bur\bra\bat\bti\bio\bon\bn/\b/n\bno\bod\bde\be Show all the nodes connected locally
Show all the nodes connected to this node in the new format.
- 1\b12\b2.\b.9\b93\b3.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
+ 1\b12\b2.\b.9\b95\b5.\b. s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
s\bsh\bho\bow\bw/\b/p\bpr\bre\bef\bfi\bix\bx <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Interrogate the prefix database
See also SHOW/DXCC
- 1\b12\b2.\b.9\b94\b4.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\bla\bat\bt>\b> <\b<l\blo\bon\bng\bg>\b>
+ 1\b12\b2.\b.9\b96\b6.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\bla\bat\bt>\b> <\b<l\blo\bon\bng\bg>\b>
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\bla\bat\bt>\b> <\b<l\blo\bon\bng\bg>\b> Convert lat/long to a QRA Grid locator
from yourself, the second example will calculate the distance and
bearing from the first locator to the second. You can use 4 or 6
character locators.
-
It is also possible to convert a latitude and longitude to a locator
by using this command with a latitude and longitude as an argument,
for example:-
- 1\b12\b2.\b.9\b95\b5.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> [\b[<\b<l\blo\boc\bca\bat\bto\bor\br>\b>]\b]
+ 1\b12\b2.\b.9\b97\b7.\b. s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> [\b[<\b<l\blo\boc\bca\bat\bto\bor\br>\b>]\b]
s\bsh\bho\bow\bw/\b/q\bqr\bra\ba <\b<l\blo\boc\bca\bat\bto\bor\br>\b> [\b[<\b<l\blo\boc\bca\bat\bto\bor\br>\b>]\b] Show distance between QRA Grid locators
- 1\b12\b2.\b.9\b96\b6.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
+ 1\b12\b2.\b.9\b98\b8.\b. s\bsh\bho\bow\bw/\b/q\bqr\brz\bz <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
s\bsh\bho\bow\bw/\b/q\bqr\brz\bz <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show any callbook details on a callsign
See also SHOW/WM7D for an alternative.
- 1\b12\b2.\b.9\b97\b7.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> .\b..\b..\b.
+ 1\b12\b2.\b.9\b99\b9.\b. s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> .\b..\b..\b.
s\bsh\bho\bow\bw/\b/r\bro\bou\but\bte\be <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> .\b..\b..\b. Show the route to the callsign
- 1\b12\b2.\b.9\b98\b8.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be <\b<n\bna\bam\bme\be>\b> [\b[<\b<h\bho\bou\bur\brs\bs>\b> <\b<i\bin\bnt\bte\ber\brv\bva\bal\bl>\b>]\b]
+ 1\b12\b2.\b.1\b10\b00\b0.\b. s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be <\b<n\bna\bam\bme\be>\b> [\b[<\b<h\bho\bou\bur\brs\bs>\b> <\b<i\bin\bnt\bte\ber\brv\bva\bal\bl>\b>]\b]
s\bsh\bho\bow\bw/\b/s\bsa\bat\bte\bel\bll\bli\bit\bte\be <\b<n\bna\bam\bme\be>\b> [\b[<\b<h\bho\bou\bur\brs\bs>\b> <\b<i\bin\bnt\bte\ber\brv\bva\bal\bl>\b>]\b] Show tracking data
- 1\b12\b2.\b.9\b99\b9.\b. s\bsh\bho\bow\bw/\b/s\bst\bta\bat\bti\bio\bon\bn [\b[<\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> .\b..\b.]\b]
+ 1\b12\b2.\b.1\b10\b01\b1.\b. s\bsh\bho\bow\bw/\b/s\bst\bta\bat\bti\bio\bon\bn [\b[<\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> .\b..\b.]\b]
s\bsh\bho\bow\bw/\b/s\bst\bta\bat\bti\bio\bon\bn [\b[<\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> .\b..\b.]\b] Show information about a callsign
If no callsign is given then show the information for yourself.
- 1
\b12
\b2.
\b.1
\b10
\b0
0\b0.
\b. s
\bsh
\bho
\bow
\bw/
\b/s
\bsu
\bun
\bn [
\b[n
\bnd
\bda
\bay
\bys
\bs]
\b] [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
+ 1
\b12
\b2.
\b.1
\b10
\b0
2\b2.
\b. s
\bsh
\bho
\bow
\bw/
\b/s
\bsu
\bun
\bn [
\b[n
\bnd
\bda
\bay
\bys
\bs]
\b] [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
s
\bsh
\bho
\bow
\bw/
\b/s
\bsu
\bun
\bn [
\b[n
\bnd
\bda
\bay
\bys
\bs]
\b] [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show sun rise and set times
or in three days time:-
-
-
SH/SUN +3 W9
Please note that the rise and set times are given as the UT times of
rise and set on the requested UT day.
- 1
\b12
\b2.
\b.1
\b10
\b01
\b1.
\b. s
\bsh
\bho
\bow
\bw/
\b/t
\bti
\bim
\bme
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
+
+ 1
\b12
\b2.
\b.1
\b10
\b03
\b3.
\b. s
\bsh
\bho
\bow
\bw/
\b/t
\bti
\bim
\bme
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b]
s
\bsh
\bho
\bow
\bw/
\b/t
\bti
\bim
\bme
\be [
\b[<
\b<p
\bpr
\bre
\bef
\bfi
\bix
\bx>
\b>|
\b|<
\b<c
\bca
\bal
\bll
\bls
\bsi
\big
\bgn
\bn>
\b>]
\b] Show the local time
prefixes then it will show UTC and UTC + the local offset (not
including DST) at the prefixes or callsigns that you specify.
- 1\b12\b2.\b.1\b10\b02\b2.\b. s\bsh\bho\bow\bw/\b/u\bus\bsd\bdb\bb [\b[c\bca\bal\bll\bl .\b..\b.]\b]
+ 1\b12\b2.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/u\bus\bsd\bdb\bb [\b[c\bca\bal\bll\bl .\b..\b.]\b]
s\bsh\bho\bow\bw/\b/u\bus\bsd\bdb\bb [\b[c\bca\bal\bll\bl .\b..\b.]\b] Show information held on the FCC Call database
- 1\b12\b2.\b.1\b10\b03\b3.\b. s\bsh\bho\bow\bw/\b/v\bvh\bhf\bfs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b]
+ 1\b12\b2.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/v\bvh\bhf\bfs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b]
s\bsh\bho\bow\bw/\b/v\bvh\bhf\bfs\bst\bta\bat\bts\bs [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] Show the VHF DX Statistics
Show the VHF DX spots breakdown by band for the last <days> no of days
(default is 31), starting from a date (default: today).
- 1\b12\b2.\b.1\b10\b04\b4.\b. s\bsh\bho\bow\bw/\b/v\bvh\bhf\bft\bta\bab\bbl\ble\be [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] [\b[p\bpr\bre\bef\bfi\bix\bx .\b..\b..\b.]\b]
+ 1\b12\b2.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/v\bvh\bhf\bft\bta\bab\bbl\ble\be [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] [\b[p\bpr\bre\bef\bfi\bix\bx .\b..\b..\b.]\b]
s\bsh\bho\bow\bw/\b/v\bvh\bhf\bft\bta\bab\bbl\ble\be [\b[d\bda\bay\bys\bs]\b] [\b[d\bda\bat\bte\be]\b] [\b[p\bpr\bre\bef\bfi\bix\bx .\b..\b..\b.]\b] Show the VHF DX Spotter Table
sh/vhftable 20 pa
+
+
If you want to start at a different day, simply add the date in some
recognizable form:-
- 1\b12\b2.\b.1\b10\b05\b5.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by
+ 1\b12\b2.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by Show last 10 WCY broadcasts
- 1\b12\b2.\b.1\b10\b06\b6.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by <\b<n\bn>\b>
+ 1\b12\b2.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/w\bwc\bcy\by <\b<n\bn>\b>
s\bsh\bho\bow\bw/\b/w\bwc\bcy\by <\b<n\bn>\b> Show last <n> WCY broadcasts
system
- 1\b12\b2.\b.1\b10\b07\b7.\b. s\bsh\bho\bow\bw/\b/w\bwm\bm7\b7d\bd <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
+ 1\b12\b2.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/w\bwm\bm7\b7d\bd <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b>
s\bsh\bho\bow\bw/\b/w\bwm\bm7\b7d\bd <\b<c\bca\bal\bll\bls\bsi\big\bgn\bn>\b> Show callbook details on a US callsigns
See also SHOW/QRZ.
- 1\b12\b2.\b.1\b10\b08\b8.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv
+ 1\b12\b2.\b.1\b11\b10\b0.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv Show last 10 WWV broadcasts
- 1\b12\b2.\b.1\b10\b09\b9.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv <\b<n\bn>\b>
+ 1\b12\b2.\b.1\b11\b11\b1.\b. s\bsh\bho\bow\bw/\b/w\bww\bwv\bv <\b<n\bn>\b>
s\bsh\bho\bow\bw/\b/w\bww\bwv\bv <\b<n\bn>\b> Show last <n> WWV broadcasts
Display the most recent WWV information that has been received by the
system
- 1\b12\b2.\b.1\b11\b10\b0.\b. s\bsy\bys\bso\bop\bp
+
+ 1\b12\b2.\b.1\b11\b12\b2.\b. s\bsy\bys\bso\bop\bp
s\bsy\bys\bso\bop\bp Regain your privileges if you login remotely
numbers but nothing will happen when you input a string. Any match is
case sensitive.
- 1\b12\b2.\b.1\b11\b11\b1.\b. t\bta\bal\blk\bk <\b<c\bca\bal\bll\bl>\b> >\b> <\b<n\bno\bod\bde\be>\b> [\b[<\b<t\bte\bex\bxt\bt>\b>]\b]
+ 1\b12\b2.\b.1\b11\b13\b3.\b. t\bta\bal\blk\bk <\b<c\bca\bal\bll\bl>\b> >\b> <\b<n\bno\bod\bde\be>\b> [\b[<\b<t\bte\bex\bxt\bt>\b>]\b]
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bl>\b> >\b> <\b<n\bno\bod\bde\be>\b> [\b[<\b<t\bte\bex\bxt\bt>\b>]\b] Send a text message to another station
via a node
All the usual announcements, spots and so on will still come out on
your terminal.
+
If you want to do something (such as send a spot) you preceed the
normal command with a '/' character, eg:-
will send the hftable as you have it to all the people you are
currently talking to.
- 1\b12\b2.\b.1\b11\b12\b2.\b. t\bta\bal\blk\bk <\b<c\bca\bal\bll\bl>\b> [\b[<\b<t\bte\bex\bxt\bt>\b>]\b]
+ 1\b12\b2.\b.1\b11\b14\b4.\b. t\bta\bal\blk\bk <\b<c\bca\bal\bll\bl>\b> [\b[<\b<t\bte\bex\bxt\bt>\b>]\b]
t\bta\bal\blk\bk <\b<c\bca\bal\bll\bl>\b> [\b[<\b<t\bte\bex\bxt\bt>\b>]\b] Send a text message to another station
- 1\b12\b2.\b.1\b11\b13\b3.\b. t\bty\byp\bpe\be <\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b>/\b/<\b<n\bna\bam\bme\be>\b>
+ 1\b12\b2.\b.1\b11\b15\b5.\b. t\bty\byp\bpe\be <\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b>/\b/<\b<n\bna\bam\bme\be>\b>
t\bty\byp\bpe\be <\b<f\bfi\bil\ble\bea\bar\bre\bea\ba>\b>/\b/<\b<n\bna\bam\bme\be>\b> Look at the contents of a file in one of the
fileareas
enter:-
- TYPE bulletins/arld051
+ TYPE bulletins/arld051
See also SHOW/FILES to see what fileareas are available and a list of
content.
- 1\b12\b2.\b.1\b11\b14\b4.\b. u\bun\bns\bse\bet\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be
+ 1\b12\b2.\b.1\b11\b16\b6.\b. u\bun\bns\bse\bet\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be
u\bun\bns\bse\bet\bt/\b/a\ban\bnn\bno\bou\bun\bnc\bce\be Stop announce messages coming out on your terminal
- 1\b12\b2.\b.1\b11\b15\b5.\b. u\bun\bns\bse\bet\bt/\b/a\ban\bnn\bnt\bta\bal\blk\bk
+ 1\b12\b2.\b.1\b11\b17\b7.\b. u\bun\bns\bse\bet\bt/\b/a\ban\bnn\bnt\bta\bal\blk\bk
u\bun\bns\bse\bet\bt/\b/a\ban\bnn\bnt\bta\bal\blk\bk Stop talk like announce messages on your terminal
allows you to see them again. This is the default.
- 1\b12\b2.\b.1\b11\b16\b6.\b. u\bun\bns\bse\bet\bt/\b/b\bbe\bee\bep\bp
+ 1\b12\b2.\b.1\b11\b18\b8.\b. u\bun\bns\bse\bet\bt/\b/b\bbe\bee\bep\bp
u\bun\bns\bse\bet\bt/\b/b\bbe\bee\bep\bp Stop beeps for DX and other messages on your terminal
- 1\b12\b2.\b.1\b11\b17\b7.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bx
+ 1\b12\b2.\b.1\b11\b19\b9.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bx
u\bun\bns\bse\bet\bt/\b/d\bdx\bx Stop DX messages coming out on your terminal
- 1\b12\b2.\b.1\b11\b18\b8.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd
+ 1\b12\b2.\b.1\b12\b20\b0.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bxc\bcq\bq
+
+ u\bun\bns\bse\bet\bt/\b/d\bdx\bxc\bcq\bq Stop CQ Zones on the end of DX announcements
+
+
+ Display both the Spotter's and the Spotted's CQ Zone on the end of a
+ DX announcement (there is just enough room). Some user programs cannot
+ cope with this. The Spotter's CQ is on the RHS of the time, the
+ Spotted's CQ is on the LHS.
+
+ Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE
+
+ Do a STAT/USER to see which flags you have set if you are confused.
+
+ 1\b12\b2.\b.1\b12\b21\b1.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd
u\bun\bns\bse\bet\bt/\b/d\bdx\bxg\bgr\bri\bid\bd Stop QRA Grid Squares on the end of DX announcements
cope with this. You can use this command to reset (or set) this
feature.
- 1\b12\b2.\b.1\b11\b19\b9.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bxs\bst\bta\bat\bte\be
+ Conflicts with: SET/DXCQ, SET/DXITU
- u\bun\bns\bse\bet\bt/\b/d\bdx\bxs\bst\bta\bat\bte\be Stop US State info on the end of DX announcements
+ Do a STAT/USER to see which flags you have set if you are confused.
+ 1\b12\b2.\b.1\b12\b22\b2.\b. u\bun\bns\bse\bet\bt/\b/d\bdx\bxi\bit\btu\bu
- If the spotter's or spotted's US State is known it is output on the
- end of a DX announcement (there is just enough room).
+ u\bun\bns\bse\bet\bt/\b/d\bdx\bxi\bit\btu\bu Stop ITU Zones on the end of DX announcements
- A spotter's state will appear on the RHS of the time (like SET/DXGRID)
- and the spotted's State will appear on the LHS of the time field. Any
- information found will override any locator information from
- SET/DXGRID.
- Some user programs cannot cope with this. You can use this command to
- reset (or set) this feature.
- 1\b12\b2.\b.1\b12\b20\b0.\b. u\bun\bns\bse\bet\bt/\b/e\bec\bch\bho\bo
+ Display both the Spotter's and the Spotted's ITU Zone on the end of a
+ DX announcement (there is just enough room). Some user programs cannot
+ cope with this. The Spotter's ITU is on the RHS of the time, the
+ Spotted's ITU is on the LHS.
+
+ Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE
+
+ Do a STAT/USER to see which flags you have set if you are confused.
+
+ 1\b12\b2.\b.1\b12\b23\b3.\b. u\bun\bns\bse\bet\bt/\b/e\bec\bch\bho\bo
u\bun\bns\bse\bet\bt/\b/e\bec\bch\bho\bo Stop the cluster echoing your input
YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
- 1\b12\b2.\b.1\b12\b21\b1.\b. u\bun\bns\bse\bet\bt/\b/e\bem\bma\bai\bil\bl
+ 1\b12\b2.\b.1\b12\b24\b4.\b. u\bun\bns\bse\bet\bt/\b/e\bem\bma\bai\bil\bl
u\bun\bns\bse\bet\bt/\b/e\bem\bma\bai\bil\bl Stop personal msgs being forwarded by email
You can disable forwarding by:-
-
-
UNSET/EMAIL
- 1\b12\b2.\b.1\b12\b22\b2.\b. u\bun\bns\bse\bet\bt/\b/h\bhe\ber\bre\be
+ 1\b12\b2.\b.1\b12\b25\b5.\b. u\bun\bns\bse\bet\bt/\b/h\bhe\ber\bre\be
u\bun\bns\bse\bet\bt/\b/h\bhe\ber\bre\be Tell the system you are absent from your terminal
- 1\b12\b2.\b.1\b12\b23\b3.\b. u\bun\bns\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo
+ 1\b12\b2.\b.1\b12\b26\b6.\b. u\bun\bns\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo
u\bun\bns\bse\bet\bt/\b/l\blo\bog\bgi\bin\bni\bin\bnf\bfo\bo Inform when a station logs out locally
- 1\b12\b2.\b.1\b12\b24\b4.\b. u\bun\bns\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be
+ 1\b12\b2.\b.1\b12\b27\b7.\b. u\bun\bns\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be
u\bun\bns\bse\bet\bt/\b/p\bpr\bri\biv\bvi\bil\ble\beg\bge\be Remove any privilege for this session
either logout and login again (if you are on a console) or use the
SYSOP command.
-
- 1\b12\b2.\b.1\b12\b25\b5.\b. u\bun\bns\bse\bet\bt/\b/p\bpr\bro\bom\bmp\bpt\bt
+ 1\b12\b2.\b.1\b12\b28\b8.\b. u\bun\bns\bse\bet\bt/\b/p\bpr\bro\bom\bmp\bpt\bt
u\bun\bns\bse\bet\bt/\b/p\bpr\bro\bom\bmp\bpt\bt Set your prompt back to default
UNSET/PROMPT will undo the SET/PROMPT command and set you prompt back
to normal.
- 1\b12\b2.\b.1\b12\b26\b6.\b. u\bun\bns\bse\bet\bt/\b/t\bta\bal\blk\bk
+ 1\b12\b2.\b.1\b12\b29\b9.\b. u\bun\bns\bse\bet\bt/\b/t\bta\bal\blk\bk
u\bun\bns\bse\bet\bt/\b/t\bta\bal\blk\bk Stop TALK messages coming out on your terminal
- 1\b12\b2.\b.1\b12\b27\b7.\b. u\bun\bns\bse\bet\bt/\b/w\bwc\bcy\by
+ 1\b12\b2.\b.1\b13\b30\b0.\b. u\bun\bns\bse\bet\bt/\b/u\bus\bss\bst\bta\bat\bte\be
+
+ u\bun\bns\bse\bet\bt/\b/u\bus\bss\bst\bta\bat\bte\be Stop US State info on the end of DX announcements
+
+
+ If the spotter's or spotted's US State is known it is output on the
+ end of a DX announcement (there is just enough room).
+
+ A spotter's state will appear on the RHS of the time (like SET/DXGRID)
+ and the spotted's State will appear on the LHS of the time field. Any
+ information found will override any locator information from
+ SET/DXGRID.
+ Some user programs cannot cope with this. You can use this command to
+ reset (or set) this feature.
+
+ Conflicts with: SET/DXCQ, SET/DXITU
+
+ Do a STAT/USER to see which flags you have set if you are confused.
+
+ 1\b12\b2.\b.1\b13\b31\b1.\b. u\bun\bns\bse\bet\bt/\b/w\bwc\bcy\by
u\bun\bns\bse\bet\bt/\b/w\bwc\bcy\by Stop WCY messages coming out on your terminal
- 1\b12\b2.\b.1\b12\b28\b8.\b. u\bun\bns\bse\bet\bt/\b/w\bww\bwv\bv
+ 1\b12\b2.\b.1\b13\b32\b2.\b. u\bun\bns\bse\bet\bt/\b/w\bww\bwv\bv
u\bun\bns\bse\bet\bt/\b/w\bww\bwv\bv Stop WWV messages coming out on your terminal
- 1\b12\b2.\b.1\b12\b29\b9.\b. u\bun\bns\bse\bet\bt/\b/w\bwx\bx
+ 1\b12\b2.\b.1\b13\b33\b3.\b. u\bun\bns\bse\bet\bt/\b/w\bwx\bx
u\bun\bns\bse\bet\bt/\b/w\bwx\bx Stop WX messages coming out on your terminal
- 1\b12\b2.\b.1\b13\b30\b0.\b. w\bwh\bho\bo
+ 1\b12\b2.\b.1\b13\b34\b4.\b. w\bwh\bho\bo
w\bwh\bho\bo Show who is physically connected
This is a quick listing that shows which callsigns are connected and
what sort of connection they have
- 1\b12\b2.\b.1\b13\b31\b1.\b. w\bwx\bx <\b<t\bte\bex\bxt\bt>\b>
+ 1\b12\b2.\b.1\b13\b35\b5.\b. w\bwx\bx <\b<t\bte\bex\bxt\bt>\b>
w\bwx\bx <\b<t\bte\bex\bxt\bt>\b> Send a weather message to local users
- 1\b12\b2.\b.1\b13\b32\b2.\b. w\bwx\bx f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b>
+ 1\b12\b2.\b.1\b13\b36\b6.\b. w\bwx\bx f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b>
w\bwx\bx f\bfu\bul\bll\bl <\b<t\bte\bex\bxt\bt>\b> Send a weather message to all cluster users
projects / spider.git / commitdiff