3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 annts => 'AnnTalk flag set on $_[0]',
18 anntu => 'AnnTalk flag unset on $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxs => 'DX Spots flag set on $_[0]',
56 dxu => 'DX Spots flag unset on $_[0]',
57 e1 => 'Invalid command',
59 e3 => '$_[0]: $_[1] not found',
60 e4 => 'Need at least a prefix or callsign',
62 e6 => '*** No station specified ***',
63 e7 => 'callsign $_[0] not visible on the cluster',
64 e8 => 'Need a callsign and some text',
65 e9 => 'Need at least some text',
66 e10 => '$_[0] not connected locally',
67 e11 => 'Can\'t use $main:mycall as target',
68 e12 => 'Need a node callsign',
69 e13 => '$_[0] is not a node',
70 e14 => 'First argument must be numeric and > 0',
71 e15 => 'invalid qualifier \"$_[0]\"',
72 e16 => 'File \"$_[0]\" exists',
73 e17 => 'Please don\'t use the words: @_ on here',
74 e18 => 'Cannot connect to $_[0] ($!)',
75 e19 => 'Invalid character in line',
76 e20 => 'token $_[0] not recognised',
77 e21 => '$_[0] not numeric',
78 e22 => '$_[0] not a callsign',
79 e23 => '$_[0] not a range (eg 0/30000)',
80 e24 => 'Sorry, Internet access is not enabled',
81 e25 => 'Sorry the value must be between $_[0] and $_[1]',
82 e26 => 'Too many concurrent errors, you are being disconnected',
83 e27 => '$_[0] not a numeric or a callsign prefix',
84 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
85 e29 => 'Need a password',
87 echoon => 'Echoing enabled',
88 echooff => 'Echoing disabled',
89 echow => '*Echoing is currently disabled, set/echo to enable',
90 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
91 emaila => 'Your E-Mail Address is now \"$_[0]\"',
92 email => 'E-mail address set to: $_[0]',
93 export1 => 'usage: export <msgno> <filename>',
94 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
95 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
96 filter1 => 'Filter $_[0] updated for $_[1]',
97 filter2 => 'Unknown filter keyword $_[0]',
98 filter3 => 'No filters defined for $_[0]',
99 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
100 filter5 => 'need some filter commands...',
101 filter6 => '$_[0]$_[1] Filter for $[2] not found',
102 grids => 'DX Grid flag set on $_[0]',
103 gridu => 'DX Grid flag unset on $_[0]',
104 illcall => 'Sorry, $_[0] is an invalid callsign',
105 hasha => '$_[0] already exists in $_[1]',
106 hashb => '$_[0] added to $_[1]',
107 hashc => '$_[0] removed from $_[1]',
108 hashd => '$_[0] not in $_[1]',
109 hashe => '$_[0] set on $_[1]',
110 helpe1 => 'Help system unavailable, tell sysop',
111 helpe2 => 'No help available on $_[0]',
112 heres => 'Here set on $_[0]',
113 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
114 hereu => 'Here unset on $_[0]',
115 homebbs => 'Home BBS set to: $_[0]',
116 homenode => 'Home Node set to: $_[0]',
117 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
118 hnodee2 => 'Failed to set homenode on $_[0]',
119 hnode => 'Your Homenode is now \"$_[0]\"',
120 init1 => 'sent initialisation message to $_[0]',
121 iso => '$_[0] Isolated',
122 isou => '$_[0] UnIsolated',
123 isoc => '$_[0] created and Isolated',
124 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
125 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
126 isow => '$_[0] is isolated; unset/isolate $_[0] first',
127 l1 => 'Sorry $_[0], you are already logged on on another channel',
128 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
129 lang => 'Language is now $_[0]',
130 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
131 lange2 => 'failed to set language on $_[0]',
132 lh1 => '$main::data/hop_table.pl doesn\'t exist',
133 loce1 => 'Please enter your location,, set/location <latitude longitude>',
134 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
135 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
136 loc => 'Your Lat/Long is now \"$_[0]\"',
137 lockout => '$_[0] Locked out',
138 lockoutc => '$_[0] Created and Locked out',
139 lockoutun => '$_[0] Unlocked',
140 lockoutuse => 'usage: sh/lockout <call>|ALL',
141 loginu => 'User $_[0] has logged in',
142 logoutu => 'User $_[0] has logged out',
143 loginn => 'Node $_[0] has logged in',
144 logoutn => 'Node $_[0] has logged out',
145 m1 => 'Enter Subject (30 characters):',
146 m2 => 'Copy of msg $_[0] sent to $_[1]',
147 m3 => 'Sorry, $_[0] is an unacceptable TO address',
148 m4 => 'Sorry, can\'t access message $_[0]',
149 m5 => 'Sorry, I need a message number',
150 m6 => 'Reply to: $_[0]',
151 m7 => 'Subject : $_[0]',
152 m8 => 'Enter Message /EX to send or /ABORT to exit',
153 m9 => 'New mail has arrived for you',
154 m10 => 'Message Aborted',
155 m11 => 'Message no $_[0] saved and directed to $_[1]',
156 m12 => 'Message no $_[0] deleted',
157 m13 => 'Message no $_[0] missing',
158 m14 => 'Message no $_[0] marked as sent to $_[1]',
159 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
160 m16 => 'Need a Message number',
161 m17 => 'Sorry, cannot send messages in $_[0] mode',
162 msg1 => 'Bulletin Messages Queued',
163 msg2 => 'Private Messages Queued',
164 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
165 msgu => 'usage: msg <cmd> <msgno> data...',
166 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
167 moon => 'Location dd/mm/yyyy Rise Set',
168 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
169 mond => 'Monitoring Disabled',
170 mone => 'Monitoring Enabled',
171 namee1 => 'Please enter your name, set/name <your name>',
172 namee2 => 'Can\'t find user $_[0]!',
173 name => 'Your name is now \"$_[0]\"',
174 nodea => '$_[0] set as AK1A style Node',
175 nodeac => '$_[0] created as AK1A style Node',
176 nodeb => '$_[0] set as BBS',
177 nodebc => '$_[0] created as BBS',
178 nodec => '$_[0] set as CLX style Node',
179 nodecc => '$_[0] created as CLX style Node',
180 noder => '$_[0] set as AR-Cluster style Node',
181 noderc => '$_[0] created as AR-Cluster style Node',
182 nodes => '$_[0] set as DXSpider style Node',
183 nodesc => '$_[0] created as DXSpider style Node',
184 nodex => '$_[0] set as DXNET style Node',
185 nodexc => '$_[0] created as DXNET style Node',
186 nodeu => '$_[0] set back as a User',
187 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
188 notdone => 'NOT Done',
189 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
190 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
191 ok => 'Operation successful',
192 outconn => 'Outstanding connect to $_[0]',
193 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
194 pagelth => 'Page Length is now $_[0]',
195 passerr => 'Please use: SET/PASS <password> <callsign>',
196 password => 'Password set or changed for $_[0]',
197 passwordu => 'Password removed for $_[0]',
198 pingo => 'Ping Started to $_[0]',
199 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
200 pinge1 => 'Cannot ping yourself!',
201 pingint => 'Ping interval on $_[0] set to $_[1] secs',
202 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
203 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
204 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
205 priv => 'Privilege level changed on $_[0]',
206 prx => '$main::mycall >',
207 pw0 => 'Enter old password: ',
208 pw1 => 'Enter new password: ',
209 pw2 => 'Re-enter new password: ',
210 pw3 => 'Password changed',
211 pw4 => 'Passwords differ, password NOT changed',
212 qll => 'Please enter your location with set/location or set/qra',
213 qthe1 => 'Please enter your QTH, set/qth <your qth>',
214 qth => 'Your QTH is now \"$_[0]\"',
215 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
216 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
217 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
218 qra => 'Your QRA Locator is now \"$_[0]\"',
219 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
220 read1 => 'Sorry, no new messages for you',
221 read2 => 'Msg $_[0] not found',
222 read3 => 'Msg $_[0] not available',
223 rec => '$_[0] records',
224 reg => '$_[0] registered',
225 regc => '$_[0] created and registered',
226 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
227 regun => '$_[0] unregistered',
228 route => '$_[0] on $_[1] via $_[2]',
229 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
230 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
231 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
232 sat4 => 'Satellites available/Age of Keps (days):-',
233 sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
234 satnf => 'Satellite $_[0] unknown',
236 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
237 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
238 sethop3 => 'No hops set for $_[0]',
239 shutting => '$main::mycall shutting down...',
240 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
241 snode1 => 'Node Call Sort Version',
242 snode2 => '$_[0] $_[1] $_[2]',
243 snode3 => '$_[0] Unknown Call',
244 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
246 spf1 => 'spoof: creating new user $_[0]',
247 stathf => 'HF DX Spot Stats, last 31 days',
248 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
249 statvhf => 'VHF+ DX Spot Stats, last 31 days',
250 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
251 statdx => 'Total DX Spots last 31 days',
252 sun => 'Location dd/mm/yyyy Rise Set',
253 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
254 suser1 => 'usage: callsign user_field_name value',
255 suser2 => 'User $_[0] not found',
256 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
257 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
258 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
259 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
260 time3 => '$_[0] $_[1]',
261 talks => 'Talk flag set on $_[0]',
262 talku => 'Talk flag unset on $_[0]',
263 talkend => 'Finished talking to you',
264 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
265 talknh => 'Sorry $_[0] is not online at the moment',
266 talkprompt => 'Talk ($_[0])>',
267 talkstart => 'Starting talking to you',
268 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
269 unsethop2 => 'hops unset on $_[1] for $_[0]',
270 usernf => '*** User record for $_[0] not found ***',
271 wcy1 => '$_[0] is missing or out of range',
272 wcy2 => 'Duplicate WCY',
273 wwv1 => '$_[0] is missing or out of range',
274 wwv2 => 'Duplicate WWV',
275 wwvs => 'WWV flag set on $_[0]',
276 wwvu => 'WWV flag unset on $_[0]',
277 wxs => 'WX flag set on $_[0]',
278 wxu => 'WX flag unset on $_[0]',
281 addr => 'Addres gezet op: $_[0]',
282 already => '$_[0] reeds geconnect',
283 anns => 'Announce berichten AAN gezet voor $_[0]',
284 annu => 'Announce berichten UIT gezet voor $_[0]',
285 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
286 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
287 beepoff => 'De beep staat nu UIT',
288 beepon => 'De beep staat nu AAN',
289 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
290 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
291 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
292 confail => 'Verbinding met $_[0] mislukt ($_[1])',
293 constart => 'Verbinding met $_[0] gestart',
294 disc1 => 'Gedisconnect door $_[0]',
295 disc2 => '$_[0] gedisconnect',
296 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
297 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
298 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
299 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
300 e1 => 'Ongeldige opdracht',
302 e3 => '$_[0]: $_[1] niet gevonden',
303 e4 => 'Minimaal een prefix of een call nodig',
304 e5 => 'Niet toegestaan',
305 e6 => '*** Geen station gespecifiseerd ***',
306 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
307 e8 => 'Ik heb een call en tekst nodig',
308 e9 => 'Ik heb wel tekst nodig voor een announce!',
309 e10 => '$_[0] is niet lokaal verbonden',
310 e12 => 'Ik heb een node call nodig',
311 e13 => '$_[0] is geen node',
312 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
313 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
314 email => 'E-mail addres gezet op: $_[0]',
315 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
316 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
317 heres => 'Aanwezigheid AAN gezet voor $_[0]',
318 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
319 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
320 homebbs => 'Uw Home mailbox is nu $_[0]',
321 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
322 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
323 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
324 iso => '$_[0] is geisoleerd (Isolated)',
325 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
326 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
327 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
328 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
329 lh1 => '$main::data/hop_table.pl bestaat niet',
330 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
331 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
332 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
333 lockout => '$_[0] heeft geen toegang meer (Locked out)',
334 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
335 m2 => '$_[0] Informatie: $_[1]',
336 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
337 msgnew => 'Er is nieuwe post gearriveerd voor u',
338 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
339 namee2 => 'Gebruiker $_[0] niet te vinden!',
340 name => 'Uw naam is gezet op \"$_[0]\"',
341 node => '$_[0] gezet als een AK1A stijl DX-cluster',
342 nodeu => '$_[0] teruggezet naar gebruiker status',
343 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
344 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
345 ok => 'Opdracht succesvol uitgevoerd',
346 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
347 pagelth => 'Paginalengte gezet op ($_[0]) regels',
348 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
349 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
350 pingo => 'Ping gestart naar $_[0]',
351 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
352 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
353 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
354 priv => 'Privilege level gewijzigd op $_[0]',
355 prx => '$main::mycall >',
356 qll => 'Geef uw locator met set/location of set/qra',
357 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
358 qth => 'Uw QTH is nu \"$_[0]\"',
359 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
360 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
361 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
362 qra => 'Uw QRA Locator is nu \"$_[0]\"',
363 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
364 read1 => 'Sorry, geen berichten voor u',
365 read2 => 'Bericht $_[0] niet gevonden',
366 read3 => 'Bericht $_[0] niet beschikbaar',
367 shutting => '$main::mycall gaat QRT...',
368 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
369 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
370 talks => 'Talk berichten AAN gezet voor $_[0]',
371 talku => 'Talk berichten UIT gezet voor $_[0]',
372 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
373 wwvs => 'WWV berichten AAN gezet voor $_[0]',
374 wwvu => 'WWV berichten UIT gezet voor $_[0]',
375 wxs => 'WX berichten AAN gezet voor $_[0]',
376 wxu => 'WX berichten UIT gezet voor $_[0]',
381 addr => 'Dirección es ahora: $_[0]',
382 already => '$_[0] ya esta conectado',
383 anns => 'Anuncios activados $_[0]',
384 annu => 'Anuncios desactivados $_[0]',
385 annts => 'AnnTalk activados $_[0]',
386 anntu => 'AnnTalk desactivados $_[0]',
387 badnode1 => '$_[0] es ahora un nodo indeseado',
388 badnode2 => '$_[0] es ahora un nodo normal',
389 badnode3 => 'Lista de nodos indeseados:-',
390 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
391 bbs => 'Tu BBS es ahora \"$_[0]\"',
392 beepoff => 'Beeps desactivados',
393 beepon => 'Beeps activados',
394 call1 => 'Callsign lookup via $_[0]:',
395 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
396 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
397 conscript => 'no hay ningún script que se llame \"$_[0]\" en $main::root/connect',
398 confail => 'conexión con $_[0] fallida ($_[1])',
399 constart => 'conexión con $_[0] ha comenzado',
400 deluser =>'El usuario $_[0] ha sido borrado',
401 db1 => 'Esta base de datos está en $_[0]',
402 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
403 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
404 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
405 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
406 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
407 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
408 db8 => 'Base de datos $_[0] creada localmente',
409 db9 => 'Base de datos $_[0] borrada',
410 db10 => '$_[0] registros importados para $_[1]',
411 db11 => 'Petición enviada a $_[0], por favor espera...',
412 dfreq1 => 'Frecuencia inválida $_[0] se necesita: ej 0/30000 o hf o hf/cw',
413 dir1 => 'No se encontró el mensage',
414 disc1 => 'Desconectado por $_[0]',
415 disc2 => '$_[0] desconectado',
416 disc3 => 'No Channel, but connection $_[0] disconnected',
417 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
419 dup => 'Lo siento, esto es un duplicado',
420 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
421 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
422 dx3 => 'El indicativo o la frecuencia es incorrecta',
423 dxs => 'DX Spots activado $_[0]',
424 dxu => 'DX Spots desactivado $_[0]',
425 e1 => 'Comando inválido',
426 e2 => 'Error: $_[0]',
427 e3 => '$_[0]: $_[1] no encontrado',
428 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
429 e5 => 'No permitido',
430 e6 => '*** No se ha especificado una estación ***',
431 e7 => 'indicativo $_[0] no visible en el cluster',
432 e8 => 'Se necesita un indicativo y algo de texto',
433 e9 => 'Se necesita al menos algo de texto',
434 e10 => '$_[0] no conectado en local',
435 e11 => 'Can\'t use $main:mycall as target',
436 e12 => 'Se necesita el indicativo del nodo',
437 e13 => '$_[0] no es un nodo',
438 e14 => 'El primer argumento debe de ser mumérico y > 0',
439 e15 => 'cualificador no válido \"$_[0]\"',
440 e16 => 'El fichero \"$_[0]\" ya existe',
441 e17 => 'Por favor no uses la palabra: @_ aqui',
442 e18 => 'No se puede conectar con $_[0] ($!)',
443 e19 => 'Caracter inválido en la linea',
444 e20 => 'señal $_[0] no reconocido',
445 e21 => '$_[0] no numérico',
446 e22 => '$_[0] no es un indicativo',
447 e23 => '$_[0] fuera de rango (ej: 0/30000)',
448 e24 => 'Lo siento, el acceso a internet no está habilitado',
449 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
450 e26 => 'Demasiados errores, serás desconectado',
451 e27 => '$_[0] no es un numero o un prefijo',
452 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
453 e29 => 'Necesitas password',
455 echoon => 'Habilitado eco',
456 echooff => 'Deshabilitado eco',
457 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
458 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
459 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
460 email => 'E-mail es ahora: $_[0]',
461 export1 => 'usa: export <msgno> <filename>',
462 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
463 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
464 filter1 => 'Filtro $_[0] actualizado para $_[1]',
465 filter2 => 'Necesito un valor para $_[0]',
466 filter3 => 'No hay filtros definidos para $_[0]',
467 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
468 filter5 => 'necesito algunos camandos para el filtro...',
469 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
470 grids => 'DX Grid está activado $_[0]',
471 gridu => 'DX Grid está desavtivado $_[0]',
472 illcall => 'Lo siento,$_[0] no es un indicativo válido',
473 hasha => '$_[0] ya existe en $_[1]',
474 hashb => '$_[0] añadido a $_[1]',
475 hashc => '$_[0] eliminado desde $_[1]',
476 hashd => '$_[0] no en $_[1]',
477 hashe => '$_[0] activado $_[1]',
478 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
479 helpe2 => 'No hay ayuda disponible en $_[0]',
480 heres => 'Estás presente $_[0]',
481 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
482 hereu => 'Estás ausente $_[0]',
483 homebbs => 'Tu BBS es ahora: $_[0]',
484 homenode => 'Tu Nodo habitual es ahora: $_[0]',
485 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
486 hnodee2 => 'Fallo al poner homenode en $_[0]',
487 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
488 init1 => 'enviando mensaje de inicialización a $_[0]',
489 iso => '$_[0] Aislado',
490 isou => '$_[0] en red',
491 isoc => '$_[0] creado y aislado',
492 isoari => 'Ya hay un input route filter para $_[0]; clear/route input $_[0] primero',
493 isoaro => 'Ya hay un output route filter para $_[0]; clear/route $_[0] primero',
494 isow => '$_[0] está aislado; unset/isolate $_[0] primero',
495 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
496 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
497 lang => 'El idioma es ahora $_[0]',
498 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
499 lange2 => 'fallo al poner idioma en $_[0]',
500 lh1 => '$main::data/hop_table.pl no existe',
501 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
502 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
503 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
504 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
505 lockout => '$_[0] Boloqueado',
506 lockoutc => '$_[0] Creado y bloqueado',
507 lockoutun => '$_[0] Desbloqueado',
508 lockoutuse => 'usa: sh/lockout <call>|ALL',
509 loginu => 'Usuario $_[0] conectado',
510 logoutu => 'Usuario $_[0] desconectado',
511 loginn => 'Nodo $_[0] conectado',
512 logoutn => 'Nodo $_[0] desconectado',
513 m1 => 'Introduce título (30 caracteres):',
514 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
515 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
516 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
517 m5 => 'Lo siento, se necesita un número de mensaje',
518 m6 => 'Reenviado a: $_[0]',
519 m7 => 'Título : $_[0]',
520 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
521 m9 => 'Hay correo nuevo para ti.Borralo una vez leido.',
522 m10 => 'mensaje interrumpido',
523 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
524 m12 => 'mensaje nr $_[0] borrado',
525 m13 => 'mensaje nr $_[0] no encontrado',
526 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
527 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
528 m16 => 'Necesito un número de mensaje',
529 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
530 msg1 => 'Bulletin Messages Queued',
531 msg2 => 'Private Messages Queued',
532 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
533 msgu => 'usa: msg <cmd> <msgno> data...',
534 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
535 moon => 'QTH dd/mm/yyyy Salida Puesta',
536 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
537 mond => 'Monitorado deshabilitado',
538 mone => 'Monitorado habilitado',
539 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
540 namee2 => 'No se encuentra el usuario $_[0]!',
541 name => 'Tu nombre es ahora \"$_[0]\"',
542 nodea => '$_[0] fijado como nodo AK1A ',
543 nodeac => '$_[0] creado como nodo AK1A ',
544 nodeb => '$_[0] fijado como BBS',
545 nodebc => '$_[0] creado como BBS',
546 nodec => '$_[0] fijado como nodo CLX ',
547 nodecc => '$_[0] creado como nodo CLX ',
548 noder => '$_[0] fijado como nodo AR-Cluster ',
549 noderc => '$_[0] creado como nodo AR-Cluster ',
550 nodes => '$_[0] fijado como nodo DXSpider ',
551 nodesc => '$_[0] creado como nodo DXSpider ',
552 nodex => '$_[0] fijado como nodo DXNET ',
553 nodexc => '$_[0] creado como nodo DXNET ',
554 nodeu => '$_[0] es ahora un usuario',
555 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
556 notdone => 'NO se pudo hacer',
557 nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde',
558 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
559 ok => 'Operación realizada',
560 outconn => 'Iniciando conexion con $_[0]',
561 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
562 pagelth => 'La longitud de las páginas es ahora $_[0]',
563 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
564 password => 'Password ajustado o cambiado para $_[0]',
565 pingo => 'Iniciado el ping a $_[0]',
566 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
567 pinge1 => 'No puedes enviarte un ping a ti mismo!',
568 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
569 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
570 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
571 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
572 priv => 'Nivel de privilegios en $_[0]',
573 prx => '$main::mycall >',
574 pw0 => 'Teclea el password antiguo: ',
575 pw1 => 'Teclea el password nuevo: ',
576 pw2 => 'Teclea otra vez el password nuevo: ',
577 pw3 => 'Password cambiado',
578 pw4 => 'Los passwords no coinciden, NO se han cambiado',
579 qll => 'Por favor introduce tu locator con set/location o set/qra',
580 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
581 qth => 'Tu QTH es ahora \"$_[0]\"',
582 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
583 qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS',
584 qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)',
585 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
586 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
587 read1 => 'Lo siento, no hay mensajes nuevos para ti',
588 read2 => 'Msg $_[0] no encontrado',
589 read3 => 'Msg $_[0] no disponible',
590 rec => '$_[0] registros',
591 reg => '$_[0] registrado',
592 regc => '$_[0] creado y registrado',
593 reginac => 'El registro no está activ (set/var \$main::regreq = 1 para activarlo)',
594 regun => '$_[0] borrado',
595 route => '$_[0] en $_[1] via $_[2]',
596 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
597 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
598 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
599 sat4 => 'Satélites disponibles:-',
600 satnf => 'Satélite $_[0] desconocido',
602 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
603 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
604 sethop3 => 'No hay hops definidos para $_[0]',
605 shutting => '$main::mycall shutting down...',
606 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
607 snode1 => 'Nodo Call Sort Version',
608 snode2 => '$_[0] $_[1] $_[2]',
609 snode3 => '$_[0] Indicativo desconocido',
610 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
611 sorry => 'Lo siento',
612 spf1 => 'spoof: creando nuevo usuario $_[0]',
613 stathf => 'Estadísticas de spots en HF de los últimos 31 dias',
614 stathft => 'Estadísticas de spots en HF de los últimos 31 dias para DXCC $_[0]',
615 statvhf => 'VHF+ DX Spot Stats, ultimos 31 dias',
616 statvhft => 'VHF+ DX Spot Stats, ultimos 31 dias para DXCC $_[0]',
617 statdx => 'Total DX Spots ultimos 31 dias',
618 sun => 'QTH dd/mm/yyyy Salida Puesta',
619 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
620 suser1 => 'usa: indicativo user_field_name value',
621 suser2 => 'Usuario $_[0] no encontrado',
622 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
623 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
624 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
625 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
626 time3 => '$_[0] $_[1]',
627 talks => 'Talk activado $_[0]',
628 talku => 'Talk desactivado $_[0]',
629 talkend => 'Finalizado modo talk contigo',
630 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
631 talknh => 'Lo siento $_[0] no est conectado en este momento',
632 talkprompt => 'Talk ($_[0])>',
633 talkstart => 'Iniciando modo talk contigo',
634 usernf => '*** User record for $_[0] no encontrado ***',
635 wwvs => 'WWV activado $_[0]',
636 wwvu => 'WWV desactivado $_[0]',
637 wxs => 'WX activado $_[0]',
638 wxu => 'WX desactivado $_[0]',
641 addr => 'Adresse gesetzt auf: $_[0]',
642 already => '$_[0] bereits connnected',
643 anns => 'Announce flag gesetzt auf $_[0]',
644 annu => 'Announce flag zurueckgesetzt auf $_[0]',
645 annts => 'AnnTalk flag gesetzt auf $_[0]',
646 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
647 badnode1 => '$_[0] ist nun ein bad node',
648 badnode2 => '$_[0] ist nun ein good node',
649 badnode3 => 'Liste der Bad Nodes:-',
650 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
651 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
652 beepoff => 'Beeps sind nun aus',
653 beepon => 'Beeps sind nun eingeschaltet',
654 call1 => 'Callsign lookup via $_[0]:',
655 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
656 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
657 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
658 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
659 constart => 'Verbindung zu $_[0] gestartet',
660 deluser => 'User $_[0] wurde geloescht',
661 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
662 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
663 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
664 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
665 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
666 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
667 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
668 db8 => 'Datenbank $_[0] lokal angelegt',
669 db9 => 'Datenbank $_[0] entfernt',
670 db10 => '$_[0] Datensaetze importiert in $_[1]',
671 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
672 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
673 dir1 => 'Keine Nachricht gefunden',
674 disc1 => 'Disconnected von $_[0]',
675 disc2 => 'Kanal $_[0] disconnected',
676 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
677 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
679 dup => 'Sorry, dies ist ein Duplikat',
680 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
681 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
682 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
683 dxs => 'DX Spots flag gesetzt auf $_[0]',
684 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
685 e1 => 'Ungueltiger Befehl',
686 e2 => 'Fehler: $_[0]',
687 e3 => '$_[0]: $_[1] nicht gefunden',
688 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
689 e5 => 'Nicht erlaubt',
690 e6 => '*** Keine Station angegeben ***',
691 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
692 e8 => 'Brauche ein Rufzeichen und etwas Text',
693 e9 => 'Brauche wenigstens etwas Text',
694 e10 => '$_[0] nicht lokal connected',
695 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
696 e12 => 'Brauche ein Node Rufzeichen',
697 e13 => '$_[0] ist kein Node',
698 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
699 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
700 e16 => 'Datei \"$_[0]\" existiert',
701 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
702 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
703 e19 => 'Ungueltiger Character in der Zeile',
704 e20 => 'Kuerzel $_[0] nicht erkannt',
705 e21 => '$_[0] nicht numerisch',
706 e22 => '$_[0] kein Rufzeichen',
707 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
708 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
710 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
711 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
712 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
713 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
714 e29 => 'Brauche eine Passwort',
715 echoon => 'Echo enabled',
716 echooff => 'Echo disabled',
717 echow => '*Echo ist im moment disabled, set/echo to enable',
718 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
719 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
720 email => 'E-mail Adresse gesetzt auf: $_[0]',
721 export1 => 'Gebrauch: export <msgno> <dateiname>',
722 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
723 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
724 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
725 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
726 filter3 => 'Keine Filter definiert fuer $_[0]',
727 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
728 filter5 => 'brauche ein paar Filter Kommandos...',
729 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
730 grids => 'DX Grid flag gesetzt auf $_[0]',
731 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
732 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
733 hasha => '$_[0] existiert bereits in $_[1]',
734 hashb => '$_[0] zugefuegt zu $_[1]',
735 hashc => '$_[0] entfernt von $_[1]',
736 hashd => '$_[0] nicht in $_[1]',
737 hashe => '$_[0] gesetzt auf $_[1]',
738 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
739 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
740 heres => 'Hier gesetzt auf $_[0]',
741 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
742 hereu => 'Here zurueckgesetzt auf $_[0]',
743 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
744 homenode => 'Heimat Node gesetzt auf: $_[0]',
745 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
746 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
747 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
748 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
749 iso => '$_[0] Isoliert',
750 isou => '$_[0] UnIsoliert',
751 isoc => '$_[0] erstellt und Isoliert',
752 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
753 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
754 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
755 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
756 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
757 lang => 'Sprache ist jetzt $_[0]',
758 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
759 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
760 lh1 => '$main::data/hop_table.pl existiert nicht',
761 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
762 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
763 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
764 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
765 lockout => '$_[0] ausgesperrt',
766 lockoutc => '$_[0] erstellt und ausgesperrt',
767 lockoutun => '$_[0] Aussperrung aufgehoben',
768 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
769 loginu => 'User $_[0] hat eingeloggt',
770 logoutu => 'User $_[0] hat ausgeloggt',
771 loginn => 'Node $_[0] hat eingeloggt',
772 logoutn => 'Node $_[0] hat ausgeloggt',
773 m1 => 'Subjekt eingeben (30 Zeichen):',
774 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
775 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
776 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
777 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
778 m6 => 'Reply to: $_[0]',
779 m7 => 'Subject : $_[0]',
780 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
781 m9 => 'Neue Nachricht(en) fuer Dich',
782 m10 => 'Nachricht abgebrochen',
783 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
784 m12 => 'Nachricht Nr. $_[0] geloescht',
785 m13 => 'Nachricht Nr. $_[0] fehlt',
786 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
787 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
788 m16 => 'Brauche eine Nachrichten Nummer',
789 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
790 msg1 => 'Bulletin Nachrichten aufgeschoben',
791 msg2 => 'Private Nachrichten aufgeschoben',
792 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
793 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
794 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
795 moon => 'Standort dd/mm/yyyy Rise Set',
796 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
797 mond => 'Ueberwachung Disabled',
798 mone => 'Ueberwachung Enabled',
799 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
800 namee2 => 'Kann User $_[0]nicht finden!',
801 name => 'Dein Name ist jetzt \"$_[0]\"',
802 nodea => '$_[0] gesetzt als AK1A style Node',
803 nodeac => '$_[0] erstellt als AK1A style Node',
804 nodeb => '$_[0] gesetzt als BBS',
805 nodebc => '$_[0] erstellt als BBS',
806 nodec => '$_[0] gesetzt als CLX style Node',
807 nodecc => '$_[0] erstellt als CLX style Node',
808 noder => '$_[0] gesetzt als AR-Cluster style Node',
809 noderc => '$_[0] erstellt als AR-Cluster style Node',
810 nodes => '$_[0] gesetzt als DXSpider style Node',
811 nodesc => '$_[0] erstellt als DXSpider style Node',
812 nodex => '$_[0] gesetzt als DXNET style Node',
813 nodexc => '$_[0] erstellt als DXNET style Node',
814 nodeu => '$_[0] zurueckgesetzt als ein User',
815 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
816 notdone => 'Nicht ausgefuehrt',
817 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
818 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
819 ok => 'Operation erfolgreich',
820 outconn => 'Outstanding connect to $_[0]',
821 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
822 pagelth => 'Seitenlaenge ist nun $_[0]',
823 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
824 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
825 passwordu => 'Passwort geloescht fuer $_[0]',
826 pingo => 'Ping Started to $_[0]',
827 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
828 pinge1 => 'Cannot ping yourself!',
829 pingint => 'Ping interval on $_[0] set to $_[1] secs',
830 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
831 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
832 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
833 priv => 'Priviligierten Level geaendert auf $_[0]',
834 prx => '$main::mycall >',
835 pw0 => 'Altes Passwort eingeben: ',
836 pw1 => 'Neues Passwort eingeben: ',
837 pw2 => 'Wiederhole neues Passwort: ',
838 pw3 => 'Passwort geaendert',
839 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
840 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
841 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
842 qth => 'Dein QTH ist nun \"$_[0]\"',
843 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
844 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
845 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
846 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
847 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
848 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
849 read2 => 'Msg $_[0] nicht gefunden',
850 read3 => 'Msg $_[0] nicht verfuegbar',
851 rec => '$_[0] records',
852 reg => '$_[0] registriert',
853 regc => '$_[0] erstellt und registriert',
854 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
855 regun => '$_[0] unregistriert',
856 route => '$_[0] auf $_[1] via $_[2]',
857 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
858 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
859 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
860 sat4 => 'Satelliten verfuegbar:-',
861 satnf => 'Satellit $_[0] unbekannt',
863 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
864 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
865 sethop3 => 'Keine hops gesetzt fuer $_[0]',
866 shutting => '$main::mycall shutting down...',
867 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
868 snode1 => 'Node Call Sort Version',
869 snode2 => '$_[0] $_[1] $_[2]',
870 snode3 => '$_[0] Unbekanntes Rufzeichen',
871 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
873 spf1 => 'spoof: erzeuge neuen User $_[0]',
874 stathf => 'HF DX Spot Stats, letzte 31 Tage',
875 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
876 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
877 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
878 statdx => 'Total DX Spots letzte 31 Tage',
879 sun => 'Location dd/mm/yyyy Rise Set',
880 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
881 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
882 suser2 => 'User $_[0] nicht gefunden',
883 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
884 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
885 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
886 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
887 time3 => '$_[0] $_[1]',
888 talks => 'Talk flag gesetzt auf $_[0]',
889 talku => 'Talk flag zurueckgesetzt auf $_[0]',
890 talkend => 'Beendet Talk zu Dir',
891 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
892 talknh => 'Sorry $_[0] ist im moment nicht online',
893 talkprompt => 'Talk ($_[0])>',
894 talkstart => 'Startet Talkmode zu Dir',
895 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
896 wwvs => 'WWV flag gesetzt auf $_[0]',
897 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
898 wxs => 'WX flag gesetzt auf $_[0]',
899 wxu => 'WX flag zurueckgesetzt auf $_[0]',
projects / spider.git / blob