3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announce flag set on $_[0]',
16 annu => 'Announce flag unset on $_[0]',
17 badnode1 => '$_[0] is now a bad node',
18 badnode2 => '$_[0] is now a good node',
19 badnode3 => 'List of Bad Nodes:-',
20 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
21 bbs => 'Your BBS Address is now \"$_[0]\"',
22 beepoff => 'Beeps are now off',
23 beepon => 'Beeps are now on',
24 call1 => 'Callsign lookup via $_[0]:',
25 conother => 'Sorry $_[0] you are connected to me on another port',
26 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[0])',
27 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
28 confail => 'connection to $_[0] failed ($_[1])',
29 constart => 'connection to $_[0] started',
30 disc1 => 'Disconnected by $_[0]',
31 disc2 => '$_[0] disconnected',
32 db1 => 'This database is hosted at $_[0]',
33 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
34 db3 => 'Sorry, database $_[0] doesn\'t exist here',
35 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
36 db5 => 'Accessing remote database on $_[0]...standby...',
37 db6 => 'Database $_[0] already exists, delete it first',
38 db7 => 'Database $_[0] created for remote node $_[1]',
39 db8 => 'Database $_[0] created locally',
40 db9 => 'Database $_[0] removed',
41 db10 => '$_[0] records imported into $_[1]',
42 db11 => 'Sending your request(s) to $_[0], please stand by...',
43 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dup => 'Sorry, this is a duplicate',
46 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
47 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
48 dxs => 'DX Spots flag set on $_[0]',
49 dxu => 'DX Spots flag unset on $_[0]',
50 e1 => 'Invalid command',
52 e3 => '$_[0]: $_[1] not found',
53 e4 => 'Need at least a prefix or callsign',
55 e6 => '*** No station specified ***',
56 e7 => 'callsign $_[0] not visible on the cluster',
57 e8 => 'Need a callsign and some text',
58 e9 => 'Need at least some text',
59 e10 => '$_[0] not connected locally',
60 e11 => 'Can\'t use $main:mycall as target',
61 e12 => 'Need a node callsign',
62 e13 => '$_[0] is not a node',
63 e14 => 'First argument must be numeric and > 0',
64 e15 => 'invalid qualifier \"$_[0]\"',
65 e16 => 'File \"$_[0]\" exists',
66 e17 => 'Please don\'t use the words: @_ on here',
67 e18 => 'Cannot connect to $_[0] ($!)',
68 e19 => 'Invalid character in line',
69 e20 => 'token $_[0] not recognised',
70 e21 => '$_[0] not numeric',
71 e22 => '$_[0] not a callsign',
72 e23 => '$_[0] not a range (eg 0/30000)',
73 e24 => 'Sorry, Internet access is not enabled',
74 e25 => 'Sorry the value must be between $_[0] and $_[1]',
76 echoon => 'Echoing enabled',
77 echooff => 'Echoing disabled',
78 echow => '*Echoing is currently disabled, set/echo to enable',
79 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
80 emaila => 'Your E-Mail Address is now \"$_[0]\"',
81 email => 'E-mail address set to: $_[0]',
82 export1 => 'usage: export <msgno> <filename>',
83 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
84 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
85 filter1 => 'Filter $_[0] updated for $_[1]',
86 filter2 => 'Need a value for $_[0]',
87 filter3 => 'No filters defined for $_[0]',
88 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
89 filter5 => 'need some filter commands...',
90 filter6 => '$_[0]$_[1] Filter for $[2] not found',
91 grids => 'DX Grid flag set on $_[0]',
92 gridu => 'DX Grid flag unset on $_[0]',
93 hasha => '$_[0] already exists in $_[1]',
94 hashb => '$_[0] added to $_[1]',
95 hashc => '$_[0] removed from $_[1]',
96 hashd => '$_[0] not in $_[1]',
97 hashe => '$_[0] set on $_[1]',
98 helpe1 => 'Help system unavailable, tell sysop',
99 helpe2 => 'No help available on $_[0]',
100 heres => 'Here set on $_[0]',
101 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
102 hereu => 'Here unset on $_[0]',
103 homebbs => 'Home BBS set to: $_[0]',
104 homenode => 'Home Node set to: $_[0]',
105 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
106 hnodee2 => 'Failed to set homenode on $_[0]',
107 hnode => 'Your Homenode is now \"$_[0]\"',
108 init1 => 'sent initialisation message to $_[0]',
109 iso => '$_[0] Isolated',
110 isou => '$_[0] UnIsolated',
111 isoc => '$_[0] created and Isolated',
112 l1 => 'Sorry $_[0], you are already logged on on another channel',
113 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
114 lang => 'Language is now $_[0]',
115 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
116 lange2 => 'failed to set language on $_[0]',
117 lh1 => '$main::data/hop_table.pl doesn\'t exist',
118 loce1 => 'Please enter your location,, set/location <latitude longitude>',
119 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
120 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
121 loc => 'Your Lat/Long is now \"$_[0]\"',
122 lockout => '$_[0] Locked out',
123 lockoutc => '$_[0] Created and Locked out',
124 lockoutun => '$_[0] Unlocked',
125 loginu => 'User $_[0] has logged in',
126 logoutu => 'User $_[0] has logged out',
127 loginn => 'Node $_[0] has logged in',
128 logoutn => 'Node $_[0] has logged out',
129 m1 => 'Enter Subject (30 characters):',
130 m2 => 'Copy of msg $_[0] sent to $_[1]',
131 m3 => 'Sorry, $_[0] is an unacceptable TO address',
132 m4 => 'Sorry, can\'t access message $_[0]',
133 m5 => 'Sorry, I need a message number',
134 m6 => 'Reply to: $_[0]',
135 m7 => 'Subject : $_[0]',
136 m8 => 'Enter Message /EX to send or /ABORT to exit',
137 m9 => 'New mail has arrived for you',
138 m10 => 'Message Aborted',
139 m11 => 'Message no $_[0] saved and directed to $_[1]',
140 m12 => 'Message no $_[0] deleted',
141 m13 => 'Message no $_[0] missing',
142 m14 => 'Message no $_[0] marked as sent to $_[1]',
143 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
144 m16 => 'Need a Message number',
145 m17 => 'Sorry, cannot send messages in $_[0] mode',
146 msg1 => 'Bulletin Messages Queued',
147 msg2 => 'Private Messages Queued',
148 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
149 msgu => 'usage: msg <cmd> <msgno> data...',
150 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
151 moon => 'Location Rise Set Azim Elev RGain dB',
152 mond => 'Monitoring Disabled',
153 mone => 'Monitoring Enabled',
154 namee1 => 'Please enter your name, set/name <your name>',
155 namee2 => 'Can\'t find user $_[0]!',
156 name => 'Your name is now \"$_[0]\"',
157 nodea => '$_[0] set as AK1A style Node',
158 nodeac => '$_[0] created as AK1A style Node',
159 nodec => '$_[0] set as CLX style Node',
160 nodecc => '$_[0] created as CLX style Node',
161 noder => '$_[0] set as AR-Cluster style Node',
162 noderc => '$_[0] created as AR-Cluster style Node',
163 nodes => '$_[0] set as DXSpider style Node',
164 nodesc => '$_[0] created as DXSpider style Node',
165 nodex => '$_[0] set as DXNET style Node',
166 nodexc => '$_[0] created as DXNET style Node',
167 nodeu => '$_[0] set back as a User',
168 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
169 notdone => 'NOT Done',
170 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
171 ok => 'Operation successful',
172 outconn => 'Outstanding connect to $_[0]',
173 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
174 pagelth => 'Page Length is now $_[0]',
175 passerr => 'Please use: SET/PASS <password> <callsign>',
176 password => 'Password set or changed for $_[0]',
177 pingo => 'Ping Started to $_[0]',
178 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
179 pinge1 => 'Cannot ping yourself!',
180 pingint => 'Ping interval on $_[0] set to $_[1] secs',
181 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
182 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
183 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
184 priv => 'Privilege level changed on $_[0]',
185 prx => '$main::mycall >',
186 qll => 'Please enter your location with set/location or set/qra',
187 qthe1 => 'Please enter your QTH, set/qth <your qth>',
188 qth => 'Your QTH is now \"$_[0]\"',
189 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
190 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
191 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
192 qra => 'Your QRA Locator is now \"$_[0]\"',
193 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
194 rec => '$_[0] records',
195 read1 => 'Sorry, no new messages for you',
196 read2 => 'Msg $_[0] not found',
197 read3 => 'Msg $_[0] not available',
198 route => '$_[0] on $_[1] via $_[2]',
199 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
200 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
201 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
202 sat4 => 'Satellites available:-',
203 satnf => 'Satellite $_[0] unknown',
205 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
206 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
207 sethop3 => 'No hops set for $_[0]',
208 shutting => '$main::mycall shutting down...',
209 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
210 snode1 => 'Node Call Sort Version',
211 snode2 => '$_[0] $_[1] $_[2]',
212 snode3 => '$_[0] Unknown Call',
213 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
215 spf1 => 'spoof: creating new user $_[0]',
216 sun => 'Location Rise Set Azim Elev',
217 suser1 => 'usage: callsign user_field_name value',
218 suser2 => 'User $_[0] not found',
219 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
220 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
221 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
222 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
223 time3 => '$_[0] $_[1]',
224 talks => 'Talk flag set on $_[0]',
225 talku => 'Talk flag unset on $_[0]',
226 talkend => 'Finished talking to you',
227 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
228 talkprompt => 'Talk ($_[0])>',
229 talkstart => 'Starting talking to you',
230 usernf => '*** User record for $_[0] not found ***',
231 wwvs => 'WWV flag set on $_[0]',
232 wwvu => 'WWV flag unset on $_[0]',
233 wxs => 'WX flag set on $_[0]',
234 wxu => 'WX flag unset on $_[0]',
237 addr => 'Addres gezet op: $_[0]',
238 already => '$_[0] reeds geconnect',
239 anns => 'Announce berichten AAN gezet voor $_[0]',
240 annu => 'Announce berichten UIT gezet voor $_[0]',
241 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
242 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
243 beepoff => 'De beep staat nu UIT',
244 beepon => 'De beep staat nu AAN',
245 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
246 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
247 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
248 confail => 'Verbinding met $_[0] mislukt ($_[1])',
249 constart => 'Verbinding met $_[0] gestart',
250 disc1 => 'Gedisconnect door $_[0]',
251 disc2 => '$_[0] gedisconnect',
252 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
253 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
254 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
255 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
256 e1 => 'Ongeldige opdracht',
258 e3 => '$_[0]: $_[1] niet gevonden',
259 e4 => 'Minimaal een prefix of een call nodig',
260 e5 => 'Niet toegestaan',
261 e6 => '*** Geen station gespecifiseerd ***',
262 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
263 e8 => 'Ik heb een call en tekst nodig',
264 e9 => 'Ik heb wel tekst nodig voor een announce!',
265 e10 => '$_[0] is niet lokaal verbonden',
266 e12 => 'Ik heb een node call nodig',
267 e13 => '$_[0] is geen node',
268 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
269 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
270 email => 'E-mail addres gezet op: $_[0]',
271 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
272 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
273 heres => 'Aanwezigheid AAN gezet voor $_[0]',
274 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
275 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
276 homebbs => 'Uw Home mailbox is nu $_[0]',
277 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
278 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
279 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
280 iso => '$_[0] is geisoleerd (Isolated)',
281 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
282 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
283 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
284 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
285 lh1 => '$main::data/hop_table.pl bestaat niet',
286 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
287 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
288 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
289 lockout => '$_[0] heeft geen toegang meer (Locked out)',
290 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
291 m2 => '$_[0] Informatie: $_[1]',
292 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
293 msgnew => 'Er is nieuwe post gearriveerd voor u',
294 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
295 namee2 => 'Gebruiker $_[0] niet te vinden!',
296 name => 'Uw naam is gezet op \"$_[0]\"',
297 node => '$_[0] gezet als een AK1A stijl DX-cluster',
298 nodeu => '$_[0] teruggezet naar gebruiker status',
299 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
300 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
301 ok => 'Opdracht succesvol uitgevoerd',
302 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
303 pagelth => 'Paginalengte gezet op ($_[0]) regels',
304 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
305 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
306 pingo => 'Ping gestart naar $_[0]',
307 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
308 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
309 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
310 priv => 'Privilege level gewijzigd op $_[0]',
311 prx => '$main::mycall >',
312 qll => 'Geef uw locator met set/location of set/qra',
313 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
314 qth => 'Uw QTH is nu \"$_[0]\"',
315 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
316 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
317 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
318 qra => 'Uw QRA Locator is nu \"$_[0]\"',
319 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
320 read1 => 'Sorry, geen berichten voor u',
321 read2 => 'Bericht $_[0] niet gevonden',
322 read3 => 'Bericht $_[0] niet beschikbaar',
323 shutting => '$main::mycall gaat QRT...',
324 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
325 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
326 talks => 'Talk berichten AAN gezet voor $_[0]',
327 talku => 'Talk berichten UIT gezet voor $_[0]',
328 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
329 wwvs => 'WWV berichten AAN gezet voor $_[0]',
330 wwvu => 'WWV berichten UIT gezet voor $_[0]',
331 wxs => 'WX berichten AAN gezet voor $_[0]',
332 wxu => 'WX berichten UIT gezet voor $_[0]',
339 addr => 'Dirección es ahora: $_[0]',
340 already => '$_[0] ya esta conctado',
341 anns => 'Anuncios activados $_[0]',
342 annu => 'Anuncios desactivados $_[0]',
343 badnode1 => '$_[0] es ahora un nodo malo',
344 badnode2 => '$_[0] es ahora un nodo bueno',
345 badnode3 => 'Lista de nodos malos:-',
346 bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs <tu bbs>',
347 bbs => 'Tu BBS es ahora \"$_[0]\"',
348 beepoff => 'Beeps desactivados',
349 beepon => 'Beeps activados',
350 call1 => 'Callsign lookup via $_[0]:',
351 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
352 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
353 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
354 confail => 'conexión con $_[0] fallida ($_[1])',
355 constart => 'conexión con $_[0] ha comenzado',
357 disc1 => 'Desconectado por $_[0]',
358 disc2 => '$_[0] desconectado',
359 db1 => 'Esta base de datos está en $_[0]',
360 db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]',
361 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
362 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
363 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
364 db6 => 'Base de datos $_[0] ya existe, bórrala primero',
365 db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]',
366 db8 => 'Base de datos $_[0] creada localmente',
367 db9 => 'Base de datos $_[0] borrada',
368 db10 => '$_[0] records imported into $_[1]',
369 db11 => 'Petición enviada a $_[0], por favor espera...',
370 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
371 dup => 'Lo siento, esto es un duplicado',
372 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
373 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
374 dxs => 'DX Spots activado $_[0]',
375 dxu => 'DX Spots desactivado $_[0]',
376 e1 => 'Comando inválido',
377 e2 => 'Error: $_[0]',
378 e3 => '$_[0]: $_[1] no encontrado',
379 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
380 e5 => 'No permitido',
381 e6 => '*** No se ha especificado una estación ***',
382 e7 => 'indicativo $_[0] no visible en el cluster',
383 e8 => 'Se necesita un indicativo y algo de texto',
384 e9 => 'Se necesita al menos algo de texto',
385 e10 => '$_[0] no conectado en local',
386 e11 => 'Can\'t use $main:mycall as target',
387 e12 => 'Se necesita el indicativo del nodo',
388 e13 => '$_[0] no es un nodo',
389 e14 => 'El primer argumento debe de ser mumérico y > 0',
390 e15 => 'cualificador no válido \"$_[0]\"',
391 e16 => 'El fichero \"$_[0]\" ya existe',
392 e17 => 'Por favor no uses la palabra: @_ aqui',
393 e18 => 'No se puede conectar con $_[0] ($!)',
394 e19 => 'Caracter inválido en la linea',
395 e20 => 'señal $_[0] no reconocido',
396 e21 => '$_[0] no numérico',
397 e22 => '$_[0] no es un indicativo',
398 e23 => '$_[0] fuera de rango (ej: 0/30000)',
399 e24 => 'Lo siento, el acceso a internet no está habilitado',
400 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
402 echoon => 'Habilitado eco',
403 echooff => 'Deshabilitado eco',
404 echow => '*Eco está ahora deshabilitado, set/echo para habilitar',
405 emaile1 => 'Por favor introduce tu E-mail, set/email <tu e-mail>',
406 emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"',
407 email => 'E-mail es ahora: $_[0]',
408 export1 => 'usa: export <msgno> <filename>',
409 export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])',
410 export3 => '$_[2 ] exportando msg $_[0] to $_[1]',
411 filter1 => 'Filtro $_[0] actualizado para $_[1]',
412 filter2 => 'Necesito un valor para $_[0]',
413 filter3 => 'No hay filtros definidos para $_[0]',
414 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
415 filter5 => 'necesito algunos camandos para el filtro...',
416 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
417 grids => 'DX Grid está activado $_[0]',
418 gridu => 'DX Grid está desavtivado $_[0]',
420 hasha => '$_[0] ya existe en $_[1]',
421 hashb => '$_[0] añadido a $_[1]',
422 hashc => '$_[0] eliminado desde $_[1]',
423 hashd => '$_[0] no en $_[1]',
424 hashe => '$_[0] activado $_[1]',
425 helpe1 => 'La ayuda no esta disponible, avisa al sysop',
426 helpe2 => 'No hay ayuda disponible en $_[0]',
427 heres => 'Here activado $_[0]',
428 heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra',
429 hereu => 'Here desactivado $_[0]',
430 homebbs => 'Tu BBS es ahora: $_[0]',
431 homenode => 'Tu Nodo habitual es ahora: $_[0]',
432 hnodee1 => 'Por favor introduce tu nodo local, set/homenode <tu DXCluster local>',
433 hnodee2 => 'Fallo al poner homenode on $_[0]',
434 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
435 init1 => 'enviando mensaje de inicialización a $_[0]',
436 iso => '$_[0] Aislado',
437 isou => '$_[0] Desaislado',
438 isoc => '$_[0] creado y aislado',
439 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
440 l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version',
441 lang => 'El idioma es ahora $_[0]',
442 lange1 => 'set/language <lang> cuando <lang> es uno de ($_[0])',
443 lange2 => 'fallo al poner idioma en $_[0]',
444 lh1 => '$main::data/hop_table.pl no existe',
445 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
446 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)',
447 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
448 lockout => '$_[0] Boloqueado',
449 lockoutc => '$_[0] Creado y bloqueado',
450 lockoutun => '$_[0] Desbloqueado',
451 loginu => 'Usuario $_[0] conectado',
452 logoutu => 'Usuario $_[0] desconectado',
453 loginn => 'Nodo $_[0] conectado',
454 logoutn => 'Nodo $_[0] desconectado',
455 m1 => 'Introduce título (30 caracteres):',
456 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
457 m3 => 'Lo siento, $_[0] no se puede enviar TO dirección',
458 m4 => 'Lo siento, no puedo acceder al mensaje $_[0]',
459 m5 => 'Lo siento, se necesita un número de mensaje',
460 m6 => 'Reenviado a: $_[0]',
461 m7 => 'Título : $_[0]',
462 m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir',
463 m9 => 'Hay correo nuevo para ti',
464 m10 => 'mensaje interrumpido',
465 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
466 m12 => 'mensaje nr $_[0] borrado',
467 m13 => 'mensaje nr $_[0] no encontrado',
468 m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]',
469 m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]',
470 m16 => 'Necesito un número de mensaje',
471 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
472 msg1 => 'Bulletin Messages Queued',
473 msg2 => 'Private Messages Queued',
474 msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]',
475 msgu => 'usa: msg <cmd> <msgno> data...',
476 merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]',
477 moon => 'QTH Salida Puesta Azim Elev RGain dB',
478 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
479 namee2 => 'No se encuentra el usuario $_[0]!',
480 name => 'Tu nombre es ahora \"$_[0]\"',
481 nodea => '$_[0] set as AK1A style Node',
482 nodeac => '$_[0] created as AK1A style Node',
483 nodec => '$_[0] set as CLX style Node',
484 nodecc => '$_[0] created as CLX style Node',
485 noder => '$_[0] set as AR-Cluster style Node',
486 noderc => '$_[0] created as AR-Cluster style Node',
487 nodes => '$_[0] set as DXSpider style Node',
488 nodesc => '$_[0] created as DXSpider style Node',
489 nodex => '$_[0] set as DXNET style Node',
490 nodexc => '$_[0] created as DXNET style Node',
491 nodeu => '$_[0] es ahora un usuario',
492 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
493 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
494 ok => 'Operación realizada',
495 outconn => 'Iniciando conexion con $_[0]',
496 page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >',
497 pagelth => 'La longitud de las páginas es ahora $_[0]',
498 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
499 password => 'Password ajustado o cambiado para $_[0]',
500 pingo => 'Iniciado el ping a $_[0]',
501 pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs',
502 pinge1 => 'No puedes enviarte un ping a ti mismo!',
503 pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos',
504 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
505 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
506 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
507 priv => 'Nivel de privilegios en $_[0]',
508 prx => '$main::mycall >',
509 qll => 'Por favor introduce tu locator con set/location o set/qra',
510 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
511 qth => 'Tu QTH es ahora \"$_[0]\"',
512 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)',
513 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
514 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
515 rec => '$_[0] records',
516 read1 => 'Lo siento, no hay mensajes nuevos para ti',
517 read2 => 'Msg $_[0] no encontrado',
518 read3 => 'Msg $_[0] no disponible',
519 route => '$_[0] en $_[1] via $_[2]',
520 sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos',
521 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
522 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
523 sat4 => 'Satélites disponibles:-',
524 satnf => 'Satélite $_[0] desconocido',
526 sethop1 => 'usa: set/hops <call> ann|spots|wwv|wcy <nr de hops>',
527 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
528 sethop3 => 'No hay hops definidos para $_[0]',
529 shutting => '$main::mycall shutting down...',
530 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
531 snode1 => 'Nodo Call Sort Version',
532 snode2 => '$_[0] $_[1] $_[2]',
533 snode3 => '$_[0] Indicativo desconocido',
534 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
535 sorry => 'Lo siento',
536 spf1 => 'spoof: creando nuevo usuario $_[0]',
537 sun => 'QTH Salida Puesta Azim Elev',
538 suser1 => 'usa: indicativo user_field_name value',
539 suser2 => 'Usuario $_[0] no encontrado',
540 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
541 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
542 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
543 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
544 time3 => '$_[0] $_[1]',
545 talks => 'Talk activado $_[0]',
546 talku => 'Talk desactivado $_[0]',
547 talkend => 'Finalizado modo talk contigo',
548 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
549 talkprompt => 'Talk ($_[0])>',
550 talkstart => 'Iniciando modo talk contigo',
551 usernf => '*** User record for $_[0] no encontrado ***',
552 wwvs => 'WWV activado $_[0]',
553 wwvu => 'WWV desactivado $_[0]',
554 wxs => 'WX activado $_[0]',
555 wxu => 'WX desactivado $_[0]',
projects / spider.git / blob