3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announces enabled for $_[0]',
16 annu => 'Announces disabled for $_[0]',
17 annts => 'AnnTalk enabled for $_[0]',
18 anntu => 'AnnTalk disabled for $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxs => 'DX Spots enabled for $_[0]',
56 dxu => 'DX Spots disabled for $_[0]',
57 e1 => 'Invalid command',
59 e3 => '$_[0]: $_[1] not found',
60 e4 => 'Need at least a prefix or callsign',
62 e6 => '*** No station specified ***',
63 e7 => 'callsign $_[0] not visible on the cluster',
64 e8 => 'Need a callsign and some text',
65 e9 => 'Need at least some text',
66 e10 => '$_[0] not connected locally',
67 e11 => 'Can\'t use $main:mycall as target',
68 e12 => 'Need a node callsign',
69 e13 => '$_[0] is not a node',
70 e14 => 'First argument must be numeric and > 0',
71 e15 => 'invalid qualifier \"$_[0]\"',
72 e16 => 'File \"$_[0]\" exists',
73 e17 => 'Please don\'t use the words: @_ on here',
74 e18 => 'Cannot connect to $_[0] ($!)',
75 e19 => 'Invalid character in line',
76 e20 => 'token $_[0] not recognised',
77 e21 => '$_[0] not numeric',
78 e22 => '$_[0] not a callsign',
79 e23 => '$_[0] not a range (eg 0/30000)',
80 e24 => 'Sorry, Internet access is not enabled',
81 e25 => 'Sorry the value must be between $_[0] and $_[1]',
82 e26 => 'Too many concurrent errors, you are being disconnected',
83 e27 => '$_[0] not a numeric or a callsign prefix',
84 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
85 e29 => 'Need a password',
86 e30 => 'Cannot Open $_[0] $!',
87 e31 => '$_[0] is not a user',
88 e32 => 'Need a passphrase',
90 echoon => 'Echoing enabled',
91 echooff => 'Echoing disabled',
92 echow => '*Echoing is currently disabled, set/echo to enable',
93 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
94 emaila => 'Your E-Mail Address is now \"$_[0]\"',
95 email => 'E-mail address set to: $_[0]',
96 export1 => 'usage: export <msgno> <filename>',
97 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
98 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
99 filter1 => 'Filter $_[0] updated for $_[1]',
100 filter2 => 'Unknown filter keyword $_[0]',
101 filter3 => 'No filters defined for $_[0]',
102 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
103 filter5 => 'need some filter commands...',
104 filter6 => '$_[0]$_[1] Filter for $[2] not found',
105 grids => 'DX Grid enabled for $_[0]',
106 gridu => 'DX Grid disabled for $_[0]',
107 illcall => 'Sorry, $_[0] is an invalid callsign',
108 hasha => '$_[0] already exists in $_[1]',
109 hashb => '$_[0] added to $_[1]',
110 hashc => '$_[0] removed from $_[1]',
111 hashd => '$_[0] not in $_[1]',
112 hashe => '$_[0] set on $_[1]',
113 helpe1 => 'Help system unavailable, tell sysop',
114 helpe2 => 'No help available on $_[0]',
115 heres => 'Here set on $_[0]',
116 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
117 hereu => 'Here unset on $_[0]',
118 homebbs => 'Home BBS set to: $_[0]',
119 homenode => 'Home Node set to: $_[0]',
120 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
121 hnodee2 => 'Failed to set homenode on $_[0]',
122 hnode => 'Your Homenode is now \"$_[0]\"',
123 init1 => 'sent initialisation message to $_[0]',
124 iso => '$_[0] Isolated',
125 isou => '$_[0] UnIsolated',
126 isoc => '$_[0] created and Isolated',
127 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
128 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
129 isow => '$_[0] is isolated; unset/isolate $_[0] first',
130 l1 => 'Sorry $_[0], you are already logged on on another channel',
131 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
132 lang => 'Language is now English',
133 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
134 lange2 => 'failed to set language on $_[0]',
135 lh1 => '$main::data/hop_table.pl doesn\'t exist',
136 loce1 => 'Please enter your location,, set/location <latitude longitude>',
137 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
138 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
139 loc => 'Your Lat/Long is now \"$_[0]\"',
140 lockout => '$_[0] Locked out',
141 lockoutc => '$_[0] Created and Locked out',
142 lockoutun => '$_[0] Unlocked',
143 lockoutuse => 'usage: sh/lockout <call>|ALL',
144 loginu => 'User $_[0] has logged in',
145 logoutu => 'User $_[0] has logged out',
146 loginn => 'Node $_[0] has logged in',
147 logoutn => 'Node $_[0] has logged out',
148 m1 => 'Enter Subject (30 characters):',
149 m2 => 'Copy of msg $_[0] sent to $_[1]',
150 m3 => 'Sorry, $_[0] is an unacceptable TO address',
151 m4 => 'Sorry, can\'t access message $_[0]',
152 m5 => 'Sorry, I need a message number',
153 m6 => 'Reply to: $_[0]',
154 m7 => 'Subject : $_[0]',
155 m8 => 'Enter Message /EX to send or /ABORT to exit',
156 m9 => 'New mail has arrived for you',
157 m10 => 'Message Aborted',
158 m11 => 'Message no $_[0] saved and directed to $_[1]',
159 m12 => 'Message no $_[0] deleted',
160 m13 => 'Message no $_[0] missing',
161 m14 => 'Message no $_[0] marked as sent to $_[1]',
162 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
163 m16 => 'Need a Message number',
164 m17 => 'Sorry, cannot send messages in $_[0] mode',
165 msg1 => 'Bulletin Messages Queued',
166 msg2 => 'Private Messages Queued',
167 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
168 msgu => 'usage: msg <cmd> <msgno> data...',
169 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
170 moon => 'Location dd/mm/yyyy Rise Set',
171 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
172 mond => 'Monitoring Disabled',
173 mone => 'Monitoring Enabled',
174 namee1 => 'Please enter your name, set/name <your name>',
175 namee2 => 'Can\'t find user $_[0]!',
176 name => 'Your name is now \"$_[0]\"',
177 nodea => '$_[0] set as AK1A style Node',
178 nodeac => '$_[0] created as AK1A style Node',
179 nodeb => '$_[0] set as BBS',
180 nodebc => '$_[0] created as BBS',
181 nodec => '$_[0] set as CLX style Node',
182 nodecc => '$_[0] created as CLX style Node',
183 noder => '$_[0] set as AR-Cluster style Node',
184 noderc => '$_[0] created as AR-Cluster style Node',
185 nodes => '$_[0] set as DXSpider style Node',
186 nodesc => '$_[0] created as DXSpider style Node',
187 nodex => '$_[0] set as DXNET style Node',
188 nodexc => '$_[0] created as DXNET style Node',
189 nodeu => '$_[0] set back as a User',
190 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
191 notdone => 'NOT Done',
192 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
193 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
194 ok => 'Operation successful',
195 outconn => 'Outstanding connect to $_[0]',
196 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
197 pagelth => 'Page Length is now $_[0]',
198 passerr => 'Please use: SET/PASS <password> <callsign>',
199 passphrase => 'Passphrase set or changed for $_[0]',
200 passphraseu => 'Passphrase removed for $_[0]',
201 password => 'Password set or changed for $_[0]',
202 passwordu => 'Password removed for $_[0]',
203 pc90s => 'PC90 enabled for $_[0]',
204 pc90u => 'PC90 disabled $_[0]',
205 pingo => 'Ping Started to $_[0]',
206 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
207 pinge1 => 'Cannot ping yourself!',
208 pingint => 'Ping interval on $_[0] set to $_[1] secs',
209 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
210 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
211 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
212 prs => 'Prompt now set to \"$_[0]\"',
213 pru => 'Prompt now set back to default',
214 priv => 'Privilege level changed on $_[0]',
215 prx => '$main::mycall >',
216 pw0 => 'Enter old password: ',
217 pw1 => 'Enter new password: ',
218 pw2 => 'Re-enter new password: ',
219 pw3 => 'Password changed',
220 pw4 => 'Passwords differ, password NOT changed',
221 qll => 'Please enter your location with set/location or set/qra',
222 qthe1 => 'Please enter your QTH, set/qth <your qth>',
223 qth => 'Your QTH is now \"$_[0]\"',
224 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
225 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
226 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
227 qra => 'Your QRA Locator is now \"$_[0]\"',
228 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
229 read1 => 'Sorry, no new messages for you',
230 read2 => 'Msg $_[0] not found',
231 read3 => 'Msg $_[0] not available',
232 rec => '$_[0] records',
233 reg => '$_[0] registered',
234 regc => '$_[0] created and registered',
235 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
236 regun => '$_[0] unregistered',
237 route => '$_[0] on $_[1] via $_[2]',
238 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
239 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
240 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
241 sat4 => 'Satellites available/Age of Keps (days):-',
242 sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
243 satnf => 'Satellite $_[0] unknown',
245 set => '$_[0] enabled for $_[1]',
246 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
247 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
248 sethop3 => 'No hops set for $_[0]',
249 shutting => '$main::mycall shutting down...',
250 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
251 snode1 => 'Node Call Sort Version',
252 snode2 => '$_[0] $_[1] $_[2]',
253 snode3 => '$_[0] Unknown Call',
254 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
256 spf1 => 'spoof: creating new user $_[0]',
257 stathf => 'HF DX Spot Stats, last 31 days',
258 stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]',
259 statvhf => 'VHF+ DX Spot Stats, last 31 days',
260 statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]',
261 statdx => 'Total DX Spots last 31 days',
262 sun => 'Location dd/mm/yyyy Rise Set',
263 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
264 suser1 => 'usage: callsign user_field_name value',
265 suser2 => 'User $_[0] not found',
266 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
267 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
268 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
269 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
270 time3 => '$_[0] $_[1]',
271 talks => 'Talk enabled for $_[0]',
272 talku => 'Talk disabled for $_[0]',
273 talkend => 'Finished talking to you',
274 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
275 talknh => 'Sorry $_[0] is not online at the moment',
276 talkprompt => 'Talk ($_[0])>',
277 talkstart => 'Starting talking to you',
278 unset => '$_[0] disabled for $_[1]',
279 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
280 unsethop2 => 'hops unset on $_[1] for $_[0]',
281 usernf => '*** User record for $_[0] not found ***',
282 wcy1 => '$_[0] is missing or out of range',
283 wcy2 => 'Duplicate WCY',
284 wcys => 'WCY enabled for $_[0]',
285 wcyu => 'WCY disabled for $_[0]',
286 wwv1 => '$_[0] is missing or out of range',
287 wwv2 => 'Duplicate WWV',
288 wwvs => 'WWV enabled for $_[0]',
289 wwvu => 'WWV disabled $_[0]',
290 wxs => 'WX enabled for $_[0]',
291 wxu => 'WX disabled for $_[0]',
294 addr => 'Addres gezet op: $_[0]',
295 already => '$_[0] reeds geconnect',
296 anns => 'Announce berichten AAN gezet voor $_[0]',
297 annu => 'Announce berichten UIT gezet voor $_[0]',
298 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
299 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
300 beepoff => 'De beep staat nu UIT',
301 beepon => 'De beep staat nu AAN',
302 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
303 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
304 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
305 confail => 'Verbinding met $_[0] mislukt ($_[1])',
306 constart => 'Verbinding met $_[0] gestart',
307 disc1 => 'Gedisconnect door $_[0]',
308 disc2 => '$_[0] gedisconnect',
309 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
310 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
311 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
312 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
313 e1 => 'Ongeldige opdracht',
315 e3 => '$_[0]: $_[1] niet gevonden',
316 e4 => 'Minimaal een prefix of een call nodig',
317 e5 => 'Niet toegestaan',
318 e6 => '*** Geen station gespecifiseerd ***',
319 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
320 e8 => 'Ik heb een call en tekst nodig',
321 e9 => 'Ik heb wel tekst nodig voor een announce!',
322 e10 => '$_[0] is niet lokaal verbonden',
323 e12 => 'Ik heb een node call nodig',
324 e13 => '$_[0] is geen node',
325 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
326 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
327 email => 'E-mail addres gezet op: $_[0]',
328 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
329 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
330 heres => 'Aanwezigheid AAN gezet voor $_[0]',
331 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
332 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
333 homebbs => 'Uw Home mailbox is nu $_[0]',
334 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
335 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
336 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
337 iso => '$_[0] is geisoleerd (Isolated)',
338 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
339 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
340 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
341 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
342 lang => 'De taal zijn nu Nederlandse',
343 lh1 => '$main::data/hop_table.pl bestaat niet',
344 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
345 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
346 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
347 lockout => '$_[0] heeft geen toegang meer (Locked out)',
348 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
349 m2 => '$_[0] Informatie: $_[1]',
350 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
351 msgnew => 'Er is nieuwe post gearriveerd voor u',
352 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
353 namee2 => 'Gebruiker $_[0] niet te vinden!',
354 name => 'Uw naam is gezet op \"$_[0]\"',
355 node => '$_[0] gezet als een AK1A stijl DX-cluster',
356 nodeu => '$_[0] teruggezet naar gebruiker status',
357 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
358 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
359 ok => 'Opdracht succesvol uitgevoerd',
360 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
361 pagelth => 'Paginalengte gezet op ($_[0]) regels',
362 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
363 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
364 pingo => 'Ping gestart naar $_[0]',
365 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
366 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
367 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
368 priv => 'Privilege level gewijzigd op $_[0]',
369 prx => '$main::mycall >',
370 qll => 'Geef uw locator met set/location of set/qra',
371 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
372 qth => 'Uw QTH is nu \"$_[0]\"',
373 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
374 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
375 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
376 qra => 'Uw QRA Locator is nu \"$_[0]\"',
377 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
378 read1 => 'Sorry, geen berichten voor u',
379 read2 => 'Bericht $_[0] niet gevonden',
380 read3 => 'Bericht $_[0] niet beschikbaar',
381 shutting => '$main::mycall gaat QRT...',
382 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
383 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
384 talks => 'Talk berichten AAN gezet voor $_[0]',
385 talku => 'Talk berichten UIT gezet voor $_[0]',
386 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
387 wwvs => 'WWV berichten AAN gezet voor $_[0]',
388 wwvu => 'WWV berichten UIT gezet voor $_[0]',
389 wxs => 'WX berichten AAN gezet voor $_[0]',
390 wxu => 'WX berichten UIT gezet voor $_[0]',
395 addr => 'La dirección es ahora: $_[0]',
396 already => '$_[0] ya está conectado',
397 anns => 'Activada la recepción de anuncios para $_[0]',
398 annu => 'Desactivada la recepción de anuncios para $_[0]',
399 annts => 'Modo AnnTalk activado para $_[0]',
400 anntu => 'Modo AnnTalk desactivado para $_[0]',
401 badnode1 => 'No se aceptan spots generados en $_[0], se añade a la lista badnode',
402 badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode',
403 badnode3 => 'Lista de nodos rechazados:',
404 bbse1 => 'Por favor introduce tu BBS, set/bbs <tu bbs>',
405 bbs => 'Tu BBS es ahora \"$_[0]\"',
406 beepoff => 'Avisos sonoros desactivados',
407 beepon => 'Avisos sonoros activados',
408 call1 => 'Se encontró el indicativo vía $_[0]:',
409 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
410 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
411 conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect',
412 confail => 'La conexión con $_[0] ha fallado ($_[1])',
413 constart => 'Se inicia la conexión a $_[0]',
414 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
415 db1 => 'Esta base de datos está en $_[0]',
416 db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]',
417 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
418 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
419 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
420 db6 => 'La base de datos $_[0] ya existe, bórrala primero',
421 db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]',
422 db8 => 'Base de datos $_[0] creada localmente',
423 db9 => 'La base de datos $_[0] ha sido eliminada',
424 db10 => '$_[0] registros importados para la base de datos $_[1]',
425 db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...',
426 dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw',
427 dir1 => 'No hay mensajes nuevos',
428 disc1 => 'Desconectado por $_[0]',
429 disc2 => 'Canal $_[0] desconectado',
430 disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada',
431 disc4 => 'No existía el canal o la conexión, $_[0] se elimina',
433 dup => 'Lo siento, esto es un duplicado',
434 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
435 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
436 dx3 => 'El indicativo o la frecuencia es incorrecta',
437 dxs => 'Activada la recepción de spots de DX para $_[0]',
438 dxu => 'Desactivada la recepción de spots de DX para $_[0]',
439 e1 => 'Este comando no es válido',
440 e2 => 'Error: $_[0]',
441 e3 => '$_[0]: $_[1] no encontrado',
442 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
443 e5 => 'No estás autorizado',
444 e6 => '*** No se ha especificado una estación ***',
445 e7 => 'El indicativo $_[0] no es visible en el cluster',
446 e8 => 'Se necesita un indicativo y algún texto',
447 e9 => 'Se necesita al menos algún texto',
448 e10 => '$_[0] no se encuentra conectado',
449 e11 => 'No puedes usar tu propio $main:mycall como destino',
450 e12 => 'Se necesita el indicativo del nodo',
451 e13 => '$_[0] no es un nodo',
452 e14 => 'El primer argumento debe de ser numérico y > 0',
453 e15 => 'calificador no válido \"$_[0]\"',
454 e16 => 'El fichero \"$_[0]\" ya existe',
455 e17 => 'Por favor no uses la palabra: @_ aquí',
456 e18 => 'No se puede conectar con $_[0] ($!)',
457 e19 => 'Carácter no válido en la línea',
458 e20 => 'Símbolo $_[0] no reconocido',
459 e21 => '$_[0] no es numérico',
460 e22 => '$_[0] no es un indicativo',
461 e23 => '$_[0] fuera de rango (ej: 0/30000)',
462 e24 => 'Lo siento, el acceso a internet no está habilitado',
463 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
464 e26 => 'Demasiados errores, serás desconectado',
465 e27 => '$_[0] no es un numero o un prefijo',
466 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
467 e29 => 'Necesitas password',
468 echoon => 'Eco local activado',
469 echooff => 'Eco local desactivado',
470 echow => '*Eco local desactivado, set/echo para activarlo',
471 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
472 emaila => 'Tu dirección E-Mail es ahora \"$_[0]\"',
473 email => 'La dirección E-mail es ahora: $_[0]',
474 export1 => 'uso: export <numero_mensaje> <nombre_fichero>',
475 export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])',
476 export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]',
477 filter1 => 'Filtro $_[0] actualizado para $_[1]',
478 filter2 => 'Es necesario un valor para $_[0]',
479 filter3 => 'No hay filtros definidos para $_[0]',
480 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
481 filter5 => 'Se necesitan algunos comandos para el filtro...',
482 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
483 grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]',
484 gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]',
485 illcall => 'Lo siento, $_[0] no es un indicativo válido',
486 hasha => '$_[0] ya existe en $_[1]',
487 hashb => '$_[0] añadido a $_[1]',
488 hashc => '$_[0] eliminado desde $_[1]',
489 hashd => '$_[0] no en $_[1]',
490 hashe => '$_[0] activado $_[1]',
491 helpe1 => 'La ayuda no está disponible, comunícaselo al sysop',
492 helpe2 => 'No hay ayuda disponible para $_[0]',
493 heres => 'Se informa a la red: $_[0] está presente',
494 heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra',
495 hereu => 'Se informa a la red: $_[0] está ausente',
496 homebbs => 'Tu BBS es ahora: $_[0]',
497 homenode => 'Tu cluster habitual es ahora: $_[0]',
498 hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>',
499 hnodee2 => 'Error al definir homenode en $_[0]',
500 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
501 init1 => 'Enviado mensaje de inicialización a $_[0]',
502 iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)',
503 isou => 'El cluster $_[0] se pone en modo activo',
504 isoc => '$_[0] creado y definido como pasivo (Aislado)',
505 isoari => 'Existe un filtro de entrada de rutas para $_[0]; clear/route input $_[0] primero',
506 isoaro => 'Existe un filtro de rutas hacia $_[0]; clear/route $_[0] primero',
507 isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero',
508 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
509 l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version',
510 lang => 'El idioma es ahora Español',
511 lange1 => 'set/language <idioma> donde <idioma> es uno entre ($_[0])',
512 lange2 => 'fallo al seleccionar idioma en $_[0]',
513 lh1 => '$main::data/hop_table.pl no existe',
514 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
515 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)',
516 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
517 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
518 lockout => '$_[0] Excluido del sistema',
519 lockoutc => '$_[0] Creado y excluido del sistema',
520 lockoutun => '$_[0] autorizado para conectar',
521 lockoutuse => 'Uso: sh/lockout <indicativo|prefijo>|ALL',
522 loginu => '$_[0] conecta',
523 logoutu => '$_[0] se desconecta',
524 loginn => '$_[0] conecta',
525 logoutn => '$_[0] se desconecta',
526 m1 => 'Introduce el título (máx. 30 caractéres):',
528 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
529 m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico',
530 m4 => 'Lo siento, no se puede acceder al mensaje $_[0]',
531 m5 => 'Lo siento, se necesita un número de mensaje',
532 m6 => 'Reenviado a: $_[0]',
533 m7 => 'Título : $_[0]',
534 m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir',
535 m9 => 'Hay correo nuevo para ti. Bórralo una vez leído.',
536 m10 => 'mensaje interrumpido',
537 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
538 m12 => 'mensaje nr $_[0] borrado',
539 m13 => 'mensaje nr $_[0] no encontrado',
540 m14 => 'mensaje nr $_[0] marcado para ser enviado a $_[1]',
541 m15 => 'mensaje nr $_[0] no se enviará a $_[1]',
542 m16 => 'Se necesita un número de mensaje',
543 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
544 msg1 => 'Cola de mensajes tipo Boletín',
545 msg2 => 'Cola de mensajes tipo Privados',
546 msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]',
547 msgu => 'uso: msg <cmd> <msgno> data...',
548 merge1 => 'Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]',
549 moon => 'QTH dd/mm/yyyy Salida Puesta',
550 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
551 mond => 'Activado modo monitor',
552 mone => 'Desactivado modo monitor',
553 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
554 namee2 => 'No se encuentra el usuario $_[0]!',
555 name => 'Tu nombre es \"$_[0]\"',
556 nodea => '$_[0] definido como nodo AK1A ',
557 nodeac => '$_[0] creado como nodo AK1A ',
558 nodeb => '$_[0] definido como BBS',
559 nodebc => '$_[0] creado como BBS',
560 nodec => '$_[0] definido como nodo CLX ',
561 nodecc => '$_[0] creado como nodo CLX ',
562 noder => '$_[0] definido como nodo AR-Cluster ',
563 noderc => '$_[0] creado como nodo AR-Cluster ',
564 nodes => '$_[0] definido como nodo DXSpider ',
565 nodesc => '$_[0] creado como nodo DXSpider ',
566 nodex => '$_[0] definido como nodo DXNET ',
567 nodexc => '$_[0] creado como nodo DXNET ',
568 nodeu => '$_[0] es ahora un usuario',
569 nodee1 => 'No puedes usar este comando mientras tu objetivo ($_[0]) se encuentra',
570 notdone => 'No se pudo hacer',
571 nothere => 'Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde',
572 obscount => 'El parámetro Ping obsolescence count para $_[0] ajustado a $_[1]',
573 ok => 'Operación realizada',
574 outconn => 'Iniciando conexión con $_[0]',
575 page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >',
576 pagelth => 'La longitud de las páginas es ahora $_[0]',
577 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
578 password => 'El Password ha sido definido o cambiado para $_[0]',
579 pingo => 'Iniciado el ping a $_[0]',
580 pingi => 'Ping devuelto por $_[0] $_[1] (Ave $_[2]) segundos',
581 pinge1 => 'No puedes enviarte un ping a ti mismo!',
582 pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos',
583 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]',
584 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
585 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
586 prs => 'El Prompt ha sido cambiado a \"$_[0]\"',
587 pru => 'El Prompt vuelve a ser el normal por defecto',
588 priv => 'Nivel de privilegios está en $_[0]',
589 prx => '$main::mycall >',
590 pw0 => 'Escribe el password antiguo: ',
591 pw1 => 'Escribe el nuevo password: ',
592 pw2 => 'Confirma el nuevo password: ',
593 pw3 => 'El Password ha sido cambiado',
594 pw4 => 'Los passwords no coinciden, NO se han cambiado',
595 qll => 'Por favor introduce tu locator con set/location o set/qra',
596 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
597 qth => 'Tu QTH es ahora \"$_[0]\"',
598 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)',
599 qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS',
600 qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)',
601 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
602 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
603 read1 => 'Lo siento, no hay mensajes nuevos para ti',
604 read2 => 'Mensaje $_[0] no encontrado',
605 read3 => 'Mensaje $_[0] no disponible',
606 rec => '$_[0] registros',
607 reg => '$_[0] registrado',
608 regc => '$_[0] creado y registrado',
609 reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)',
610 regun => '$_[0] borrado',
611 route => '$_[0] en $_[1] vía $_[2]',
612 sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos',
613 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
614 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
615 sat4 => 'Satélites disponibles:',
616 sat5 => 'Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje',
617 satnf => 'Satélite $_[0] desconocido',
619 sethop1 => 'uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>',
620 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
621 sethop3 => 'No hay hops definidos para $_[0]',
622 shutting => '$main::mycall shutting down...',
623 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
624 snode1 => 'Nodo Call Sort Versión',
625 snode2 => '$_[0] $_[1] $_[2]',
626 snode3 => '$_[0] Indicativo desconocido',
627 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
628 sorry => 'Lo siento',
629 spf1 => 'spoof: creando nuevo usuario $_[0]',
630 stathf => 'Estadísticas de spots en HF de los últimos 31 días',
631 stathft => 'Estadísticas de spots en HF de los últimos 31 días para DXCC $_[0]',
632 statvhf => 'VHF+ DX Spot Stats, últimos 31 días',
633 statvhft => 'VHF+ DX Spot Stats, últimos 31 días para DXCC $_[0]',
634 statdx => 'Total DX Spots últimos 31 días',
635 sun => 'QTH dd/mm/yyyy Salida Puesta',
636 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
637 suser1 => 'uso: indicativo user_field_name valor',
638 suser2 => 'Usuario $_[0] no encontrado',
639 suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'',
640 suser4 => 'User field name \'$_[0]\' no existe',
641 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
642 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
643 time3 => '$_[0] $_[1]',
644 talks => 'Recepción de mensajes Talk activado para $_[0]',
645 talku => 'Recepción de mensajes Talk desactivado para $_[0]',
646 talkend => 'Finalizado modo talk contigo',
647 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
648 talknh => 'Lo siento $_[0] no está conectado en este momento',
649 talkprompt => 'Talk ($_[0])>',
650 talkstart => 'Iniciando modo talk contigo',
651 unsethop1 => 'uso: unset/hops <call> ann|spots|wwv|wcy',
652 unsethop2 => 'Borrados los hops para $_[1] en $_[0]',
653 usernf => '*** Registro de usuario $_[0] no encontrado ***',
654 wwvs => 'Activada recepción de anuncios WWV para $_[0]',
655 wwvu => 'Desactivada recepción de anuncios WWV para $_[0]',
656 wxs => 'Activada recepción de anuncios WX para $_[0]',
657 wxu => 'Desactivada recepción de anuncios WX para $_[0]',
660 addr => 'Adresse gesetzt auf: $_[0]',
661 already => '$_[0] bereits connnected',
662 anns => 'Announce flag gesetzt auf $_[0]',
663 annu => 'Announce flag zurueckgesetzt auf $_[0]',
664 annts => 'AnnTalk flag gesetzt auf $_[0]',
665 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
666 badnode1 => '$_[0] ist nun ein bad node',
667 badnode2 => '$_[0] ist nun ein good node',
668 badnode3 => 'Liste der Bad Nodes:-',
669 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
670 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
671 beepoff => 'Beeps sind nun aus',
672 beepon => 'Beeps sind nun eingeschaltet',
673 call1 => 'Callsign lookup via $_[0]:',
674 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
675 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
676 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
677 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
678 constart => 'Verbindung zu $_[0] gestartet',
679 deluser => 'User $_[0] wurde geloescht',
680 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
681 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
682 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
683 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
684 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
685 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
686 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
687 db8 => 'Datenbank $_[0] lokal angelegt',
688 db9 => 'Datenbank $_[0] entfernt',
689 db10 => '$_[0] Datensaetze importiert in $_[1]',
690 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
691 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
692 dir1 => 'Keine Nachricht gefunden',
693 disc1 => 'Disconnected von $_[0]',
694 disc2 => 'Kanal $_[0] disconnected',
695 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
696 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
698 dup => 'Sorry, dies ist ein Duplikat',
699 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
700 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
701 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
702 dxs => 'DX Spots flag gesetzt auf $_[0]',
703 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
704 e1 => 'Ungueltiger Befehl',
705 e2 => 'Fehler: $_[0]',
706 e3 => '$_[0]: $_[1] nicht gefunden',
707 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
708 e5 => 'Nicht erlaubt',
709 e6 => '*** Keine Station angegeben ***',
710 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
711 e8 => 'Brauche ein Rufzeichen und etwas Text',
712 e9 => 'Brauche wenigstens etwas Text',
713 e10 => '$_[0] nicht lokal connected',
714 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
715 e12 => 'Brauche ein Node Rufzeichen',
716 e13 => '$_[0] ist kein Node',
717 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
718 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
719 e16 => 'Datei \"$_[0]\" existiert',
720 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
721 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
722 e19 => 'Ungueltiger Character in der Zeile',
723 e20 => 'Kuerzel $_[0] nicht erkannt',
724 e21 => '$_[0] nicht numerisch',
725 e22 => '$_[0] kein Rufzeichen',
726 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
727 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
729 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
730 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
731 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
732 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
733 e29 => 'Brauche eine Passwort',
734 echoon => 'Echo enabled',
735 echooff => 'Echo disabled',
736 echow => '*Echo ist im moment disabled, set/echo to enable',
737 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
738 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
739 email => 'E-mail Adresse gesetzt auf: $_[0]',
740 export1 => 'Gebrauch: export <msgno> <dateiname>',
741 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
742 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
743 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
744 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
745 filter3 => 'Keine Filter definiert fuer $_[0]',
746 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
747 filter5 => 'brauche ein paar Filter Kommandos...',
748 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
749 grids => 'DX Grid flag gesetzt auf $_[0]',
750 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
751 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
752 hasha => '$_[0] existiert bereits in $_[1]',
753 hashb => '$_[0] zugefuegt zu $_[1]',
754 hashc => '$_[0] entfernt von $_[1]',
755 hashd => '$_[0] nicht in $_[1]',
756 hashe => '$_[0] gesetzt auf $_[1]',
757 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
758 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
759 heres => 'Hier gesetzt auf $_[0]',
760 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
761 hereu => 'Here zurueckgesetzt auf $_[0]',
762 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
763 homenode => 'Heimat Node gesetzt auf: $_[0]',
764 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
765 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
766 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
767 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
768 iso => '$_[0] Isoliert',
769 isou => '$_[0] UnIsoliert',
770 isoc => '$_[0] erstellt und Isoliert',
771 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
772 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
773 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
774 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
775 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
776 lang => 'Sprache ist jetzt Deutch',
777 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
778 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
779 lh1 => '$main::data/hop_table.pl existiert nicht',
780 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
781 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
782 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
783 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
784 lockout => '$_[0] ausgesperrt',
785 lockoutc => '$_[0] erstellt und ausgesperrt',
786 lockoutun => '$_[0] Aussperrung aufgehoben',
787 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
788 loginu => 'User $_[0] hat eingeloggt',
789 logoutu => 'User $_[0] hat ausgeloggt',
790 loginn => 'Node $_[0] hat eingeloggt',
791 logoutn => 'Node $_[0] hat ausgeloggt',
792 m1 => 'Subjekt eingeben (30 Zeichen):',
793 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
794 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
795 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
796 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
797 m6 => 'Reply to: $_[0]',
798 m7 => 'Subject : $_[0]',
799 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
800 m9 => 'Neue Nachricht(en) fuer Dich',
801 m10 => 'Nachricht abgebrochen',
802 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
803 m12 => 'Nachricht Nr. $_[0] geloescht',
804 m13 => 'Nachricht Nr. $_[0] fehlt',
805 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
806 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
807 m16 => 'Brauche eine Nachrichten Nummer',
808 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
809 msg1 => 'Bulletin Nachrichten aufgeschoben',
810 msg2 => 'Private Nachrichten aufgeschoben',
811 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
812 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
813 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
814 moon => 'Standort dd/mm/yyyy Rise Set',
815 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
816 mond => 'Ueberwachung Disabled',
817 mone => 'Ueberwachung Enabled',
818 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
819 namee2 => 'Kann User $_[0]nicht finden!',
820 name => 'Dein Name ist jetzt \"$_[0]\"',
821 nodea => '$_[0] gesetzt als AK1A style Node',
822 nodeac => '$_[0] erstellt als AK1A style Node',
823 nodeb => '$_[0] gesetzt als BBS',
824 nodebc => '$_[0] erstellt als BBS',
825 nodec => '$_[0] gesetzt als CLX style Node',
826 nodecc => '$_[0] erstellt als CLX style Node',
827 noder => '$_[0] gesetzt als AR-Cluster style Node',
828 noderc => '$_[0] erstellt als AR-Cluster style Node',
829 nodes => '$_[0] gesetzt als DXSpider style Node',
830 nodesc => '$_[0] erstellt als DXSpider style Node',
831 nodex => '$_[0] gesetzt als DXNET style Node',
832 nodexc => '$_[0] erstellt als DXNET style Node',
833 nodeu => '$_[0] zurueckgesetzt als ein User',
834 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
835 notdone => 'Nicht ausgefuehrt',
836 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
837 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
838 ok => 'Operation erfolgreich',
839 outconn => 'Outstanding connect to $_[0]',
840 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
841 pagelth => 'Seitenlaenge ist nun $_[0]',
842 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
843 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
844 passwordu => 'Passwort geloescht fuer $_[0]',
845 pingo => 'Ping Started to $_[0]',
846 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
847 pinge1 => 'Cannot ping yourself!',
848 pingint => 'Ping interval on $_[0] set to $_[1] secs',
849 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
850 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
851 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
852 priv => 'Priviligierten Level geaendert auf $_[0]',
853 prx => '$main::mycall >',
854 pw0 => 'Altes Passwort eingeben: ',
855 pw1 => 'Neues Passwort eingeben: ',
856 pw2 => 'Wiederhole neues Passwort: ',
857 pw3 => 'Passwort geaendert',
858 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
859 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
860 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
861 qth => 'Dein QTH ist nun \"$_[0]\"',
862 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
863 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
864 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
865 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
866 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
867 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
868 read2 => 'Msg $_[0] nicht gefunden',
869 read3 => 'Msg $_[0] nicht verfuegbar',
870 rec => '$_[0] records',
871 reg => '$_[0] registriert',
872 regc => '$_[0] erstellt und registriert',
873 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
874 regun => '$_[0] unregistriert',
875 route => '$_[0] auf $_[1] via $_[2]',
876 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
877 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
878 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
879 sat4 => 'Satelliten verfuegbar:-',
880 satnf => 'Satellit $_[0] unbekannt',
882 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
883 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
884 sethop3 => 'Keine hops gesetzt fuer $_[0]',
885 shutting => '$main::mycall shutting down...',
886 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
887 snode1 => 'Node Call Sort Version',
888 snode2 => '$_[0] $_[1] $_[2]',
889 snode3 => '$_[0] Unbekanntes Rufzeichen',
890 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
892 spf1 => 'spoof: erzeuge neuen User $_[0]',
893 stathf => 'HF DX Spot Stats, letzte 31 Tage',
894 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
895 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
896 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
897 statdx => 'Total DX Spots letzte 31 Tage',
898 sun => 'Location dd/mm/yyyy Rise Set',
899 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
900 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
901 suser2 => 'User $_[0] nicht gefunden',
902 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
903 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
904 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
905 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
906 time3 => '$_[0] $_[1]',
907 talks => 'Talk flag gesetzt auf $_[0]',
908 talku => 'Talk flag zurueckgesetzt auf $_[0]',
909 talkend => 'Beendet Talk zu Dir',
910 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
911 talknh => 'Sorry $_[0] ist im moment nicht online',
912 talkprompt => 'Talk ($_[0])>',
913 talkstart => 'Startet Talkmode zu Dir',
914 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
915 wwvs => 'WWV flag gesetzt auf $_[0]',
916 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
917 wxs => 'WX flag gesetzt auf $_[0]',
918 wxu => 'WX flag zurueckgesetzt auf $_[0]',
921 addr => 'Indirizzo impostato a: $_[0]',
922 already => '$_[0] e\' connesso',
923 anns => 'Annunci attivati alle_[0]',
924 annu => 'Annunci disattivati alle $_[0]',
925 annts => 'Talk attivato alle $_[0]',
926 anntu => 'Talk disattivato alle $_[0]',
927 badnode1 => '$_[0] e\' un nodo disabilitato',
928 badnode2 => '$_[0] e\' un nodo attivo',
929 badnode3 => 'Lista dei nodi disabilitati:-',
930 bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs <tuo bbs>',
931 bbs => 'Il tuo BBS e\' ora \"$_[0]\"',
932 beepoff => 'I beep sono disattivati',
933 beepon => 'I beep sono attivati',
934 call1 => 'Ricerca del nominativo via $_[0]:',
935 conother => 'Spiacente $_[0] sei connesso già su un\'altra porta',
936 concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])',
937 conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect',
938 confail => 'connessione a $_[0] fallita ($_[1])',
939 constart => 'connessione a $_[0] iniziata',
940 deluser => 'L\'utente $_[0] e\' stato eliminato',
941 db1 => 'Questo database e\' presso $_[0]',
942 db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]',
943 db3 => 'Spiacente, il database $_[0] non esiste qui',
944 db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento',
945 db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...',
946 db6 => 'Il database $_[0] esiste già, cancellalo prima',
947 db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]',
948 db8 => 'Il database $_[0] e\' stato creato localmente',
949 db9 => 'Il database $_[0] e\' stato eliminato',
950 db10 => '$_[0] record importati in $_[1]',
951 db11 => 'Sto inviando le tue richieste a $_[0], attendi...',
952 dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw',
953 dir1 => 'Nessun messaggio trovato',
954 disc1 => 'Disconnesso da $_[0]',
955 disc2 => 'Canalew $_[0] disconnesso',
956 disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa',
957 disc4 => 'Nessun canale o connessione ma $_[0] disconnesso',
959 dup => 'Spiacente, questo e\' un doppione',
960 dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento',
961 dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento',
962 dx3 => 'Il nominativo o la frequenza sono errati',
963 dxs => 'DX Spots attivati alle $_[0]',
964 dxu => 'DX Spots disattivati alle $_[0]',
965 e1 => 'Comando errato',
966 e2 => 'Errore: $_[0]',
967 e3 => '$_[0]: $_[1] non trovato',
968 e4 => 'Inserire un prefisso o un nominativo',
969 e5 => 'Non permesso',
970 e6 => '*** Nessuna stazione specificata ***',
971 e7 => 'il nominativo $_[0] non e\' visibile sul cluster',
972 e8 => 'Inserire un nominativo o del testo',
973 e9 => 'Inserire del testo',
974 e10 => '$_[0] non connesso localmente',
975 e11 => 'Impossibile usare $main:mycall come destinazione',
976 e12 => 'Inserire il nominativo di un nodo',
977 e13 => '$_[0] non e\' un nodo',
978 e14 => 'Il primo argomento deve essere numerico e > 0',
979 e15 => 'qualificatore non valido \"$_[0]\"',
980 e16 => 'Il file \"$_[0]\" esiste',
981 e17 => 'Non usare le parole: @_ qui',
982 e18 => 'Impossibile connettere $_[0] ($!)',
983 e19 => 'Carattere non valido nella linea',
984 e20 => 'separatore $_[0] non riconosciuto',
985 e21 => '$_[0] non e\' numerico',
986 e22 => '$_[0] non e\' un nominativo',
987 e23 => '$_[0] non e\' un intervallo (es 0/30000)',
988 e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato',
989 e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]',
990 e26 => 'Troppi errori, stai per essere disconnesso',
991 e27 => '$_[0] non e\' un prefisso numeroco o di nominativo',
992 e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)',
993 e29 => 'E\' necessaria una password',
995 echoon => 'Echo abilitato',
996 echooff => 'Echo disabilitato',
997 echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo',
998 emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>',
999 emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"',
1000 email => 'Indirizzo email impostato a: $_[0]',
1001 export1 => 'sintassi: export <num_mess> <nome_file>',
1002 export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])',
1003 export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]',
1004 filter1 => 'Filtro $_[0] aggiornato per $_[1]',
1005 filter2 => 'Chiave sconosciuta per il filtro $_[0]',
1006 filter3 => 'Nessun filtro definito per $_[0]',
1007 filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]',
1008 filter5 => 'necessito qualche comando per i filtri...',
1009 filter6 => '$_[0]$_[1] Filtro per $[2] non trovato',
1010 grids => 'DX Grid attivato alle $_[0]',
1011 gridu => 'DX Grid disattivato alle $_[0]',
1012 illcall => 'Spiacente, $_[0] non e\' un nominativo valido',
1013 hasha => '$_[0] già esiste $_[1]',
1014 hashb => '$_[0] aggiunto a $_[1]',
1015 hashc => '$_[0] rimosso da $_[1]',
1016 hashd => '$_[0] non in $_[1]',
1017 hashe => '$_[0] impostato a $_[1]',
1018 helpe1 => 'Aiuto non disponibile, contatta il sysop',
1019 helpe2 => 'Nessun aiuto per $_[0]',
1020 heres => 'Here abilitato per $_[0]',
1021 heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra',
1022 hereu => 'Here disattivato per $_[0]',
1023 homebbs => 'Home BBS impostata a: $_[0]',
1024 homenode => 'Home Node impostato a: $_[0]',
1025 hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>',
1026 hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]',
1027 hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"',
1028 init1 => 'inizializzaione inviata a $_[0]',
1029 iso => '$_[0] Isolato',
1030 isou => '$_[0] non Isolato',
1031 isoc => '$_[0] creato ed isolato',
1032 isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima',
1033 isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima',
1034 isow => '$_[0] e\' isolato; unset/isolate $_[0] prima',
1035 l1 => 'Spiacente $_[0], sei già collegato sun un altro canale',
1036 l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build',
1037 lang => 'La lingua selezionata e\' adesso Italiano',
1038 lange1 => 'set/language <lingua> dove <lingua> e\' una tra ($_[0])',
1039 lange2 => 'impostazione lingua fallita per $_[0]',
1040 lh1 => '$main::data/hop_table.pl non esiste',
1041 loce1 => 'Per piacere inserisci la tua posizione, set/location <latitudine longitudine>',
1042 loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)',
1043 loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]',
1044 loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"',
1045 lockout => '$_[0] Bloccato',
1046 lockoutc => '$_[0] Creato e bloccato',
1047 lockoutun => '$_[0] Sbloccato',
1048 lockoutuse => 'sintassi: sh/lockout <nominativo>|ALL',
1049 loginu => 'L\'utente $_[0] e\' entrato nel cluster',
1050 logoutu => 'L\'utente $_[0] e\' uscito dal cluster',
1051 loginn => 'Il nodo $_[0] si e\' connesso',
1052 logoutn => 'Il nodo $_[0] si e\' disconnesso',
1053 m1 => 'Inserisci il Soggetto (30 caratteri):',
1054 m2 => 'Copia del messaggio $_[0] spedita a $_[1]',
1055 m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile',
1056 m4 => 'Spiacente, non posso accedere al messaggio $_[0]',
1057 m5 => 'Spiacente, ho bisogno del numero di un messaggio',
1058 m6 => 'Rispondi a: $_[0]',
1059 m7 => 'Soggetto : $_[0]',
1060 m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire',
1061 m9 => 'Nuovi messaggi sono arrivati per te',
1062 m10 => 'Messaggio abortito',
1063 m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]',
1064 m12 => 'Il messaggio $_[0] e\' stato cancellato',
1065 m13 => 'Il messaggio $_[0] non esiste',
1066 m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]',
1067 m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]',
1068 m16 => 'Specificare il numero del messaggio',
1069 m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]',
1070 msg1 => 'Bollettino messo in coda',
1071 msg2 => 'Messaggio messo in coda',
1072 msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]',
1073 msgu => 'sintassi: msg <comando> <num_mess> dati...',
1074 merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]',
1075 moon => 'Localita gg/mm/aaaa Alba Tramonto',
1076 moon_with_azel => 'Località
1077 gg/mm/aaaa Alba Tramonto Azim Elev',
1078 mond => 'Monitor disabilitato',
1079 mone => 'Monitor abilitato',
1080 namee1 => 'Per favore inserisci con set/name <nome>',
1081 namee2 => 'Impossibile trovare l\'utente $_[0]!',
1082 name => 'Il tuo nome ora e\' \"$_[0]\"',
1083 nodea => '$_[0] impostato come nodo stile AK1A',
1084 nodeac => '$_[0] creato come nodo stile AK1A',
1085 nodeb => '$_[0] impostato come BBS',
1086 nodebc => '$_[0] creato come BBS',
1087 nodec => '$_[0] impostato come nodo stile CLX',
1088 nodecc => '$_[0] creato come nodo stile CLX',
1089 noder => '$_[0] impostato come nodo stile AR-Cluster',
1090 noderc => '$_[0] creato come nodo stile AR-Cluster',
1091 nodes => '$_[0] impostato come nodo stile DXSpider',
1092 nodesc => '$_[0] creato come nodo stile DXSpider',
1093 nodex => '$_[0] impostato come nodo stile DXNET',
1094 nodexc => '$_[0] creato come nodo stile DXNET',
1095 nodeu => '$_[0] impostato come utente',
1096 nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso',
1097 notdone => 'Non eseguito',
1098 nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi',
1099 obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]',
1100 ok => 'Operazione eseguita con successo',
1101 outconn => 'Connessione in corso per $_[0]',
1102 page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >',
1103 pagelth => 'La lunghezza della pagina e\' adesso $_[0]',
1104 passerr => 'sintassi: SET/PASS <password> <nominativo>',
1105 password => 'Password impostata o cambiata per $_[0]',
1106 passwordu => 'Password rimossa per $_[0]',
1107 pingo => 'Ping mandato a $_[0]',
1108 pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi',
1109 pinge1 => 'Non puoi far un ping su te stesso!',
1110 pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi',
1111 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]',
1112 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1113 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1114 priv => 'Privilegi cambiati per $_[0]',
1115 prs => 'Prompt impostato a \"$_[0]\"',
1116 pru => 'Prompt reimpostato al predefinito',
1117 prx => '$main::mycall >',
1118 pw0 => 'Inserisci la vecchia password: ',
1119 pw1 => 'Inserisci la nuova password: ',
1120 pw2 => 'Reinserisci la nuova password: ',
1121 pw3 => 'Password modificata',
1122 pw4 => 'Le password sono differenti, password NON cambiata',
1123 qll => 'Per favore inserisci la tua località con set/location o set/qra',
1124 qthe1 => 'Per favore inserisci il tuo QTH con set/qth <qth>',
1125 qth => 'Il tuo QTH e\' adesso \"$_[0]\"',
1126 qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)',
1127 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
1128 qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)',
1129 qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"',
1130 rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]',
1131 rec => '$_[0] records',
1132 read1 => 'Spiacente, non ci sono nuovi messaggi per te',
1133 read2 => 'Messaggio $_[0] non trovato',
1134 read3 => 'Messaggio $_[0] non disponibile',
1135 rec => '$_[0] records',
1136 reg => '$_[0] registrato',
1137 regc => '$_[0] creato e registrato',
1138 reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)',
1139 regun => '$_[0] deregistrato',
1140 route => '$_[0] su $_[1] via $_[2]',
1141 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
1142 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
1143 sat3 => 'Sintassi: SH/SAT <nome> [<ore> <intervallo>]',
1144 sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-',
1145 sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio',
1146 satnf => 'Satellite $_[0] sconosciuto',
1148 sethop1 => 'sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>',
1149 sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]',
1150 sethop3 => 'Nessun salto impostato per $_[0]',
1151 shutting => '$main::mycall si sta arrestando...',
1152 sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm',
1153 snode1 => 'Nodo Nominativo Ordine Versione',
1154 snode2 => '$_[0] $_[1] $_[2]',
1155 snode3 => '$_[0] Nominativo sconosciuto',
1156 sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm',
1157 sorry => 'Spiacente',
1158 spf1 => 'spoof: sto creando il nuovo utente $_[0]',
1159 stathf => 'Statistiche HF DX Spot, ultimi 31 giorni',
1160 stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]',
1161 statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni',
1162 statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]',
1163 statdx => 'Totale DX Spots degli ultimi 31 giorni',
1164 sun => 'Località gg/mm/aaaa Alba Tramonto',
1165 sun_with_azel => 'Località
1166 gg/mm/aaaa Alba Tramonto Azim Elev',
1168 suser1 => 'sintassi: nominatio campo_utente valore',
1169 suser2 => 'Utente $_[0] non trovato',
1170 suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'',
1171 suser4 => 'Il campo utente \'$_[0]\' non esiste',
1172 time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]',
1173 time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)',
1174 time3 => '$_[0] $_[1]',
1175 talks => 'Talk abilitato per $_[0]',
1176 talku => 'Talk disabilitato per $_[0]',
1177 talkend => 'Chiude il la conversazione con te',
1178 talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando',
1179 talknh => 'Spiaente $_[0] non e\' collegato al momento',
1180 talkprompt => 'Talk ($_[0])>',
1181 talkstart => 'Inizia una conversazione con te',
1182 unsethop1 => 'sintassi: unset/hops <nominativo> ann|spots|wwv|wcy',
1183 unsethop2 => 'salti eliminati su $_[1] per $_[0]',
1184 usernf => '*** Record utente per $_[0] non trovato ***',
1185 wcy1 => '$_[0] manca o e\' fuori limite',
1186 wcy2 => 'WCY duplicato',
1187 wwv1 => '$_[0] manca o e\' fuori limite',
1188 wwv2 => 'WWV duplicato',
1189 wwvs => 'WWV abilitati per $_[0]',
1190 wwvu => 'WWV disabilitati per $_[0]',
1191 wxs => 'WX abilitati per $_[0]',
1192 wxu => 'WX disabilitati per $_[0]',
projects / spider.git / blob