3 # this file contains the system messages. Don't forget to reload them
4 # if you change them (load/messages)
13 addr => 'Address set to: $_[0]',
14 already => '$_[0] already connnected',
15 anns => 'Announces enabled for $_[0]',
16 annu => 'Announces disabled for $_[0]',
17 annts => 'AnnTalk enabled for $_[0]',
18 anntu => 'AnnTalk disabled for $_[0]',
19 badnode1 => '$_[0] is now a bad node',
20 badnode2 => '$_[0] is now a good node',
21 badnode3 => 'List of Bad Nodes:-',
22 bbse1 => 'Please enter your BBS address,, set/bbs <your bbs address>',
23 bbs => 'Your BBS Address is now \"$_[0]\"',
24 beepoff => 'Beeps are now off',
25 beepon => 'Beeps are now on',
26 call1 => 'Callsign lookup via $_[0]:',
27 conother => 'Sorry $_[0] you are connected to me on another port',
28 concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])',
29 conscript => 'no connect script called \"$_[0]\" found in $main::root/connect',
30 confail => 'connection to $_[0] failed ($_[1])',
31 constart => 'connection to $_[0] started',
32 deluser => 'User $_[0] has been deleted',
33 db1 => 'This database is hosted at $_[0]',
34 db2 => 'Sorry, but key: $_[0] was not found in $_[1]',
35 db3 => 'Sorry, database $_[0] doesn\'t exist here',
36 db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online',
37 db5 => 'Accessing remote database on $_[0]...standby...',
38 db6 => 'Database $_[0] already exists, delete it first',
39 db7 => 'Database $_[0] created for remote node $_[1]',
40 db8 => 'Database $_[0] created locally',
41 db9 => 'Database $_[0] removed',
42 db10 => '$_[0] records imported into $_[1]',
43 db11 => 'Sending your request(s) to $_[0], please stand by...',
44 dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw',
45 dir1 => 'No messages found',
46 disc1 => 'Disconnected by $_[0]',
47 disc2 => 'Channel $_[0] disconnected',
48 disc3 => 'No Channel, but connection $_[0] disconnected',
49 disc4 => 'No Channel or connection but orphan $_[0] disconnected',
51 dup => 'Sorry, this is a duplicate',
52 dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments',
53 dx2 => 'Need a callsign; usage: DX [BY call] freq call comments',
54 dx3 => 'The callsign or frequency is invalid',
55 dxcqs => 'DX CQ Zones enabled for $_[0]',
56 dxcqu => 'DX CQ Zones disabled for $_[0]',
57 dxitus => 'DX ITU Zones enabled for $_[0]',
58 dxituu => 'DX ITU Zones disabled for $_[0]',
59 dxs => 'DX Spots enabled for $_[0]',
60 dxu => 'DX Spots disabled for $_[0]',
61 e1 => 'Invalid command',
63 e3 => '$_[0]: $_[1] not found',
64 e4 => 'Need at least a prefix or callsign',
66 e6 => '*** No station specified ***',
67 e7 => 'callsign $_[0] not visible on the cluster',
68 e8 => 'Need a callsign and some text',
69 e9 => 'Need at least some text',
70 e10 => '$_[0] not connected locally',
71 e11 => 'Can\'t use $main:mycall as target',
72 e12 => 'Need a node callsign',
73 e13 => '$_[0] is not a node',
74 e14 => 'First argument must be numeric and > 0',
75 e15 => 'invalid qualifier \"$_[0]\"',
76 e16 => 'File \"$_[0]\" exists',
77 e17 => 'Please don\'t use the words: @_ on here',
78 e18 => 'Cannot connect to $_[0] ($!)',
79 e19 => 'Invalid character in line',
80 e20 => 'token $_[0] not recognised',
81 e21 => '$_[0] not numeric',
82 e22 => '$_[0] not a callsign',
83 e23 => '$_[0] not a range (eg 0/30000)',
84 e24 => 'Sorry, Internet access is not enabled',
85 e25 => 'Sorry the value must be between $_[0] and $_[1]',
86 e26 => 'Too many concurrent errors, you are being disconnected',
87 e27 => '$_[0] not a numeric or a callsign prefix',
88 e28 => 'Sorry, you need to be registered (SP $main::myalias to register)',
89 e29 => 'Need a password',
90 e30 => 'Cannot Open $_[0] $!',
91 e31 => '$_[0] is not a user',
92 e32 => 'Need a passphrase',
93 e33 => '$_[0] is not a number of days or a valid date',
94 e34 => 'Need a GROUP and some text',
95 e35 => 'You are not a member of $_[0], join $_[0]',
97 echoon => 'Echoing enabled',
98 echooff => 'Echoing disabled',
99 echow => '*Echoing is currently disabled, set/echo to enable',
100 emaile1 => 'Please enter your email address, set/email <your e-mail address>',
101 emaila => 'Your E-Mail Address is now \"$_[0]\"',
102 email => 'E-mail address set to: $_[0]',
103 export1 => 'usage: export <msgno> <filename>',
104 export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])',
105 export3 => '$_[2 ] exported msg $_[0] to $_[1]',
106 filter1 => 'Filter $_[0] updated for $_[1]',
107 filter2 => 'Unknown filter keyword $_[0]',
108 filter3 => 'No filters defined for $_[0]',
109 filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]',
110 filter5 => 'need some filter commands...',
111 filter6 => '$_[0]$_[1] Filter for $[2] not found',
112 grids => 'DX Grid enabled for $_[0]',
113 gridu => 'DX Grid disabled for $_[0]',
114 illcall => 'Sorry, $_[0] is an invalid callsign',
115 hasha => '$_[0] already exists in $_[1]',
116 hashb => '$_[0] added to $_[1]',
117 hashc => '$_[0] removed from $_[1]',
118 hashd => '$_[0] not in $_[1]',
119 hashe => '$_[0] set on $_[1]',
120 helpe1 => 'Help system unavailable, tell sysop',
121 helpe2 => 'No help available on $_[0]',
122 heres => 'Here set on $_[0]',
123 heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra',
124 hereu => 'Here unset on $_[0]',
125 homebbs => 'Home BBS set to: $_[0]',
126 homenode => 'Home Node set to: $_[0]',
127 hnodee1 => 'Please enter your Home Node, set/homenode <your home DX Cluster>',
128 hnodee2 => 'Failed to set homenode on $_[0]',
129 hnode => 'Your Homenode is now \"$_[0]\"',
130 init1 => 'sent initialisation message to $_[0]',
131 iso => '$_[0] Isolated',
132 isou => '$_[0] UnIsolated',
133 isoc => '$_[0] created and Isolated',
134 isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first',
135 isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first',
136 isow => '$_[0] is isolated; unset/isolate $_[0] first',
137 join => 'joining group $_[0]',
138 l1 => 'Sorry $_[0], you are already logged on on another channel',
139 l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
140 lang => 'Language is now English',
141 lange1 => 'set/language <lang> where <lang> is one of ($_[0])',
142 lange2 => 'failed to set language on $_[0]',
143 leave => 'leaving group $_[0]',
144 lh1 => '$main::data/hop_table.pl doesn\'t exist',
145 loce1 => 'Please enter your location,, set/location <latitude longitude>',
146 loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)',
147 loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]',
148 loc => 'Your Lat/Long is now \"$_[0]\"',
149 lockout => '$_[0] Locked out',
150 lockoutc => '$_[0] Created and Locked out',
151 lockoutun => '$_[0] Unlocked',
152 lockoutuse => 'usage: sh/lockout <call>|ALL',
153 loginu => 'User $_[0] has logged in',
154 logoutu => 'User $_[0] has logged out',
155 loginn => 'Node $_[0] has logged in',
156 logoutn => 'Node $_[0] has logged out',
157 m1 => 'Enter Subject (30 characters):',
158 m2 => 'Copy of msg $_[0] sent to $_[1]',
159 m3 => 'Sorry, $_[0] is an unacceptable TO address',
160 m4 => 'Sorry, can\'t access message $_[0]',
161 m5 => 'Sorry, I need a message number',
162 m6 => 'Reply to: $_[0]',
163 m7 => 'Subject : $_[0]',
164 m8 => 'Enter Message /EX to send or /ABORT to exit',
165 m9 => 'New mail has arrived for you',
166 m10 => 'Message Aborted',
167 m11 => 'Message no $_[0] saved and directed to $_[1]',
168 m12 => 'Message no $_[0] deleted',
169 m13 => 'Message no $_[0] missing',
170 m14 => 'Message no $_[0] marked as sent to $_[1]',
171 m15 => 'Message no $_[0] unmarked as sent to $_[1]',
172 m16 => 'Need a Message number',
173 m17 => 'Sorry, cannot send messages in $_[0] mode',
174 m18 => 'Sorry, message $_[0] is currently set to KEEP',
175 msg1 => 'Bulletin Messages Queued',
176 msg2 => 'Private Messages Queued',
177 msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]',
178 msgu => 'usage: msg <cmd> <msgno> data...',
179 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
180 moon => 'Location dd/mm/yyyy Rise Set',
181 moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
182 mond => 'Monitoring Disabled',
183 mone => 'Monitoring Enabled',
184 namee1 => 'Please enter your name, set/name <your name>',
185 namee2 => 'Can\'t find user $_[0]!',
186 name => 'Your name is now \"$_[0]\"',
187 nodea => '$_[0] set as AK1A style Node',
188 nodeac => '$_[0] created as AK1A style Node',
189 nodeb => '$_[0] set as BBS',
190 nodebc => '$_[0] created as BBS',
191 nodec => '$_[0] set as CLX style Node',
192 nodecc => '$_[0] created as CLX style Node',
193 noder => '$_[0] set as AR-Cluster style Node',
194 noderc => '$_[0] created as AR-Cluster style Node',
195 nodes => '$_[0] set as DXSpider style Node',
196 nodesc => '$_[0] created as DXSpider style Node',
197 nodex => '$_[0] set as DXNET style Node',
198 nodexc => '$_[0] created as DXNET style Node',
199 nodeu => '$_[0] set back as a User',
200 nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line',
201 notdone => 'NOT Done',
202 nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later',
203 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
204 ok => 'Operation successful',
205 outconn => 'Outstanding connect to $_[0]',
206 page => 'Press Enter to continue, A to abort ($_[0] lines) >',
207 pagelth => 'Page Length is now $_[0]',
208 passerr => 'Please use: SET/PASS <password> <callsign>',
209 passphrase => 'Passphrase set or changed for $_[0]',
210 passphraseu => 'Passphrase removed for $_[0]',
211 password => 'Password set or changed for $_[0]',
212 passwordu => 'Password removed for $_[0]',
213 pc90s => 'PC90 enabled for $_[0]',
214 pc90u => 'PC90 disabled $_[0]',
215 pingo => 'Ping Started to $_[0]',
216 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
217 pinge1 => 'Cannot ping yourself!',
218 pingint => 'Ping interval on $_[0] set to $_[1] secs',
219 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]',
220 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
221 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
222 prs => 'Prompt now set to \"$_[0]\"',
223 pru => 'Prompt now set back to default',
224 priv => 'Privilege level changed on $_[0]',
225 prx => '$main::mycall >',
226 pw0 => 'Enter old password: ',
227 pw1 => 'Enter new password: ',
228 pw2 => 'Re-enter new password: ',
229 pw3 => 'Password changed',
230 pw4 => 'Passwords differ, password NOT changed',
231 qll => 'Please enter your location with set/location or set/qra',
232 qthe1 => 'Please enter your QTH, set/qth <your qth>',
233 qth => 'Your QTH is now \"$_[0]\"',
234 qrae1 => 'Please enter your QRA locator, set/qra <qra locator> (eg set/qra JO02LQ)',
235 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
236 qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)',
237 qra => 'Your QRA Locator is now \"$_[0]\"',
238 qsl1 => 'Call Manager Times Last Time Seen De',
239 rcmdo => 'RCMD \"$_[0]\" sent to $_[1]',
240 read1 => 'Sorry, no new messages for you',
241 read2 => 'Msg $_[0] not found',
242 read3 => 'Msg $_[0] not available',
243 rec => '$_[0] records',
244 reg => '$_[0] registered',
245 regc => '$_[0] created and registered',
246 reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)',
247 regun => '$_[0] unregistered',
248 route => '$_[0] on $_[1] via $_[2]',
249 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
250 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
251 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
252 sat4 => 'Satellites available/Age of Keps (days):-',
253 sat5 => 'need nnnnn.AMSAT in subject to load keps from this message',
254 satnf => 'Satellite $_[0] unknown',
256 set => '$_[0] enabled for $_[1]',
257 sethop1 => 'usage: set/hops <call> ann|spots|wwv|wcy <no of hops>',
258 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
259 sethop3 => 'No hops set for $_[0]',
260 shu => '\"SHU\" is not enough! you need to type at least \"SHUT\" to shutdown the node',
261 shutting => '$main::mycall shutting down...',
262 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
263 snode1 => 'Node Call Sort Version',
264 snode2 => '$_[0] $_[1] $_[2]',
265 snode3 => '$_[0] Unknown Call',
266 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
268 spf1 => 'spoof: creating new user $_[0]',
269 stathf => 'HF DX Spot Stats, last $_[1] days from $_[0]',
270 stathft => 'HF DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]',
271 statvhf => 'VHF+ DX Spot Stats, last $_[1] days from $_[0]',
272 statvhft => 'VHF+ DX Spot Stats, last $_[2] days from $_[1] for DXCC $_[0]',
273 statdx => 'Total DX Spots for $_[1] days from $_[0]',
274 storable => 'Please load the Storable module from CPAN',
275 sun => 'Location dd/mm/yyyy Rise Set',
276 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
277 susdb1 => 'usage: callsign state city',
278 susdb2 => 'USDB $_[0] was $_[1], $_[2]',
279 susdb3 => 'USDB $_[0] now $_[1], $_[2]',
280 susdb4 => 'USDB $_[0] deleted',
281 suser1 => 'usage: callsign user_field_name value',
282 suser2 => 'User $_[0] not found',
283 suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'',
284 suser4 => 'User field name \'$_[0]\' doesn\'t exist',
285 time1 => 'Local Time: $_[0] $_[1], UTC $_[2]',
286 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)',
287 time3 => '$_[0] $_[1]',
288 talks => 'Talk enabled for $_[0]',
289 talku => 'Talk disabled for $_[0]',
290 talkend => 'Finished talking to you',
291 talkinst => 'Entering Talkmode, /EX to end, /<cmd> to run a command',
292 talknh => 'Sorry $_[0] is not online at the moment',
293 talkprompt => 'Talk ($_[0])>',
294 talkstart => 'Starting talking to you',
295 unset => '$_[0] disabled for $_[1]',
296 unsethop1 => 'usage: unset/hops <call> ann|spots|wwv|wcy',
297 unsethop2 => 'hops unset on $_[1] for $_[0]',
298 usernf => '*** User record for $_[0] not found ***',
299 usstates => 'US State display enabled for $_[0]',
300 usstateu => 'US State display disabled for $_[0]',
301 wcy1 => '$_[0] is missing or out of range',
302 wcy2 => 'Duplicate WCY',
303 wcys => 'WCY enabled for $_[0]',
304 wcyu => 'WCY disabled for $_[0]',
305 wpc16s => 'Allow PC16 from $_[0] enabled',
306 wpc16u => 'Allow PC16 from $_[0] disabled',
307 wpc19s => 'Route PC19 for $_[0] enabled',
308 wpc19u => 'Route PC19 for $_[0] disabled',
309 wwv1 => '$_[0] is missing or out of range',
310 wwv2 => 'Duplicate WWV',
311 wwvs => 'WWV enabled for $_[0]',
312 wwvu => 'WWV disabled $_[0]',
313 wxs => 'WX enabled for $_[0]',
314 wxu => 'WX disabled for $_[0]',
317 addr => 'Addres gezet op: $_[0]',
318 already => '$_[0] reeds geconnect',
319 anns => 'Announce berichten AAN gezet voor $_[0]',
320 annu => 'Announce berichten UIT gezet voor $_[0]',
321 bbse1 => 'Geef je home bbs (mailbox),, set/bbs <home mailbox>',
322 bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"',
323 beepoff => 'De beep staat nu UIT',
324 beepon => 'De beep staat nu AAN',
325 conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort',
326 concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect',
327 conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect',
328 confail => 'Verbinding met $_[0] mislukt ($_[1])',
329 constart => 'Verbinding met $_[0] gestart',
330 disc1 => 'Gedisconnect door $_[0]',
331 disc2 => '$_[0] gedisconnect',
332 dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)',
333 dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]',
334 dxs => 'DX Spots worden WEL doorgegeven aan $_[0]',
335 dxu => 'DX Spots worden NIET doorgegeven aan $_[0]',
336 e1 => 'Ongeldige opdracht',
338 e3 => '$_[0]: $_[1] niet gevonden',
339 e4 => 'Minimaal een prefix of een call nodig',
340 e5 => 'Niet toegestaan',
341 e6 => '*** Geen station gespecifiseerd ***',
342 e7 => 'Callsign $_[0] is niet zichtbaar op het cluster',
343 e8 => 'Ik heb een call en tekst nodig',
344 e9 => 'Ik heb wel tekst nodig voor een announce!',
345 e10 => '$_[0] is niet lokaal verbonden',
346 e12 => 'Ik heb een node call nodig',
347 e13 => '$_[0] is geen node',
348 emaile1 => 'Geef uw E-mail addres, set/email <uw e-mail addres>',
349 emaila => 'Uw E-Mail addres is nu \"$_[0]\"',
350 email => 'E-mail addres gezet op: $_[0]',
351 helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop',
352 helpe2 => 'Geen help beschikbaar over \"$_[0]\"',
353 heres => 'Aanwezigheid AAN gezet voor $_[0]',
354 heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra',
355 hereu => 'Aanwezigheid UIT gezet voor $_[0]',
356 homebbs => 'Uw Home mailbox is nu $_[0]',
357 homenode => 'Uw (Home) DX-Cluster is : $_[0]',
358 hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode <DX-cluster>',
359 hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"',
360 iso => '$_[0] is geisoleerd (Isolated)',
361 isou => '$_[0] is niet meer geisoleerd (UnIsolated)',
362 isoc => '$_[0] gecreerd en geisoleerd (Isolated)',
363 l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt',
364 l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version',
365 lang => 'De taal zijn nu Nederlandse',
366 lh1 => '$main::data/hop_table.pl bestaat niet',
367 loce1 => 'Geef uw coordinaten met, set/location <latitude longitude>',
368 loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)',
369 loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"',
370 lockout => '$_[0] heeft geen toegang meer (Locked out)',
371 lockoutun => '$_[0] heeft wederom toegang (Unlocked)',
372 m2 => '$_[0] Informatie: $_[1]',
373 merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]',
374 msgnew => 'Er is nieuwe post gearriveerd voor u',
375 namee1 => 'Geef aub uw naam met, set/name <uw naam>',
376 namee2 => 'Gebruiker $_[0] niet te vinden!',
377 name => 'Uw naam is gezet op \"$_[0]\"',
378 node => '$_[0] gezet als een AK1A stijl DX-cluster',
379 nodeu => '$_[0] teruggezet naar gebruiker status',
380 nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster',
381 nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is',
382 ok => 'Opdracht succesvol uitgevoerd',
383 page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >',
384 pagelth => 'Paginalengte gezet op ($_[0]) regels',
385 passerr => 'Gebruik: SET/PASS <wachtwoord> <call>',
386 password => 'Wachtwoord gezet of gewijzigd voor $_[0]',
387 pingo => 'Ping gestart naar $_[0]',
388 pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs',
389 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
390 pr2 => '($_[0]) de $main::mycall $_[1] $[2] >',
391 priv => 'Privilege level gewijzigd op $_[0]',
392 prx => '$main::mycall >',
393 qll => 'Geef uw locator met set/location of set/qra',
394 qthe1 => 'Geef uw woonplaats met, set/qth <woonplaats>',
395 qth => 'Uw QTH is nu \"$_[0]\"',
396 qrae1 => 'Geef uw QRA locator, set/qra <qra locator> (vb set/qra JO33FD)',
397 qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS',
398 qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)',
399 qra => 'Uw QRA Locator is nu \"$_[0]\"',
400 rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]',
401 read1 => 'Sorry, geen berichten voor u',
402 read2 => 'Bericht $_[0] niet gevonden',
403 read3 => 'Bericht $_[0] niet beschikbaar',
404 shutting => '$main::mycall gaat QRT...',
405 sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
406 sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm',
407 talks => 'Talk berichten AAN gezet voor $_[0]',
408 talku => 'Talk berichten UIT gezet voor $_[0]',
409 usernf => '*** Gebruiker info van $_[0] niet gevonden ***',
410 wwvs => 'WWV berichten AAN gezet voor $_[0]',
411 wwvu => 'WWV berichten UIT gezet voor $_[0]',
412 wxs => 'WX berichten AAN gezet voor $_[0]',
413 wxu => 'WX berichten UIT gezet voor $_[0]',
418 addr => 'La dirección es ahora: $_[0]',
419 already => '$_[0] ya está conectado',
420 anns => 'Activada la recepción de anuncios para $_[0]',
421 annu => 'Desactivada la recepción de anuncios para $_[0]',
422 annts => 'Modo AnnTalk activado para $_[0]',
423 anntu => 'Modo AnnTalk desactivado para $_[0]',
424 badnode1 => 'No se aceptan spots generados en $_[0], se añade a la lista badnode',
425 badnode2 => 'Se aceptan spots del nodo $_[0], sale de la lista badnode',
426 badnode3 => 'Lista de nodos rechazados:',
427 bbse1 => 'Por favor introduce tu BBS, set/bbs <tu bbs>',
428 bbs => 'Tu BBS es ahora \"$_[0]\"',
429 beepoff => 'Avisos sonoros desactivados',
430 beepon => 'Avisos sonoros activados',
431 call1 => 'Se encontró el indicativo vía $_[0]:',
432 conother => 'Lo siento $_[0] ya estás conectado en otro puerto',
433 concluster => 'Lo siento $_[0] ya estás conectado en otro cluster',
434 conscript => 'No hay ningún script que se llame \"$_[0]\" en $main::root/connect',
435 confail => 'La conexión con $_[0] ha fallado ($_[1])',
436 constart => 'Se inicia la conexión a $_[0]',
437 deluser =>'El usuario $_[0] ha sido borrado de la base de datos',
438 db1 => 'Esta base de datos está en $_[0]',
439 db2 => 'Lo siento, pero no se encontró $_[0] en $_[1]',
440 db3 => 'Lo siento, la base de datos $_[0] no existe aquí',
441 db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible',
442 db5 => 'Accediendo a la base de datos remota $_[0]...espere...',
443 db6 => 'La base de datos $_[0] ya existe, bórrala primero',
444 db7 => 'La base de datos $_[0] creada para el nodo remoto $_[1]',
445 db8 => 'Base de datos $_[0] creada localmente',
446 db9 => 'La base de datos $_[0] ha sido eliminada',
447 db10 => '$_[0] registros importados para la base de datos $_[1]',
448 db11 => 'Tu petición ha sido enviada a $_[0], por favor espera...',
449 dfreq1 => 'La frecuencia no es válida $_[0] ej: 0/30000 o hf o hf/cw',
450 dir1 => 'No hay mensajes nuevos',
451 disc1 => 'Desconectado por $_[0]',
452 disc2 => 'Canal $_[0] desconectado',
453 disc3 => 'No estaba activo el canal, pero la conexión de $_[0] ha sido eliminada',
454 disc4 => 'No existía el canal o la conexión, $_[0] se elimina',
456 dup => 'Lo siento, esto es un duplicado',
457 dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario',
458 dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario',
459 dx3 => 'El indicativo o la frecuencia es incorrecta',
460 dxs => 'Activada la recepción de spots de DX para $_[0]',
461 dxu => 'Desactivada la recepción de spots de DX para $_[0]',
462 e1 => 'Este comando no es válido',
463 e2 => 'Error: $_[0]',
464 e3 => '$_[0]: $_[1] no encontrado',
465 e4 => 'Se necesita, por lo menos, un prefijo o indicativo',
466 e5 => 'No estás autorizado',
467 e6 => '*** No se ha especificado una estación ***',
468 e7 => 'El indicativo $_[0] no es visible en el cluster',
469 e8 => 'Se necesita un indicativo y algún texto',
470 e9 => 'Se necesita al menos algún texto',
471 e10 => '$_[0] no se encuentra conectado',
472 e11 => 'No puedes usar tu propio $main:mycall como destino',
473 e12 => 'Se necesita el indicativo del nodo',
474 e13 => '$_[0] no es un nodo',
475 e14 => 'El primer argumento debe de ser numérico y > 0',
476 e15 => 'calificador no válido \"$_[0]\"',
477 e16 => 'El fichero \"$_[0]\" ya existe',
478 e17 => 'Por favor no uses la palabra: @_ aquí',
479 e18 => 'No se puede conectar con $_[0] ($!)',
480 e19 => 'Carácter no válido en la línea',
481 e20 => 'Símbolo $_[0] no reconocido',
482 e21 => '$_[0] no es numérico',
483 e22 => '$_[0] no es un indicativo',
484 e23 => '$_[0] fuera de rango (ej: 0/30000)',
485 e24 => 'Lo siento, el acceso a internet no está habilitado',
486 e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]',
487 e26 => 'Demasiados errores, serás desconectado',
488 e27 => '$_[0] no es un numero o un prefijo',
489 e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)',
490 e29 => 'Necesitas password',
491 e30 => 'No se puede abrir $_[0] $!',
492 e31 => '$_[0] no es un usuario',
493 e32 => 'Se necesita una frase de contraseña',
495 echoon => 'Eco local activado',
496 echooff => 'Eco local desactivado',
497 echow => '*Eco local desactivado, set/echo para activarlo',
498 emaile1 => 'Por favor introduce tu E-mail, set/email <tu E-mail>',
499 emaila => 'Tu dirección E-Mail es ahora \"$_[0]\"',
500 email => 'La dirección E-mail es ahora: $_[0]',
501 export1 => 'uso: export <numero_mensaje> <nombre_fichero>',
502 export2 => '$_[3] hubo un error exportando mensaje $_[0] a $_[1] ($_[2])',
503 export3 => '$_[2 ] exportando mensaje $_[0] a $_[1]',
504 filter1 => 'Filtro $_[0] actualizado para $_[1]',
505 filter2 => 'Es necesario un valor para $_[0]',
506 filter3 => 'No hay filtros definidos para $_[0]',
507 filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]',
508 filter5 => 'Se necesitan algunos comandos para el filtro...',
509 filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado',
510 grids => 'Activada recepción de locators en spot (DX Grid) para $_[0]',
511 gridu => 'Desactivada recepción de locators en spot (DX Grid) para $_[0]',
512 illcall => 'Lo siento, $_[0] no es un indicativo válido',
513 hasha => '$_[0] ya existe en $_[1]',
514 hashb => '$_[0] añadido a $_[1]',
515 hashc => '$_[0] eliminado desde $_[1]',
516 hashd => '$_[0] no en $_[1]',
517 hashe => '$_[0] activado $_[1]',
518 helpe1 => 'La ayuda no está disponible, comunícaselo al sysop',
519 helpe2 => 'No hay ayuda disponible para $_[0]',
520 heres => 'Se informa a la red: $_[0] está presente',
521 heade1 => 'Usando las coord. de $main::mycall, se recomienda usar set/location o set/qra',
522 hereu => 'Se informa a la red: $_[0] está ausente',
523 homebbs => 'Tu BBS es ahora: $_[0]',
524 homenode => 'Tu cluster habitual es ahora: $_[0]',
525 hnodee1 => 'Por favor introduce tu cluster habitual, set/homenode <Tu DX cluster>',
526 hnodee2 => 'Error al definir homenode en $_[0]',
527 hnode => 'Tu nodo habitual es ahora \"$_[0]\"',
528 init1 => 'Enviado mensaje de inicialización a $_[0]',
529 iso => 'El cluster $_[0] se pone en modo pasivo (Aislado)',
530 isou => 'El cluster $_[0] se pone en modo activo',
531 isoc => '$_[0] creado y definido como pasivo (Aislado)',
532 isoari => 'Existe un filtro de entrada de rutas para $_[0]; clear/route input $_[0] primero',
533 isoaro => 'Existe un filtro de rutas hacia $_[0]; clear/route $_[0] primero',
534 isow => '$_[0] está en modo aislado; unset/isolate $_[0] primero',
535 l1 => 'Lo siento $_[0], ya estás conectado en otro canal',
536 l2 => 'Hola $_[0], esta es $main::mycall en $main::myqth usando DXSpider V$main::version',
537 lang => 'El idioma es ahora Español',
538 lange1 => 'set/language <idioma> donde <idioma> es uno entre ($_[0])',
539 lange2 => 'Error al seleccionar idioma en $_[0]',
540 lh1 => '$main::data/hop_table.pl no existe',
541 loce1 => 'Por favor introduce tu posición, set/location <latitud longitud>',
542 loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (ej: 52 20 N 0 16E)',
543 loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]',
544 loc => 'Tu Lat/Long es ahora \"$_[0]\"',
545 lockout => '$_[0] Excluido del sistema',
546 lockoutc => '$_[0] Creado y excluido del sistema',
547 lockoutun => '$_[0] autorizado para conectar',
548 lockoutuse => 'Uso: sh/lockout <indicativo|prefijo>|ALL',
549 loginu => '$_[0] conecta',
550 logoutu => '$_[0] se desconecta',
551 loginn => '$_[0] conecta',
552 logoutn => '$_[0] se desconecta',
553 m1 => 'Introduce el título (máx. 30 caractéres):',
555 m2 => 'Copia del mensaje $_[0] enviada a $_[1]',
556 m3 => 'Lo siento, $_[0] no se aceptan mensajes a ese tópico',
557 m4 => 'Lo siento, no se puede acceder al mensaje $_[0]',
558 m5 => 'Lo siento, se necesita un número de mensaje',
559 m6 => 'Reenviado a: $_[0]',
560 m7 => 'Título : $_[0]',
561 m8 => 'Introduce mensaje. /EX para terminar o /ABORT para interrumpir',
562 m9 => 'Hay correo nuevo para ti. Bórralo una vez leído.',
563 m10 => 'mensaje interrumpido',
564 m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]',
565 m12 => 'mensaje nr $_[0] borrado',
566 m13 => 'mensaje nr $_[0] no encontrado',
567 m14 => 'mensaje nr $_[0] marcado para ser enviado a $_[1]',
568 m15 => 'mensaje nr $_[0] no se enviará a $_[1]',
569 m16 => 'Se necesita un número de mensaje',
570 m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo',
571 msg1 => 'Cola de mensajes tipo Boletín',
572 msg2 => 'Cola de mensajes tipo Privados',
573 msg3 => 'Msg $_[0]: $_[1] cambiado de $_[2] a $_[3]',
574 msgu => 'uso: msg <cmd> <msgno> data...',
575 merge1 => 'Petición de envío de $_[1] spots y $_[2] WWV enviada a $_[0]',
576 moon => 'QTH dd/mm/yyyy Salida Puesta',
577 moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
578 mond => 'Activado modo monitor',
579 mone => 'Desactivado modo monitor',
580 namee1 => 'Por favor, introduce tu nombre set/name <tu nombre>',
581 namee2 => 'No se encuentra el usuario $_[0]!',
582 name => 'Tu nombre es \"$_[0]\"',
583 nodea => '$_[0] definido como nodo AK1A ',
584 nodeac => '$_[0] creado como nodo AK1A ',
585 nodeb => '$_[0] definido como BBS',
586 nodebc => '$_[0] creado como BBS',
587 nodec => '$_[0] definido como nodo CLX ',
588 nodecc => '$_[0] creado como nodo CLX ',
589 noder => '$_[0] definido como nodo AR-Cluster ',
590 noderc => '$_[0] creado como nodo AR-Cluster ',
591 nodes => '$_[0] definido como nodo DXSpider ',
592 nodesc => '$_[0] creado como nodo DXSpider ',
593 nodex => '$_[0] definido como nodo DXNET ',
594 nodexc => '$_[0] creado como nodo DXNET ',
595 nodeu => '$_[0] es ahora un usuario',
596 nodee1 => 'No puedes usar este comando mientras tu objetivo ($_[0]) se encuentra',
597 notdone => 'No se pudo hacer',
598 nothere => 'Lo siento, pero $_[0] no está aquí ahora, inténtalo mas tarde',
599 obscount => 'El parámetro Ping obsolescence count para $_[0] ajustado a $_[1]',
600 ok => 'Operación realizada',
601 outconn => 'Iniciando conexión con $_[0]',
602 page => 'Teclea Enter para continuar, A para abortar (Quedan $_[0] líneas) >',
603 pagelth => 'La longitud de las páginas es ahora $_[0]',
604 passerr => 'Por favor usa: SET/PASS <password> <indicativo>',
605 passphrase => 'Passphrase definida o cambiada para $_[0]',
606 passphraseu => 'Passphrase borrada para $_[0]',
608 password => 'El Password ha sido definido o cambiado para $_[0]',
609 passwordu => 'Contraseña borrada para $_[0]',
610 pc90s => 'PC90 activado para $_[0]',
611 pc90u => 'PC90 desactivado para $_[0]',
612 pingo => 'Iniciado el ping a $_[0]',
613 pingi => 'Ping devuelto por $_[0] $_[1] (Ave $_[2]) segundos',
614 pinge1 => 'No puedes enviarte un ping a ti mismo!',
615 pingint => 'Intervalo de ping para $_[0] ajustado a $_[1] segundos',
616 'pos' => 'Desde el indicativo: $_[0] Lat: $_[1] Long: $_[2]',
617 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
618 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
619 prs => 'El Prompt ha sido cambiado a \"$_[0]\"',
620 pru => 'El Prompt vuelve a ser el normal por defecto',
621 priv => 'Nivel de privilegios modificado para $_[0]',
622 prx => '$main::mycall >',
623 pw0 => 'Escribe el password antiguo: ',
624 pw1 => 'Escribe el nuevo password: ',
625 pw2 => 'Confirma el nuevo password: ',
626 pw3 => 'El Password ha sido cambiado',
627 pw4 => 'Los passwords no coinciden, NO se han cambiado',
628 qll => 'Por favor introduce tu locator con set/location o set/qra',
629 qthe1 => 'Por favor introduce tu QTH, set/qth <tu qth>',
630 qth => 'Tu QTH es ahora \"$_[0]\"',
631 qrae1 => 'Por favor introduce tu QRA locator, set/qra <qra locator> (ej: set/qra JO02LQ)',
632 qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS',
633 qrae2 => 'No se reconoce \"$_[0]\" como un QRA locator ( ej JO02LQ)',
634 qra => 'Tu QRA Locator es ahora \"$_[0]\"',
635 rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]',
636 read1 => 'Lo siento, no hay mensajes nuevos para ti',
637 read2 => 'Mensaje $_[0] no encontrado',
638 read3 => 'Mensaje $_[0] no disponible',
639 rec => '$_[0] registros',
640 reg => '$_[0] registrado',
641 regc => '$_[0] creado y registrado',
642 reginac => 'El registro no está activo (set/var \$main::regreq = 1 para activarlo)',
643 regun => 'El usuario $_[0] no esta registrado',
644 route => '$_[0] en $_[1] vía $_[2]',
645 sat1 => 'Tabla de seguimiento $_[0] para las próximas $_[1] horas cada $_[2] minutos',
646 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
647 sat3 => 'Sintaxis: SH/SAT <nombre> [<horas> <intervalo>]',
648 sat4 => 'Satélites disponibles:',
649 sat5 => 'Es necesario el título nnnn.AMSAT para actualizar datos keps. desde un mensaje',
650 satnf => 'Satélite $_[0] desconocido',
652 sethop1 => 'uso: set/hops <indicativo> ann|spots|wwv|wcy <nr de hops>',
653 sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]',
654 sethop3 => 'No hay hops definidos para $_[0]',
655 shu => '\"SHU\" No es suficiente! Es necesario como mínimo escribir \"SHUT\" para apagar el cluster',
656 shutting => '$main::mycall shutting down...',
657 sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm',
658 snode1 => 'Nodo Call Sort Versión',
659 snode2 => '$_[0] $_[1] $_[2]',
660 snode3 => '$_[0] Indicativo desconocido',
661 sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm',
662 sorry => 'Lo siento',
663 spf1 => 'spoof: creando nuevo usuario $_[0]',
664 stathf => 'Estadísticas de spots en HF de los últimos 31 días',
665 stathft => 'Estadísticas de spots en HF de los últimos 31 días para DXCC $_[0]',
666 statvhf => 'VHF + DX Spot Stats, últimos 31 días',
667 statvhft => 'VHF + DX Spot Stats, últimos 31 días para DXCC $_[0]',
668 statdx => 'Total de Spots de DX en los últimos 31 días',
669 sun => 'QTH dd/mm/yyyy Salida Puesta',
670 sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev',
671 susdb1 => 'uso: indicativo estado ciudad',
672 susdb2 => 'USDB $_[0] era $_[1], $_[2]',
673 susdb3 => 'USDB $_[0] es ahora $_[1], $_[2]',
674 susdb4 => 'USDB $_[0] borrado',
675 suser1 => 'uso: indicativo user_field_name valor',
676 suser2 => 'Usuario $_[0] no encontrado',
677 suser3 => 'User field \'$_[0]\' era \'$_[1]\' ahora es \'$_[2]\'',
678 suser4 => 'User field name \'$_[0]\' no existe',
679 time1 => 'Horario local: $_[0] $_[1], UTC $_[2]',
680 time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)',
681 time3 => '$_[0] $_[1]',
682 talks => 'Recepción de mensajes Talk activado para $_[0]',
683 talku => 'Recepción de mensajes Talk desactivado para $_[0]',
684 talkend => 'Finalizado modo talk contigo',
685 talkinst => 'Entrando en modo talk, /EX para salir, /<cmd> para ejecutar un comando',
686 talknh => 'Lo siento $_[0] no está conectado en este momento',
687 talkprompt => 'Talk ($_[0])>',
688 talkstart => 'Iniciando modo talk contigo',
689 unset => '$_[0] deshabilitado para $_[1]',
690 unsethop1 => 'uso: unset/hops <call> ann|spots|wwv|wcy',
691 unsethop2 => 'Borrados los hops para $_[1] en $_[0]',
692 usernf => '*** Registro de usuario $_[0] no encontrado ***',
693 wcy1 => '$_[0] falta o esta fuera de rango',
694 wcy2 => 'WCY Duplicado',
695 wcys => 'Activada recepción de anuncios WCY para $_[0]',
696 wcyu => 'Desactivada recepción de anuncios WWV para $_[0]',
697 wwv1 => '$_[0] falta o esta fuera de rango',
698 wwv2 => 'WWV Duplicado',
699 wwvs => 'Activada recepción de anuncios WWV para $_[0]',
700 wwvu => 'Desactivada recepción de anuncios WWV para $_[0]',
701 wxs => 'Activada recepción de anuncios WX para $_[0]',
702 wxu => 'Desactivada recepción de anuncios WX para $_[0]',
705 addr => 'Adresse gesetzt auf: $_[0]',
706 already => '$_[0] bereits connnected',
707 anns => 'Announce flag gesetzt auf $_[0]',
708 annu => 'Announce flag zurueckgesetzt auf $_[0]',
709 annts => 'AnnTalk flag gesetzt auf $_[0]',
710 anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]',
711 badnode1 => '$_[0] ist nun ein bad node',
712 badnode2 => '$_[0] ist nun ein good node',
713 badnode3 => 'Liste der Bad Nodes:-',
714 bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs <your bbs address>',
715 bbs => 'Deine BBS Adresse ist nun \"$_[0]\"',
716 beepoff => 'Beeps sind nun aus',
717 beepon => 'Beeps sind nun eingeschaltet',
718 call1 => 'Callsign lookup via $_[0]:',
719 conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected',
720 concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])',
721 conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect',
722 confail => 'Verbindung zu $_[0] misslungen ($_[1])',
723 constart => 'Verbindung zu $_[0] gestartet',
724 deluser => 'User $_[0] wurde geloescht',
725 db1 => 'Diese Datenbank ist untergebracht bei $_[0]',
726 db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]',
727 db3 => 'Sorry, Datenbank $_[0] existiert hier nicht',
728 db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online',
729 db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...',
730 db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen',
731 db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]',
732 db8 => 'Datenbank $_[0] lokal angelegt',
733 db9 => 'Datenbank $_[0] entfernt',
734 db10 => '$_[0] Datensaetze importiert in $_[1]',
735 db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...',
736 dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw',
737 dir1 => 'Keine Nachricht gefunden',
738 disc1 => 'Disconnected von $_[0]',
739 disc2 => 'Kanal $_[0] disconnected',
740 disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected',
741 disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected',
743 dup => 'Sorry, dies ist ein Duplikat',
744 dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar',
745 dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar',
746 dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig',
747 dxs => 'DX Spots flag gesetzt auf $_[0]',
748 dxu => 'DX Spots flag zurueckgesetzt auf $_[0]',
749 e1 => 'Ungueltiger Befehl',
750 e2 => 'Fehler: $_[0]',
751 e3 => '$_[0]: $_[1] nicht gefunden',
752 e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen',
753 e5 => 'Nicht erlaubt',
754 e6 => '*** Keine Station angegeben ***',
755 e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster',
756 e8 => 'Brauche ein Rufzeichen und etwas Text',
757 e9 => 'Brauche wenigstens etwas Text',
758 e10 => '$_[0] nicht lokal connected',
759 e11 => 'Kann nicht $main:mein Rufzeichen als Ziel',
760 e12 => 'Brauche ein Node Rufzeichen',
761 e13 => '$_[0] ist kein Node',
762 e14 => 'Erstes Argument muss eine Zahl und > 0 sein',
763 e15 => 'Unguelitges Abfragekriterium \"$_[0]\"',
764 e16 => 'Datei \"$_[0]\" existiert',
765 e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier',
766 e18 => 'Kann nicht verbinden mit $_[0] ($!)',
767 e19 => 'Ungueltiger Character in der Zeile',
768 e20 => 'Kuerzel $_[0] nicht erkannt',
769 e21 => '$_[0] nicht numerisch',
770 e22 => '$_[0] kein Rufzeichen',
771 e23 => '$_[0] kein Bereich (z.B. 0/30000)',
772 e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet',
774 e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein',
775 e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected',
776 e27 => '$_[0] kein numerisches oder Rufzeichen Prefix',
777 e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)',
778 e29 => 'Brauche eine Passwort',
779 echoon => 'Echo enabled',
780 echooff => 'Echo disabled',
781 echow => '*Echo ist im moment disabled, set/echo to enable',
782 emaile1 => 'Bitte email Addresse eingeben, set/email <Deine e-mail Adresse>',
783 emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"',
784 email => 'E-mail Adresse gesetzt auf: $_[0]',
785 export1 => 'Gebrauch: export <msgno> <dateiname>',
786 export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])',
787 export3 => '$_[2 ] exportierte msg $_[0] to $_[1]',
788 filter1 => 'Filter $_[0] upgedated fuer $_[1]',
789 filter2 => 'Unbekanntes Filter Schluesselwort $_[0]',
790 filter3 => 'Keine Filter definiert fuer $_[0]',
791 filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]',
792 filter5 => 'brauche ein paar Filter Kommandos...',
793 filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden',
794 grids => 'DX Grid flag gesetzt auf $_[0]',
795 gridu => 'DX Grid flag zurueckgesetzt auf $_[0]',
796 illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen',
797 hasha => '$_[0] existiert bereits in $_[1]',
798 hashb => '$_[0] zugefuegt zu $_[1]',
799 hashc => '$_[0] entfernt von $_[1]',
800 hashd => '$_[0] nicht in $_[1]',
801 hashe => '$_[0] gesetzt auf $_[1]',
802 helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen',
803 helpe2 => 'Keine Hilfe verfuegbar auf $_[0]',
804 heres => 'Hier gesetzt auf $_[0]',
805 heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra',
806 hereu => 'Here zurueckgesetzt auf $_[0]',
807 homebbs => 'Heimat BBS gesetzt auf: $_[0]',
808 homenode => 'Heimat Node gesetzt auf: $_[0]',
809 hnodee1 => 'Bitte Heimat Node eingeben, set/homenode <dein Heimat DX Cluster>',
810 hnodee2 => 'Heimat Node setzen ist misslungen $_[0]',
811 hnode => 'Dein Heimat Node ist nun \"$_[0]\"',
812 init1 => 'Initialisierungs Nachricht gesendet an $_[0]',
813 iso => '$_[0] Isoliert',
814 isou => '$_[0] UnIsoliert',
815 isoc => '$_[0] erstellt und Isoliert',
816 isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst',
817 isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst',
818 isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst',
819 l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt',
820 l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build',
821 lang => 'Sprache ist jetzt Deutch',
822 lange1 => 'set/language <lang> wobei <lang> ist eine von ($_[0])',
823 lange2 => 'Fehler beim setzen der Sprache auf $_[0]',
824 lh1 => '$main::data/hop_table.pl existiert nicht',
825 loce1 => 'Bitte Deinen Standort eingeben,, set/location <latitude longitude>',
826 loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)',
827 loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]',
828 loc => 'Dein Lat/Long ist nun \"$_[0]\"',
829 lockout => '$_[0] ausgesperrt',
830 lockoutc => '$_[0] erstellt und ausgesperrt',
831 lockoutun => '$_[0] Aussperrung aufgehoben',
832 lockoutuse => 'Gebrauch: sh/lockout <Rufzeichen>|ALL',
833 loginu => 'User $_[0] hat eingeloggt',
834 logoutu => 'User $_[0] hat ausgeloggt',
835 loginn => 'Node $_[0] hat eingeloggt',
836 logoutn => 'Node $_[0] hat ausgeloggt',
837 m1 => 'Subjekt eingeben (30 Zeichen):',
838 m2 => 'Kopie der msg $_[0] gesendet an $_[1]',
839 m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse',
840 m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]',
841 m5 => 'Sorry, ich brauche eine Nachrichten Nummer',
842 m6 => 'Reply to: $_[0]',
843 m7 => 'Subject : $_[0]',
844 m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen',
845 m9 => 'Neue Nachricht(en) fuer Dich',
846 m10 => 'Nachricht abgebrochen',
847 m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]',
848 m12 => 'Nachricht Nr. $_[0] geloescht',
849 m13 => 'Nachricht Nr. $_[0] fehlt',
850 m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]',
851 m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]',
852 m16 => 'Brauche eine Nachrichten Nummer',
853 m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode',
854 msg1 => 'Bulletin Nachrichten aufgeschoben',
855 msg2 => 'Private Nachrichten aufgeschoben',
856 msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]',
857 msgu => 'Gebrauch: msg <cmd> <msgno> data...',
858 merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]',
859 moon => 'Standort dd/mm/yyyy Rise Set',
860 moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev',
861 mond => 'Ueberwachung Disabled',
862 mone => 'Ueberwachung Enabled',
863 namee1 => 'Bitte Deinen Namen eingeben, set/name <dein name>',
864 namee2 => 'Kann User $_[0]nicht finden!',
865 name => 'Dein Name ist jetzt \"$_[0]\"',
866 nodea => '$_[0] gesetzt als AK1A style Node',
867 nodeac => '$_[0] erstellt als AK1A style Node',
868 nodeb => '$_[0] gesetzt als BBS',
869 nodebc => '$_[0] erstellt als BBS',
870 nodec => '$_[0] gesetzt als CLX style Node',
871 nodecc => '$_[0] erstellt als CLX style Node',
872 noder => '$_[0] gesetzt als AR-Cluster style Node',
873 noderc => '$_[0] erstellt als AR-Cluster style Node',
874 nodes => '$_[0] gesetzt als DXSpider style Node',
875 nodesc => '$_[0] erstellt als DXSpider style Node',
876 nodex => '$_[0] gesetzt als DXNET style Node',
877 nodexc => '$_[0] erstellt als DXNET style Node',
878 nodeu => '$_[0] zurueckgesetzt als ein User',
879 nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist',
880 notdone => 'Nicht ausgefuehrt',
881 nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen',
882 obscount => 'Ping obsolescence count on $_[0] set to $_[1]',
883 ok => 'Operation erfolgreich',
884 outconn => 'Outstanding connect to $_[0]',
885 page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >',
886 pagelth => 'Seitenlaenge ist nun $_[0]',
887 passerr => 'Gebrauch: SET/PASS <Passwort> <Rufzeichen>',
888 password => 'Passwort gesetzt oder geaendert fuer $_[0]',
889 passwordu => 'Passwort geloescht fuer $_[0]',
890 pingo => 'Ping Started to $_[0]',
891 pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs',
892 pinge1 => 'Cannot ping yourself!',
893 pingint => 'Ping interval on $_[0] set to $_[1] secs',
894 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]',
895 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
896 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
897 priv => 'Priviligierten Level geaendert auf $_[0]',
898 prx => '$main::mycall >',
899 pw0 => 'Altes Passwort eingeben: ',
900 pw1 => 'Neues Passwort eingeben: ',
901 pw2 => 'Wiederhole neues Passwort: ',
902 pw3 => 'Passwort geaendert',
903 pw4 => 'Passwoerter differieren, Passwort NICHT geaendert',
904 qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra',
905 qthe1 => 'Bitte gib Dein QTH ein mit set/qth <dein qth>',
906 qth => 'Dein QTH ist nun \"$_[0]\"',
907 qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra <qra locator> (z.B. set/qra JO44RK)',
908 qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS',
909 qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)',
910 qra => 'Dein QRA Locator ist nun \"$_[0]\"',
911 rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]',
912 read1 => 'Sorry, keine neuen Nachrichtenfuer Dich',
913 read2 => 'Msg $_[0] nicht gefunden',
914 read3 => 'Msg $_[0] nicht verfuegbar',
915 rec => '$_[0] records',
916 reg => '$_[0] registriert',
917 regc => '$_[0] erstellt und registriert',
918 reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)',
919 regun => '$_[0] unregistriert',
920 route => '$_[0] auf $_[1] via $_[2]',
921 sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins',
922 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
923 sat3 => 'Syntax: SH/SAT <name> [<hours> <interval>]',
924 sat4 => 'Satelliten verfuegbar:-',
925 satnf => 'Satellit $_[0] unbekannt',
927 sethop1 => 'Gebrauch: set/hops <Rufzeichen> ann|spots|wwv|wcy <Anzahl der Hops>',
928 sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]',
929 sethop3 => 'Keine hops gesetzt fuer $_[0]',
930 shutting => '$main::mycall shutting down...',
931 sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern',
932 snode1 => 'Node Call Sort Version',
933 snode2 => '$_[0] $_[1] $_[2]',
934 snode3 => '$_[0] Unbekanntes Rufzeichen',
935 sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern',
937 spf1 => 'spoof: erzeuge neuen User $_[0]',
938 stathf => 'HF DX Spot Stats, letzte 31 Tage',
939 stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
940 statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage',
941 statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]',
942 statdx => 'Total DX Spots letzte 31 Tage',
943 sun => 'Location dd/mm/yyyy Rise Set',
944 sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev',
945 suser1 => 'Gebrauch: Rufzeichen user_field_name value',
946 suser2 => 'User $_[0] nicht gefunden',
947 suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'',
948 suser4 => 'User Feld name \'$_[0]\' existiert nicht',
949 time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]',
950 time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)',
951 time3 => '$_[0] $_[1]',
952 talks => 'Talk flag gesetzt auf $_[0]',
953 talku => 'Talk flag zurueckgesetzt auf $_[0]',
954 talkend => 'Beendet Talk zu Dir',
955 talkinst => 'Talkmode, /EX zum beenden, /<cmd> um ein Kommando auszufuehren',
956 talknh => 'Sorry $_[0] ist im moment nicht online',
957 talkprompt => 'Talk ($_[0])>',
958 talkstart => 'Startet Talkmode zu Dir',
959 usernf => '*** User Satz fuer $_[0] nicht gefunden ***',
960 wwvs => 'WWV flag gesetzt auf $_[0]',
961 wwvu => 'WWV flag zurueckgesetzt auf $_[0]',
962 wxs => 'WX flag gesetzt auf $_[0]',
963 wxu => 'WX flag zurueckgesetzt auf $_[0]',
966 addr => 'Indirizzo impostato a: $_[0]',
967 already => '$_[0] e\' connesso',
968 anns => 'Annunci attivati alle_[0]',
969 annu => 'Annunci disattivati alle $_[0]',
970 annts => 'Talk attivato alle $_[0]',
971 anntu => 'Talk disattivato alle $_[0]',
972 badnode1 => '$_[0] e\' un nodo disabilitato',
973 badnode2 => '$_[0] e\' un nodo attivo',
974 badnode3 => 'Lista dei nodi disabilitati:-',
975 bbse1 => 'Per favore inserisci l\'indirizzo del tuo BBS con set/bbs <tuo bbs>',
976 bbs => 'Il tuo BBS e\' ora \"$_[0]\"',
977 beepoff => 'I beep sono disattivati',
978 beepon => 'I beep sono attivati',
979 call1 => 'Ricerca del nominativo via $_[0]:',
980 conother => 'Spiacente $_[0] sei connesso già su un\'altra porta',
981 concluster => 'Spiacente $_[0] sei connesso già alla rete cluster (su $_[1])',
982 conscript => 'nessuno script di connessione chiamato \"$_[0]\" trovato in $main::root/connect',
983 confail => 'connessione a $_[0] fallita ($_[1])',
984 constart => 'connessione a $_[0] iniziata',
985 deluser => 'L\'utente $_[0] e\' stato eliminato',
986 db1 => 'Questo database e\' presso $_[0]',
987 db2 => 'Spiacente, ma la chiave: $_[0] non e\' stata trovata in $_[1]',
988 db3 => 'Spiacente, il database $_[0] non esiste qui',
989 db4 => 'Spiacente, il database $_[0] presso $_[1] non e\' disponibile al momento',
990 db5 => 'Sto accedendo al database remoto presso $_[0]...attendere...',
991 db6 => 'Il database $_[0] esiste già, cancellalo prima',
992 db7 => 'Il database $_[0] e\' stato creato per il nodo remoto $_[1]',
993 db8 => 'Il database $_[0] e\' stato creato localmente',
994 db9 => 'Il database $_[0] e\' stato eliminato',
995 db10 => '$_[0] record importati in $_[1]',
996 db11 => 'Sto inviando le tue richieste a $_[0], attendi...',
997 dfreq1 => 'Frequenza non valida $_[0], deve essere del tipo 0/30000 o hf o hf/cw',
998 dir1 => 'Nessun messaggio trovato',
999 disc1 => 'Disconnesso da $_[0]',
1000 disc2 => 'Canalew $_[0] disconnesso',
1001 disc3 => 'Nessun canale, ma la connessione $_[0] disconnessa',
1002 disc4 => 'Nessun canale o connessione ma $_[0] disconnesso',
1004 dup => 'Spiacente, questo e\' un doppione',
1005 dx1 => 'Frequenza $_[0] non nella banda (controlla show/band); sintassi: DX [BY nominativo] freq nominativo commento',
1006 dx2 => 'Serve un nominatico; sintassi: DX [BY nominativo] freq nominativo commento',
1007 dx3 => 'Il nominativo o la frequenza sono errati',
1008 dxs => 'DX Spots attivati alle $_[0]',
1009 dxu => 'DX Spots disattivati alle $_[0]',
1010 e1 => 'Comando errato',
1011 e2 => 'Errore: $_[0]',
1012 e3 => '$_[0]: $_[1] non trovato',
1013 e4 => 'Inserire un prefisso o un nominativo',
1014 e5 => 'Non permesso',
1015 e6 => '*** Nessuna stazione specificata ***',
1016 e7 => 'il nominativo $_[0] non e\' visibile sul cluster',
1017 e8 => 'Inserire un nominativo o del testo',
1018 e9 => 'Inserire del testo',
1019 e10 => '$_[0] non connesso localmente',
1020 e11 => 'Impossibile usare $main:mycall come destinazione',
1021 e12 => 'Inserire il nominativo di un nodo',
1022 e13 => '$_[0] non e\' un nodo',
1023 e14 => 'Il primo argomento deve essere numerico e > 0',
1024 e15 => 'qualificatore non valido \"$_[0]\"',
1025 e16 => 'Il file \"$_[0]\" esiste',
1026 e17 => 'Non usare le parole: @_ qui',
1027 e18 => 'Impossibile connettere $_[0] ($!)',
1028 e19 => 'Carattere non valido nella linea',
1029 e20 => 'separatore $_[0] non riconosciuto',
1030 e21 => '$_[0] non e\' numerico',
1031 e22 => '$_[0] non e\' un nominativo',
1032 e23 => '$_[0] non e\' un intervallo (es 0/30000)',
1033 e24 => 'Spiacente, l\'accesso ad internet non e\' abilitato',
1034 e25 => 'Spiacente il valore deve essere tra $_[0] e $_[1]',
1035 e26 => 'Troppi errori, stai per essere disconnesso',
1036 e27 => '$_[0] non e\' un prefisso numeroco o di nominativo',
1037 e28 => 'Spiacente, devi essere registrato (SP $main::myalias per registrarti)',
1038 e29 => 'E\' necessaria una password',
1040 echoon => 'Echo abilitato',
1041 echooff => 'Echo disabilitato',
1042 echow => '*Echo e\' al momento disabilitato, usa set/echo per abilitarlo',
1043 emaile1 => 'Per favore inserisci il tuo indirizzo email con: set/email <indirizzo>',
1044 emaila => 'Il tuo indirizzo email e\' ora \"$_[0]\"',
1045 email => 'Indirizzo email impostato a: $_[0]',
1046 export1 => 'sintassi: export <num_mess> <nome_file>',
1047 export2 => '$_[3] ha problemi esportando i messaggi da $_[0] a $_[1] ($_[2])',
1048 export3 => '$_[2 ] messaggi esportati da $_[0] a $_[1]',
1049 filter1 => 'Filtro $_[0] aggiornato per $_[1]',
1050 filter2 => 'Chiave sconosciuta per il filtro $_[0]',
1051 filter3 => 'Nessun filtro definito per $_[0]',
1052 filter4 => '$_[0]$_[1] Filtro $_[2] cancellato per $_[3]',
1053 filter5 => 'necessito qualche comando per i filtri...',
1054 filter6 => '$_[0]$_[1] Filtro per $[2] non trovato',
1055 grids => 'DX Grid attivato alle $_[0]',
1056 gridu => 'DX Grid disattivato alle $_[0]',
1057 illcall => 'Spiacente, $_[0] non e\' un nominativo valido',
1058 hasha => '$_[0] già esiste $_[1]',
1059 hashb => '$_[0] aggiunto a $_[1]',
1060 hashc => '$_[0] rimosso da $_[1]',
1061 hashd => '$_[0] non in $_[1]',
1062 hashe => '$_[0] impostato a $_[1]',
1063 helpe1 => 'Aiuto non disponibile, contatta il sysop',
1064 helpe2 => 'Nessun aiuto per $_[0]',
1065 heres => 'Here abilitato per $_[0]',
1066 heade1 => 'Sto usando le coordinate $main::mycall, e\' preferibile impostarle con set/location o set/qra',
1067 hereu => 'Here disattivato per $_[0]',
1068 homebbs => 'Home BBS impostata a: $_[0]',
1069 homenode => 'Home Node impostato a: $_[0]',
1070 hnodee1 => 'Per piacere imposta il tuo Home Node con set/homenode <nominativo_cluster>',
1071 hnodee2 => 'Impostazione dell\'homenode fallita per $_[0]',
1072 hnode => 'Il tuo Homenode e\' adesso \"$_[0]\"',
1073 init1 => 'inizializzaione inviata a $_[0]',
1074 iso => '$_[0] Isolato',
1075 isou => '$_[0] non Isolato',
1076 isoc => '$_[0] creato ed isolato',
1077 isoari => 'c\'e\' una filtro sulla rotta in ingresso per $_[0]; eliminala con clear/route input $_[0] prima',
1078 isoaro => 'c\'e\' una filtro sulla rotta in uscita per $_[0]; eliminala con clear/route $_[0] prima',
1079 isow => '$_[0] e\' isolato; unset/isolate $_[0] prima',
1080 l1 => 'Spiacente $_[0], sei già collegato sun un altro canale',
1081 l2 => 'Benvenuto $_[0] sul Cluster $main::mycall a $main::myqth\nsoftware in uso DXSpider V$main::version build $main::build',
1082 lang => 'La lingua selezionata e\' adesso Italiano',
1083 lange1 => 'set/language <lingua> dove <lingua> e\' una tra ($_[0])',
1084 lange2 => 'impostazione lingua fallita per $_[0]',
1085 lh1 => '$main::data/hop_table.pl non esiste',
1086 loce1 => 'Per piacere inserisci la tua posizione, set/location <latitudine longitudine>',
1087 loce2 => 'Non riconosco \"$_[0]\" come Lat/Long (es 52 20 N 0 16 E)',
1088 loce3 => '$_[0] e\' una locatore QRA, usa: set/qra $_[0]',
1089 loc => 'I tuoi dati Lat/Long sono ora \"$_[0]\"',
1090 lockout => '$_[0] Bloccato',
1091 lockoutc => '$_[0] Creato e bloccato',
1092 lockoutun => '$_[0] Sbloccato',
1093 lockoutuse => 'sintassi: sh/lockout <nominativo>|ALL',
1094 loginu => 'L\'utente $_[0] e\' entrato nel cluster',
1095 logoutu => 'L\'utente $_[0] e\' uscito dal cluster',
1096 loginn => 'Il nodo $_[0] si e\' connesso',
1097 logoutn => 'Il nodo $_[0] si e\' disconnesso',
1098 m1 => 'Inserisci il Soggetto (30 caratteri):',
1099 m2 => 'Copia del messaggio $_[0] spedita a $_[1]',
1100 m3 => 'Spiacente, $_[0] non e\' un destinatario accettabile',
1101 m4 => 'Spiacente, non posso accedere al messaggio $_[0]',
1102 m5 => 'Spiacente, ho bisogno del numero di un messaggio',
1103 m6 => 'Rispondi a: $_[0]',
1104 m7 => 'Soggetto : $_[0]',
1105 m8 => 'Scrivi il messaggio e batti /EX per spedirlo o /ABORT per uscire',
1106 m9 => 'Nuovi messaggi sono arrivati per te',
1107 m10 => 'Messaggio abortito',
1108 m11 => 'Il messaggio $_[0] e\' stato salvato e inviato a $_[1]',
1109 m12 => 'Il messaggio $_[0] e\' stato cancellato',
1110 m13 => 'Il messaggio $_[0] non esiste',
1111 m14 => 'Il messaggio $_[0] e\' stato marcato come spedito a $_[1]',
1112 m15 => 'Il messaggio $_[0] risolta ora non spedito a $_[1]',
1113 m16 => 'Specificare il numero del messaggio',
1114 m17 => 'Spiacente, impossibile spedire messaggi in modo $_[0]',
1115 msg1 => 'Bollettino messo in coda',
1116 msg2 => 'Messaggio messo in coda',
1117 msg3 => 'Msg $_[0]: $_[1] cambiato da $_[2] a $_[3]',
1118 msgu => 'sintassi: msg <comando> <num_mess> dati...',
1119 merge1 => 'Richiesta di merge per gli spot $_[1] e i WWV $_[2] spedita a $_[0]',
1120 moon => 'Localita gg/mm/aaaa Alba Tramonto',
1121 moon_with_azel => 'Località
1122 gg/mm/aaaa Alba Tramonto Azim Elev',
1123 mond => 'Monitor disabilitato',
1124 mone => 'Monitor abilitato',
1125 namee1 => 'Per favore inserisci con set/name <nome>',
1126 namee2 => 'Impossibile trovare l\'utente $_[0]!',
1127 name => 'Il tuo nome ora e\' \"$_[0]\"',
1128 nodea => '$_[0] impostato come nodo stile AK1A',
1129 nodeac => '$_[0] creato come nodo stile AK1A',
1130 nodeb => '$_[0] impostato come BBS',
1131 nodebc => '$_[0] creato come BBS',
1132 nodec => '$_[0] impostato come nodo stile CLX',
1133 nodecc => '$_[0] creato come nodo stile CLX',
1134 noder => '$_[0] impostato come nodo stile AR-Cluster',
1135 noderc => '$_[0] creato come nodo stile AR-Cluster',
1136 nodes => '$_[0] impostato come nodo stile DXSpider',
1137 nodesc => '$_[0] creato come nodo stile DXSpider',
1138 nodex => '$_[0] impostato come nodo stile DXNET',
1139 nodexc => '$_[0] creato come nodo stile DXNET',
1140 nodeu => '$_[0] impostato come utente',
1141 nodee1 => 'Non puoi utilizzare questo comando mentre il destinatario ($_[0]) e\' connesso',
1142 notdone => 'Non eseguito',
1143 nothere => 'Spiacente, ma $_[0] non e\' presente al momento, prova più tardi',
1144 obscount => 'Contatore di obsolescenza del ping per $_[0] impostato a $_[1]',
1145 ok => 'Operazione eseguita con successo',
1146 outconn => 'Connessione in corso per $_[0]',
1147 page => 'Premi Invio per continuare, A per annullare ($_[0] linee) >',
1148 pagelth => 'La lunghezza della pagina e\' adesso $_[0]',
1149 passerr => 'sintassi: SET/PASS <password> <nominativo>',
1150 password => 'Password impostata o cambiata per $_[0]',
1151 passwordu => 'Password rimossa per $_[0]',
1152 pingo => 'Ping mandato a $_[0]',
1153 pingi => 'Ping ritornato da $_[0] $_[1] (media $_[2]) secondi',
1154 pinge1 => 'Non puoi far un ping su te stesso!',
1155 pingint => 'Intervallo di ping per $_[0] impostato a $_[1] secondi',
1156 'pos' => 'Dal nominativo: $_[0] Lat: $_[1] Long: $_[2]',
1157 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1158 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1159 priv => 'Privilegi cambiati per $_[0]',
1160 prs => 'Prompt impostato a \"$_[0]\"',
1161 pru => 'Prompt reimpostato al predefinito',
1162 prx => '$main::mycall >',
1163 pw0 => 'Inserisci la vecchia password: ',
1164 pw1 => 'Inserisci la nuova password: ',
1165 pw2 => 'Reinserisci la nuova password: ',
1166 pw3 => 'Password modificata',
1167 pw4 => 'Le password sono differenti, password NON cambiata',
1168 qll => 'Per favore inserisci la tua località con set/location o set/qra',
1169 qthe1 => 'Per favore inserisci il tuo QTH con set/qth <qth>',
1170 qth => 'Il tuo QTH e\' adesso \"$_[0]\"',
1171 qrae1 => 'Per favore inserisci il tuo locatore QRA con set/qra <locatore> (es set/qra JM77GF)',
1172 qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS',
1173 qrae2 => 'Non riconosco \"$_[0]\" come locatore QRA (es JM77GF)',
1174 qra => 'Il tuo locatore QRA e\' adesso \"$_[0]\"',
1175 rcmdo => 'RCMD \"$_[0]\" spedito a $_[1]',
1176 rec => '$_[0] records',
1177 read1 => 'Spiacente, non ci sono nuovi messaggi per te',
1178 read2 => 'Messaggio $_[0] non trovato',
1179 read3 => 'Messaggio $_[0] non disponibile',
1180 rec => '$_[0] records',
1181 reg => '$_[0] registrato',
1182 regc => '$_[0] creato e registrato',
1183 reginac => 'La registrazione non e\' attiva (set/var \$main::reqreg = 1 per attivarla)',
1184 regun => '$_[0] deregistrato',
1185 route => '$_[0] su $_[1] via $_[2]',
1186 sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins',
1187 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km',
1188 sat3 => 'Sintassi: SH/SAT <nome> [<ore> <intervallo>]',
1189 sat4 => 'Satelliti disponibili/Età dei Kepleriani (giorni):-',
1190 sat5 => 'serve nnnnn.AMSAT nel soggetto per caricare i kepleriani dal messaggio',
1191 satnf => 'Satellite $_[0] sconosciuto',
1193 sethop1 => 'sintassi: set/hops <nominativo> ann|spots|wwv|wcy <num di salti>',
1194 sethop2 => '$_[0] salti impostai per $_[1]$_[2] per $_[3]',
1195 sethop3 => 'Nessun salto impostato per $_[0]',
1196 shutting => '$main::mycall si sta arrestando...',
1197 sloc => 'Cluster lat $_[0] long $_[1], Non scordare di camberli nel file DXVars.pm',
1198 snode1 => 'Nodo Nominativo Ordine Versione',
1199 snode2 => '$_[0] $_[1] $_[2]',
1200 snode3 => '$_[0] Nominativo sconosciuto',
1201 sqra => 'Locatore QRA del Cluster$_[0], NON DIMENTICARE DI CAMBIARLO NEL TUO FILE DXVars.pm',
1202 sorry => 'Spiacente',
1203 spf1 => 'spoof: sto creando il nuovo utente $_[0]',
1204 stathf => 'Statistiche HF DX Spot, ultimi 31 giorni',
1205 stathft => 'Statistiche HF DX Spot, ultimi 31 giorni per DXCC $_[0]',
1206 statvhf => 'Statistiche VHF+ DX Spot, ultimi 31 giorni',
1207 statvhft => 'Statistiche VHF+ DX Spot, ultimi 31 days per DXCC $_[0]',
1208 statdx => 'Totale DX Spots degli ultimi 31 giorni',
1209 sun => 'Località gg/mm/aaaa Alba Tramonto',
1210 sun_with_azel => 'Località
1211 gg/mm/aaaa Alba Tramonto Azim Elev',
1213 suser1 => 'sintassi: nominatio campo_utente valore',
1214 suser2 => 'Utente $_[0] non trovato',
1215 suser3 => 'Il campo utente \'$_[0]\' era \'$_[1]\' ora e\' impostao a \'$_[2]\'',
1216 suser4 => 'Il campo utente \'$_[0]\' non esiste',
1217 time1 => 'Ora locale: $_[0] $_[1], UTC $_[2]',
1218 time2 => '$_[0] Ora (standard) locale: $_[1] ($_[2] ore)',
1219 time3 => '$_[0] $_[1]',
1220 talks => 'Talk abilitato per $_[0]',
1221 talku => 'Talk disabilitato per $_[0]',
1222 talkend => 'Chiude il la conversazione con te',
1223 talkinst => 'Stai entrando nel modo conversazione, /EX per uscire, /<cmd> per eseguire un comando',
1224 talknh => 'Spiaente $_[0] non e\' collegato al momento',
1225 talkprompt => 'Talk ($_[0])>',
1226 talkstart => 'Inizia una conversazione con te',
1227 unsethop1 => 'sintassi: unset/hops <nominativo> ann|spots|wwv|wcy',
1228 unsethop2 => 'salti eliminati su $_[1] per $_[0]',
1229 usernf => '*** Record utente per $_[0] non trovato ***',
1230 wcy1 => '$_[0] manca o e\' fuori limite',
1231 wcy2 => 'WCY duplicato',
1232 wwv1 => '$_[0] manca o e\' fuori limite',
1233 wwv2 => 'WWV duplicato',
1234 wwvs => 'WWV abilitati per $_[0]',
1235 wwvu => 'WWV disabilitati per $_[0]',
1236 wxs => 'WX abilitati per $_[0]',
1237 wxu => 'WX disabilitati per $_[0]',
1241 addr => 'Adresa nastavena na: $_[0]',
1242 already => '$_[0] je uz pripojen',
1243 anns => 'Ann je povolen pro $_[0]',
1244 annu => 'Ann je zakazan pro $_[0]',
1245 annts => 'AnnTalk je povolen pro $_[0]',
1246 anntu => 'AnnTalk je zakazan pro $_[0]',
1247 badnode1 => '$_[0] je nyni zavadny nod',
1248 badnode2 => '$_[0] je nyni bezvadny nod',
1249 badnode3 => 'Seznam zavadnych nodu:-',
1250 bbse1 => 'Prosim zadej svou BBS adresu, set/bbs <tva bbs adresa>',
1251 bbs => 'Tva BBS adresa je nyni \"$_[0]\"',
1252 beepoff => 'Zvuky jsou nyni vypnuty',
1253 beepon => 'Zvuky jsou nyni zapnuty',
1254 call1 => 'Vyhledani znacky pres $_[0]:',
1255 conother => 'Lituji $_[0], jses na me napojen na jinem portu',
1256 concluster => 'Lituji $_[0], jses uz napojen nekde jinde na clusteru (na $_[1])',
1257 conscript => 'nebyl spusten connect skript \"$_[0]\" nalezen v $main::root/connect',
1258 confail => 'pripojeni na $_[0] selhalo ($_[1])',
1259 constart => 'pripojeni na $_[0] bylo zahajeno',
1260 deluser => 'Uzivatel $_[0] byl smazan',
1261 db1 => 'Tato databaze se nachazi na $_[0]',
1262 db2 => 'Lituji, ale klic $_[0] nebyl nalezen v $_[1]',
1263 db3 => 'Lituji, ale databaze $_[0] se zde nenachazi',
1264 db4 => 'Lituji, databaze $_[0] na $_[1] neni momentalne online',
1265 db5 => 'Pripojuji vzdalenou databazi na $_[0]...cekej...',
1266 db6 => 'Databaze $_[0] uz existuje, nejprve ji smaz',
1267 db7 => 'Databaze $_[0] byla vytvorena pro vzdaleny nod $_[1]',
1268 db8 => 'Databaze $_[0] byla vytvorena lokalne',
1269 db9 => 'Databaze $_[0] byla smazana',
1270 db10 => '$_[0] zaznamu bylo vlozeno do $_[1]',
1271 db11 => 'Posilam tvuj pozadavek do $_[0], prosim cekej...',
1272 dfreq1 => 'Neplatna freq $_[0], potrebuji napr 0/30000 nebo hf nebo hf/cw',
1273 dir1 => 'Zadne zpravy nebyly nalezeny',
1274 disc1 => 'Odpojeno uzivatelem $_[0]',
1275 disc2 => 'Kanal $_[0] odpojen',
1276 disc3 => 'Zadny kanal, ale spojeni $_[0] zruseno',
1277 disc4 => 'Zadny kanal ani spojeni, ale $_[0] byl odpojen',
1279 dup => 'Lituji, toto je duplikat',
1280 dx1 => 'Frekvence $_[0] neni uvnitr pasma (viz show/band); pouziti: DX [BY call] freq call text',
1281 dx2 => 'Potrebuji znacku; pouziti: DX [BY call] freq call text',
1282 dx3 => 'Znacka nebo frekvence je neplatna',
1283 dxs => 'DX spoty jsou povoleny pro $_[0]',
1284 dxu => 'DX spoty jsou zakazany pro $_[0]',
1285 e1 => 'Neplatny prikaz',
1286 e2 => 'Chyba: $_[0]',
1287 e3 => '$_[0]: $_[1] nebylo nalezeno',
1288 e4 => 'Potrebuji alespon prefix nebo znacku',
1289 e5 => 'Neni povoleno',
1290 e6 => '*** Zadna stanice specifikovana ***',
1291 e7 => 'znacka $_[0] neni v clusteru viditelna',
1292 e8 => 'Potrebuji znacku a nejaky text',
1293 e9 => 'Potrebuji alespon nejaky text',
1294 e10 => 'Stanice $_[0] neni pripojena lokalne',
1295 e11 => 'Nemohu pouzit $main:mycall jako cil',
1296 e12 => 'Potrebuji znacku nodu',
1297 e13 => '$_[0] neni nod',
1298 e14 => 'Prvni argument musi byt cislo vetsi nez 0',
1299 e15 => 'neplatny parametr \"$_[0]\"',
1300 e16 => 'Soubor \"$_[0]\" uz existuje',
1301 e17 => 'Prosim nepouzivej zde toto slovo: @_',
1302 e18 => 'Nemohu se pripojit na $_[0] ($!)',
1303 e19 => 'neplatny znak v radku',
1304 e20 => 'retezec $_0] nebyl rozpoznan',
1305 e21 => '$_[0] neni cislo',
1306 e22 => '$_[0] neni znacka',
1307 e23 => '$_[0] neni v rozsahu (napr 0/30000)',
1308 e24 => 'Lituji, pristup na internet neni povolen',
1309 e25 => 'Lituji, hodnota musi byt mezi $_[0] a $_[1]',
1310 e26 => 'Prilis mnoho chyb najednou, jsi odpojovan',
1311 e27 => '$_[0] neni cislo nebo prefix',
1312 e28 => 'Lituji, musis byt registrovan (SP $main::myalias k registraci)',
1313 e29 => 'Potrebuji heslo',
1314 e30 => 'Nemohu otevrit $_[0] $!',
1315 e31 => '$_[0] neni uzivatel',
1316 e32 => 'Potrebuji frazi',
1317 e33 => '$_[0] neni pocet dnu nebo platne datum',
1319 echoon => 'Echo povoleno',
1320 echooff => 'Echo zakazano',
1321 echow => '*Echo je momentalne zakazano, pouzij set/echo k povoleni',
1322 emaile1 => 'Prosim zadej svou e-mailovou adresu, set/email <tva emailova adresa>',
1323 emaila => 'Tva e-mailova adresa je nyni \"$_[0]\"',
1324 email => 'E-mailova adresa je nastavena na: $_[0]',
1325 export1 => 'pouziti: export <cislo zpravy> <soubor>',
1326 export2 => '$_[3] hlasi chyby pri exportu zpravy $_[0] do $_[1] ($_[2])',
1327 export3 => '$_[2 ] exportoval zpravu $_[0] to $_[1]',
1328 filter1 => 'Filtr $_[0] byl zmenen pro for $_[1]',
1329 filter2 => 'Neznamy prikaz filtru $_[0]',
1330 filter3 => 'Nejsou zadne definovane filtry pro $_[0]',
1331 filter4 => '$_[0]$_[1] Filtr $_[2] smazan pro $_[3]',
1332 filter5 => 'potrebuji nejake prikazy filtru...',
1333 filter6 => '$_[0]$_[1] Filtr pro $[2] nebyl nalezen',
1334 grids => 'QRA ctverec byl povolen pro $_[0]',
1335 gridu => 'QRA ctverec byl zakazan pro $_[0]',
1336 illcall => 'Lituji, $_[0] neni platna znacka',
1337 hasha => '$_[0] uz existuje v $_[1]',
1338 hashb => '$_[0] byl pridan do $_[1]',
1339 hashc => '$_[0] byl odstranen z $_[1]',
1340 hashd => '$_[0] neni v $_[1]',
1341 hashe => '$_[0] byl nastaven v $_[1]',
1342 helpe1 => 'Systemova napoveda neni k dispozici, informuj sysopa',
1343 helpe2 => 'Napoveda neni k dispozici k $_[0]',
1344 heres => '$_[0] je pritomen',
1345 heade1 => 'S pouzitim souradnic clusteru, doporucuji zadat set/location nebo set/qra',
1346 hereu => '$_[0] neni pritomen',
1347 homebbs => 'Domaci BBS je nastavena na: $_[0]',
1348 homenode => 'Domaci DXC nod je nastaven na: $_[0]',
1349 hnodee1 => 'Prosim zadej svuj domaci DXC nod, set/homenode <tvuj domaci DX cluster>',
1350 hnodee2 => 'Nastaveni domaciho nodu na $_[0] selhalo',
1351 hnode => 'Tvuj domaci nod je nyni \"$_[0]\"',
1352 init1 => 'vyslana inicializacni zprava do $_[0]',
1353 iso => '$_[0] izolovan',
1354 isou => '$_[0] neni izolovan',
1355 isoc => '$_[0] vytvoren a izolovan',
1356 isoari => 'vstupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route input $_[0]',
1357 isoaro => 'vystupni route filtr pro $_[0] uz existuje; zadej nejprve clear/route $_[0]',
1358 isow => '$_[0] je izolovan; zadej nejprve unset/isolate $_[0]',
1359 l1 => 'Lituji $_[0], uz jsi zalogovan na jinem kanalu',
1360 l2 => 'Ahoj $_[0], toto je $main::mycall, $main::myqth\npouzivajici DXSpider V$main::version build $main::build',
1361 lang => 'Jazyk je nyni nastaven na Cestinu (napoveda zatim v procesu)',
1362 lange1 => 'set/language <lang> kde <lang> je jedno z ($_[0])',
1363 lange2 => 'selhalo nastaveni jazyka na $_[0]',
1364 lh1 => '$main::data/hop_table.pl neexistuje',
1365 loce1 => 'Prosim zadej svou polohu, set/location <sirka delka>',
1366 loce2 => 'Nemohu rozpoznat \"$_[0]\" jako sirka/delka (napr 52 20 N 0 16 E)',
1367 loce3 => '$_[0] je QRA lokator, prosim pouzij: set/qra $_[0]',
1368 loc => 'Tva poloha (sirka/delka) je nyni \"$_[0]\"',
1369 lockout => '$_[0] zamknuto',
1370 lockoutc => '$_[0] vytvoreno a zamknuto',
1371 lockoutun => '$_[0] Odemceno',
1372 lockoutuse => 'pouziti: sh/lockout <znacka>|ALL',
1373 loginu => 'Uzivatel $_[0] prihlasen',
1374 logoutu => 'Uzivatel $_[0] odhlasen',
1375 loginn => 'Nod $_[0] prihlasen',
1376 logoutn => 'Nod $_[0] odhlasen',
1377 m1 => 'Zadej nazev (30 znaku):',
1378 m2 => 'Kopie zpravy $_[0] byla odeslana k $_[1]',
1379 m3 => 'Lituji, $_[0] je neplatna cilova adresa',
1380 m4 => 'Lituji, zprava $_[0] neni dostupna',
1381 m5 => 'Lituji, potrebuji cislo zpravy',
1382 m6 => 'Odpoved na: $_[0]',
1383 m7 => 'Nezev: $_[0]',
1384 m8 => 'Zadej text zpravy /EX pro konec nebo /ABORT k preruseni',
1385 m9 => 'Mas novou zpravu',
1386 m10 => 'Zprava prerusena',
1387 m11 => 'Zprava c. $_[0] ulozena a smerovana na $_[1]',
1388 m12 => 'Zprava c. $_[0] byla smazana',
1389 m13 => 'Zprava c. $_[0] chybi',
1390 m14 => 'Zprava c. $_[0] byla oznacena a zaslana do $_[1]',
1391 m15 => 'Zprava c. $_[0] byla neoznacena a zaslana do $_[1]',
1392 m16 => 'Potrebuji cislo zpravy',
1393 m17 => 'Lituji, nemohu posilat zpravy v modu $_[0]',
1394 m18 => 'Lituji, zprava $_[0] ma momentalne status KEEP',
1395 msg1 => 'Zpravy v rubrikach cekaji ve fronte',
1396 msg2 => 'Privatni zpravy cekaji ve fronte',
1397 msg3 => 'Zprava $_[0]: $_[1] byla zmenena z $_[2] na $_[3]',
1398 msgu => 'pouziti: msg <prikaz> <cislo zpravu> data...',
1399 merge1 => 'Pozadavek na Merge pro $_[1] spotu a $_[2] WWV byl zaslan do $_[0]',
1400 moon => 'Poloha dd/mm/yyyy Vychod Zapad',
1401 moon_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev',
1402 mond => 'Monitoring je zakazan',
1403 mone => 'Monitoring je povolen',
1404 namee1 => 'Prosim zadej sve jmeno, set/name <tve jmeno>',
1405 namee2 => 'Nemohu najit uzivatele $_[0]!',
1406 name => 'Tve jmeno je nyni \"$_[0]\"',
1407 nodea => '$_[0] nastaven jako nod typu AK1A',
1408 nodeac => '$_[0] vytvoren jako nod typu AK1A',
1409 nodeb => '$_[0] nastaven jako BBS',
1410 nodebc => '$_[0] vytvoren jako BBS',
1411 nodec => '$_[0] nastaven jako nod typu CLX',
1412 nodecc => '$_[0] vytvoren jako nod typu CLX',
1413 noder => '$_[0] nastaven jako nod typu AR-Cluster',
1414 noderc => '$_[0] vytvoren jako nod typu AR-Cluster',
1415 nodes => '$_[0] nastaven jako nod typu DXSpider',
1416 nodesc => '$_[0] vytvoren jako nod typu DXSpider',
1417 nodex => '$_[0] nastaven jako nod typu DXNET',
1418 nodexc => '$_[0] vytvoren jako nod typu DXNET',
1419 nodeu => '$_[0] nastaven opet jako uzivatel',
1420 nodee1 => 'Nemuzes pouzit tento prikaz zatimco tvuj cil ($_[0]) je on-line',
1421 notdone => 'NEBYLO provedeno',
1422 nothere => 'Lituji, ale $_[0] neni momentalne zde, zkus to pozdeji',
1423 obscount => 'Pocatecni hodnota Ping citace nodu $_[0] byla nastavena na $_[1]',
1424 ok => 'Operace byla uspesna',
1425 outconn => 'Zbyvajici spojeni na $_[0]',
1426 page => 'Stiskni Enter pro pokracovani, A k preruseni ($_[0] radku) >',
1427 pagelth => 'Delka stranky je nyni $_[0]',
1428 passerr => 'Prosim pouzij: SET/PASS <heslo> <znacka>',
1429 passphrase => 'Fraze byla nastavena nebo zmenena pro $_[0]',
1430 passphraseu => 'Fraze byla odstranena pro $_[0]',
1431 password => 'Heslo bylo nastaveno nebo zmeneno pro $_[0]',
1432 passwordu => 'Heslo bylo odstraneno pro $_[0]',
1433 pc90s => 'PC90 bylo povoleno pro $_[0]',
1434 pc90u => 'PC90 bylo zakazano $_[0]',
1435 pingo => 'Ping byl zaslan na $_[0]',
1436 pingi => 'Ping se vratil od $_[0] $_[1] (Prum $_[2]) sekundy',
1437 pinge1 => 'Nemuzu pingnout sam sebe!',
1438 pingint => 'Ping interval na $_[0] byl nastaven na $_[1] sekundy',
1439 'pos' => 'Od znacky: $_[0] Sirka: $_[1] Delka: $_[2]',
1440 pr => '$_[0] de $main::mycall $_[1] $_[2] >',
1441 pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >',
1442 prs => 'Prompt byl nastaven na \"$_[0]\"',
1443 pru => 'Prompt byl vracen na default',
1444 priv => 'Uroven prav byla zmenena na $_[0]',
1445 prx => '$main::mycall >',
1446 pw0 => 'Zadej stare heslo: ',
1447 pw1 => 'Zadej nove heslo: ',
1448 pw2 => 'Zadej znovu nove heslo: ',
1449 pw3 => 'Heslo bylo zmeneno',
1450 pw4 => 'Hesla se lisi, heslo NEBYLO zmeneno',
1451 qll => 'Prpsim zadej svou polohu s pomoci set/location nebo set/qra',
1452 qthe1 => 'Prosim zadej sve QTH, set/qth <tve QTH>',
1453 qth => 'Tve QTH je nyni \"$_[0]\"',
1454 qrae1 => 'Prosim zadej svuj QRA lokator, set/qra <qra lokator> (napr set/qra JN79FM)',
1455 qrashe1 => 'Prosim zadej QRA locator, napr sh/qra JN79FM nebo sh/qra JN79FM JN63GV',
1456 qrae2 => 'Nerozpoznal jsem \"$_[0]\" jako QRA lokator (napr JN79FM)',
1457 qra => 'Tvuj QRA lokator je nyni \"$_[0]\"',
1458 rcmdo => 'RCMD \"$_[0]\" bylo zaslano do $_[1]',
1459 read1 => 'Lituji, nemas zadne nove zpravy',
1460 read2 => 'Zprava $_[0] nenalezena',
1461 read3 => 'Msg $_[0] neni k dispozici',
1462 rec => '$_[0] zaznamu',
1463 reg => '$_[0] registrovano',
1464 regc => '$_[0] vytvoreno a registrovano',
1465 reginac => 'Registrace neni aktivni (set/var \$main::reqreg = 1 k aktivaci)',
1466 regun => '$_[0] neregistrovano',
1467 route => '$_[0] na $_[1] via $_[2]',
1468 sat1 => 'Tabulka pro $_[0] pro nasledujicich $_[1] hodin s intervalem $_[2] min',
1469 sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Vzdal Km',
1470 sat3 => 'Syntaxe: SH/SAT <jmeno> [<hodin> <interval>]',
1471 sat4 => 'Druzice k dispozici/Stari Kepl. elem (dny):-',
1472 sat5 => 'potrebuji nnnnn.AMSAT v nazvu ke stazeni keps z teto zpravy',
1473 satnf => 'Druzice $_[0] je neznama',
1475 set => '$_[0] povoleno pro $_[1]',
1476 sethop1 => 'pouziti: set/hops <znacka> ann|spots|wwv|wcy <pocet skoku>',
1477 sethop2 => '$_[0] skoku nastaveno na $_[1]$_[2] pro $_[3]',
1478 sethop3 => 'Zadny pocet skoku nastaven pro $_[0]',
1479 shu => '\"SHU\" nestaci, je treba alespon \"SHUT\" k vypnuti nodu',
1480 shutting => '$main::mycall se vypina...',
1481 sloc => 'Cluster lat $_[0] long $_[1], NEZAPOMEN ZMENIT DXVars.pm',
1482 snode1 => 'Nod Znacka Typ Verze ',
1483 snode2 => '$_[0] $_[1] $_[2]',
1484 snode3 => '$_[0] Neznama znacka',
1485 sqra => 'Cluster QRA Lokator$_[0], NEZAPOMEN ZMENIT DXVars.pm',
1487 spf1 => 'spoof: vytvarim noveho uzivatele $_[0]',
1488 stathf => 'HF DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]',
1489 stathft => 'HF DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]',
1490 statvhf => 'VHF+ DX Spot Stats, poslednich $_[1] dni pocinaje $_[0]',
1491 statvhft => 'VHF+ DX Spot Stats, poslednich $_[2] dni pocinaje $_[1] pro DXCC $_[0]',
1492 statdx => 'Prehled DX Spotu pro $_[1] dni pocinaje $_[0]',
1493 sun => 'Poloha dd/mm/yyyy Vychod Zapad',
1494 sun_with_azel => 'Poloha dd/mm/yyyy Vychod Zapad Azim Elev',
1495 susdb1 => 'pouziti: znacka stat mesto',
1496 susdb2 => 'USDB $_[0] bylo $_[1], $_[2]',
1497 susdb3 => 'USDB $_[0] je nyni $_[1], $_[2]',
1498 susdb4 => 'USDB $_[0] smazano',
1499 suser1 => 'pouziti: znacka jmeno_uzivatele hodnota',
1500 suser2 => 'User $_[0] nebylo nalezeno',
1501 suser3 => 'User field \'$_[0]\' bylo \'$_[1]\' nyni nastaveno na \'$_[2]\'',
1502 suser4 => 'Jmeno uzivatele \'$_[0]\' neexistuje',
1503 time1 => 'Lokalni cas: $_[0] $_[1], UTC $_[2]',
1504 time2 => '$_[0] Lokalni (standardni) cas: $_[1] ($_[2] hodin)',
1505 time3 => '$_[0] $_[1]',
1506 talks => 'Talk povolen pro $_[0]',
1507 talku => 'Talk zakazan pro $_[0]',
1508 talkend => 'Skoncil spolecnou konverzaci',
1509 talkinst => 'Vstupuji do konverzacniho modu, /EX pro skonceni, /<paikaz> ke spusteni prikazu',
1510 talknh => 'Lituji, $_[0] neni momentalne online',
1511 talkprompt => 'Talk ($_[0])>',
1512 talkstart => 'Zahajil spolecnou konverzaci',
1513 unset => '$_[0] zakazano pro for $_[1]',
1514 unsethop1 => 'pouziti: unset/hops <znacka> ann|spots|wwv|wcy',
1515 unsethop2 => 'pocet skoku neni nastaven na $_[1] pro $_[0]',
1516 usernf => '*** Uzivatelsky zaznam pro $_[0] nebyl nalezen ***',
1517 wcy1 => '$_[0] bud chybi nebo je mimo rozsah',
1518 wcy2 => 'Duplicitni WCY',
1519 wcys => 'WCY je povoleno pro $_[0]',
1520 wcyu => 'WCY je zakazano pro $_[0]',
1521 wwv1 => '$_[0] bud chybi nebo je mimo rozsah',
1522 wwv2 => 'Duplicitni WWV',
1523 wwvs => 'WWV je povoleno pro $_[0]',
1524 wwvu => 'WWV je zakazano pro $_[0]',
1525 wxs => 'WX je povoleno pro $_[0]',
1526 wxu => 'WX je zakazano pro $_[0]',
projects / spider.git / blob