minor manual changes

[spider.git] / sgml / adminmanual_en.sgml

diff --git a/sgml/adminmanual_en.sgml b/sgml/adminmanual_en.sgml
index eff06a860c1d834f1fc67c1f3169c93639f71732..072ba308962039227810e5527c310bb6d580f404 100644 (file)
--- a/sgml/adminmanual_en.sgml
+++ b/sgml/adminmanual_en.sgml
@@ -7,7 +7,7 @@
 <title>The DXSpider Administration Manual v1.50</title> \r
 <author>Ian Maude, G0VGS, (g0vgs@gb7mbc.net), and\r
 Charlie Carroll, K1XX, (k1xx@ptcnh.net)</author>\r
-<date>February 2003 revision 0.3</date>\r
+<date>February 2003 revision 0.4</date>\r
 \r
 <abstract>\r
 A reference for SysOps of the DXSpider DXCluster program.\r
@@ -3655,6 +3655,14 @@ You can carry on with the message until you are ready to send it.
 <bf>set/dx</bf> Allow DX messages to come out on your terminal
 </tt>
 
+<P>
+<sect1>set/dxcq (0)
+
+<P>
+<tt>
+<bf>set/dxcq</bf> Show CQ Zones on the end of DX announcements
+</tt>
+
 <P>
 <sect1>set/dxgrid (0)
 
@@ -3663,6 +3671,14 @@ You can carry on with the message until you are ready to send it.
 <bf>set/dxgrid</bf> Allow QRA Grid Squares on the end of DX announcements
 </tt>
 
+<P>
+<sect1>set/dxitu (0)
+
+<P>
+<tt>
+<bf>set/dxitu</bf> Show ITU Zones on the end of DX announcements
+</tt>
+
 <P>
 <sect1>set/dxnet &lt;call&gt; &lsqb;&lt;call&gt;..&rsqb; (5)
 
@@ -3880,6 +3896,14 @@ fed new style DX Protocol rather normal user commands.
 <bf>set/talk</bf> Allow TALK messages to come out on your terminal
 </tt>
 
+<P>
+<sect1>set/usstate (0)
+
+<P>
+<tt>
+<bf>set/usstate</bf> Allow US State info on the end of DX announcements
+</tt>
+
 <P>
 <sect1>set/wcy (0)
 
@@ -4015,6 +4039,19 @@ If no prefixes or callsigns are given then this command returns the local
 time and UTC as the computer has it right now. If you give some prefixes
 then it will show UTC and UTC + the local offset (not including DST) at
 the prefixes or callsigns that you specify.
+<sect1>show/db0sdx &lt;callsign&gt; (0)
+
+<P>
+<tt>
+<bf>show/db0sdx &lt;callsign&gt;</bf> Show QSL infomation from DB0SDX database
+</tt>
+
+<P>
+This command queries the DB0SDX QSL server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qslinfo.de.
+
+See also SHOW/QRZ, SHOW/WM7D.
 <sect1>show/dx (0)
 
 <P>
@@ -4508,6 +4545,8 @@ example:-
 This command queries the QRZ callbook server on the internet
 and returns any information available for that callsign. This service
 is provided for users of this software by http://www.qrz.com 
+
+See also SHOW/WM7D for an alternative.
 <sect1>show/route &lt;callsign&gt; ... (0)
 
 <P>
@@ -4725,6 +4764,20 @@ the worldwide statistics.
 
 <P>
 Display the most recent WCY information that has been received by the system
+ 
+<sect1>show/wm7d &lt;callsign&gt; (0)
+
+<P>
+<tt>
+<bf>show/wm7d &lt;callsign&gt;</bf> Show callbook details on a US callsigns
+</tt>
+
+<P>
+This command queries the WM7D callbook server on the internet
+and returns any information available for that US callsign. This service
+is provided for users of this software by http://www.wm7d.net.
+
+See also SHOW/QRZ. 
 <sect1>show/wwv (0)
 
 <P>
@@ -5140,6 +5193,22 @@ will allow text with this word again.
 </tt>
 
 <P>
+<sect1>unset/dxcq (0)
+
+<P>
+<tt>
+<bf>unset/dxcq</bf> Stop CQ Zones on the end of DX announcements
+</tt>
+
+<P>
+Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the 
+time, the Spotted's CQ is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.  
 <sect1>unset/dxgrid (0)
 
 <P>
@@ -5153,6 +5222,26 @@ that if the spotter's grid square is known it is output on the end
 of a DX announcement (there is just enough room). Some user programs
 cannot cope with this. You can use this command to reset (or set)
 this feature.
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.  
+<sect1>unset/dxitu (0)
+
+<P>
+<tt>
+<bf>unset/dxitu</bf> Stop ITU Zones on the end of DX announcements
+</tt>
+
+<P>
+Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the 
+time, the Spotted's ITU is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.  
 <sect1>unset/echo (0)
 
 <P>
@@ -5278,6 +5367,28 @@ normal.
 </tt>
 
 <P>
+<sect1>unset/usstate (0)
+
+<P>
+<tt>
+<bf>unset/usstate</bf> Stop US State info on the end of DX announcements
+</tt>
+
+<P>
+If the spotter's or spotted's US State is known it is output on the 
+end of a DX announcement (there is just enough room). 
+
+A spotter's state will appear on the RHS of the time (like 
+SET/DXGRID) and the spotted's State will appear on the LHS of the
+time field. Any information found will override any locator 
+information from SET/DXGRID.
+
+Some user programs cannot cope with this. You can use this command 
+to reset (or set) this feature.
+
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.  
 <sect1>unset/wcy (0)
 
 <P>