#!/usr/bin/perl # # this file contains the system messages. Don't forget to reload them # if you change them (load/messages) # # $Id$ # package DXM; %msgs = ( en => { addr => 'Address set to: $_[0]', already => '$_[0] already connnected', anns => 'Announce flag set on $_[0]', annu => 'Announce flag unset on $_[0]', annts => 'AnnTalk flag set on $_[0]', anntu => 'AnnTalk flag unset on $_[0]', badnode1 => '$_[0] is now a bad node', badnode2 => '$_[0] is now a good node', badnode3 => 'List of Bad Nodes:-', bbse1 => 'Please enter your BBS address,, set/bbs ', bbs => 'Your BBS Address is now \"$_[0]\"', beepoff => 'Beeps are now off', beepon => 'Beeps are now on', call1 => 'Callsign lookup via $_[0]:', conother => 'Sorry $_[0] you are connected to me on another port', concluster => 'Sorry $_[0] you are already connected elsewhere on the cluster (on $_[1])', conscript => 'no connect script called \"$_[0]\" found in $main::root/connect', confail => 'connection to $_[0] failed ($_[1])', constart => 'connection to $_[0] started', deluser => 'User $_[0] has been deleted', db1 => 'This database is hosted at $_[0]', db2 => 'Sorry, but key: $_[0] was not found in $_[1]', db3 => 'Sorry, database $_[0] doesn\'t exist here', db4 => 'Sorry, database $_[0] located at $_[1] isn\'t currently online', db5 => 'Accessing remote database on $_[0]...standby...', db6 => 'Database $_[0] already exists, delete it first', db7 => 'Database $_[0] created for remote node $_[1]', db8 => 'Database $_[0] created locally', db9 => 'Database $_[0] removed', db10 => '$_[0] records imported into $_[1]', db11 => 'Sending your request(s) to $_[0], please stand by...', dfreq1 => 'Invalid freq $_[0] need: eg 0/30000 or hf or hf/cw', dir1 => 'No messages found', disc1 => 'Disconnected by $_[0]', disc2 => 'Channel $_[0] disconnected', disc3 => 'No Channel, but connection $_[0] disconnected', disc4 => 'No Channel or connection but orphan $_[0] disconnected', done => 'Done', dup => 'Sorry, this is a duplicate', dx1 => 'Frequency $_[0] not in band (see show/band); usage: DX [BY call] freq call comments', dx2 => 'Need a callsign; usage: DX [BY call] freq call comments', dx3 => 'The callsign or frequency is invalid', dxs => 'DX Spots flag set on $_[0]', dxu => 'DX Spots flag unset on $_[0]', e1 => 'Invalid command', e2 => 'Error: $_[0]', e3 => '$_[0]: $_[1] not found', e4 => 'Need at least a prefix or callsign', e5 => 'Not Allowed', e6 => '*** No station specified ***', e7 => 'callsign $_[0] not visible on the cluster', e8 => 'Need a callsign and some text', e9 => 'Need at least some text', e10 => '$_[0] not connected locally', e11 => 'Can\'t use $main:mycall as target', e12 => 'Need a node callsign', e13 => '$_[0] is not a node', e14 => 'First argument must be numeric and > 0', e15 => 'invalid qualifier \"$_[0]\"', e16 => 'File \"$_[0]\" exists', e17 => 'Please don\'t use the words: @_ on here', e18 => 'Cannot connect to $_[0] ($!)', e19 => 'Invalid character in line', e20 => 'token $_[0] not recognised', e21 => '$_[0] not numeric', e22 => '$_[0] not a callsign', e23 => '$_[0] not a range (eg 0/30000)', e24 => 'Sorry, Internet access is not enabled', e25 => 'Sorry the value must be between $_[0] and $_[1]', e26 => 'Too many concurrent errors, you are being disconnected', e27 => '$_[0] not a numeric or a callsign prefix', e28 => 'Sorry, you need to be registered (SP $main::myalias to register)', e29 => 'Need a password', echoon => 'Echoing enabled', echooff => 'Echoing disabled', echow => '*Echoing is currently disabled, set/echo to enable', emaile1 => 'Please enter your email address, set/email ', emaila => 'Your E-Mail Address is now \"$_[0]\"', email => 'E-mail address set to: $_[0]', export1 => 'usage: export ', export2 => '$_[3] has error exporting msg $_[0] to $_[1] ($_[2])', export3 => '$_[2 ] exported msg $_[0] to $_[1]', filter1 => 'Filter $_[0] updated for $_[1]', filter2 => 'Unknown filter keyword $_[0]', filter3 => 'No filters defined for $_[0]', filter4 => '$_[0]$_[1] Filter $_[2] deleted for $_[3]', filter5 => 'need some filter commands...', filter6 => '$_[0]$_[1] Filter for $[2] not found', grids => 'DX Grid flag set on $_[0]', gridu => 'DX Grid flag unset on $_[0]', illcall => 'Sorry, $_[0] is an invalid callsign', hasha => '$_[0] already exists in $_[1]', hashb => '$_[0] added to $_[1]', hashc => '$_[0] removed from $_[1]', hashd => '$_[0] not in $_[1]', hashe => '$_[0] set on $_[1]', helpe1 => 'Help system unavailable, tell sysop', helpe2 => 'No help available on $_[0]', heres => 'Here set on $_[0]', heade1 => 'Using $main::mycall Coords, consider doing a set/location or set/qra', hereu => 'Here unset on $_[0]', homebbs => 'Home BBS set to: $_[0]', homenode => 'Home Node set to: $_[0]', hnodee1 => 'Please enter your Home Node, set/homenode ', hnodee2 => 'Failed to set homenode on $_[0]', hnode => 'Your Homenode is now \"$_[0]\"', init1 => 'sent initialisation message to $_[0]', iso => '$_[0] Isolated', isou => '$_[0] UnIsolated', isoc => '$_[0] created and Isolated', isoari => 'there is an input route filter for $_[0]; clear/route input $_[0] first', isoaro => 'there is an output route filter for $_[0]; clear/route $_[0] first', isow => '$_[0] is isolated; unset/isolate $_[0] first', l1 => 'Sorry $_[0], you are already logged on on another channel', l2 => 'Hello $_[0], this is $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build', lang => 'Language is now $_[0]', lange1 => 'set/language where is one of ($_[0])', lange2 => 'failed to set language on $_[0]', lh1 => '$main::data/hop_table.pl doesn\'t exist', loce1 => 'Please enter your location,, set/location ', loce2 => 'Don\'t recognise \"$_[0]\" as a Lat/Long (eg 52 20 N 0 16 E)', loce3 => '$_[0] is a QRA locator, please use: set/qra $_[0]', loc => 'Your Lat/Long is now \"$_[0]\"', lockout => '$_[0] Locked out', lockoutc => '$_[0] Created and Locked out', lockoutun => '$_[0] Unlocked', lockoutuse => 'usage: sh/lockout |ALL', loginu => 'User $_[0] has logged in', logoutu => 'User $_[0] has logged out', loginn => 'Node $_[0] has logged in', logoutn => 'Node $_[0] has logged out', m1 => 'Enter Subject (30 characters):', m2 => 'Copy of msg $_[0] sent to $_[1]', m3 => 'Sorry, $_[0] is an unacceptable TO address', m4 => 'Sorry, can\'t access message $_[0]', m5 => 'Sorry, I need a message number', m6 => 'Reply to: $_[0]', m7 => 'Subject : $_[0]', m8 => 'Enter Message /EX to send or /ABORT to exit', m9 => 'New mail has arrived for you', m10 => 'Message Aborted', m11 => 'Message no $_[0] saved and directed to $_[1]', m12 => 'Message no $_[0] deleted', m13 => 'Message no $_[0] missing', m14 => 'Message no $_[0] marked as sent to $_[1]', m15 => 'Message no $_[0] unmarked as sent to $_[1]', m16 => 'Need a Message number', m17 => 'Sorry, cannot send messages in $_[0] mode', msg1 => 'Bulletin Messages Queued', msg2 => 'Private Messages Queued', msg3 => 'Msg $_[0]: $_[1] changed from $_[2] to $_[3]', msgu => 'usage: msg data...', merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]', moon => 'Location dd/mm/yyyy Rise Set', moon_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev', mond => 'Monitoring Disabled', mone => 'Monitoring Enabled', namee1 => 'Please enter your name, set/name ', namee2 => 'Can\'t find user $_[0]!', name => 'Your name is now \"$_[0]\"', nodea => '$_[0] set as AK1A style Node', nodeac => '$_[0] created as AK1A style Node', nodeb => '$_[0] set as BBS', nodebc => '$_[0] created as BBS', nodec => '$_[0] set as CLX style Node', nodecc => '$_[0] created as CLX style Node', noder => '$_[0] set as AR-Cluster style Node', noderc => '$_[0] created as AR-Cluster style Node', nodes => '$_[0] set as DXSpider style Node', nodesc => '$_[0] created as DXSpider style Node', nodex => '$_[0] set as DXNET style Node', nodexc => '$_[0] created as DXNET style Node', nodeu => '$_[0] set back as a User', nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line', notdone => 'NOT Done', nothere => 'Sorry, but $_[0] isn\'t here at the moment, please try later', obscount => 'Ping obsolescence count on $_[0] set to $_[1]', ok => 'Operation successful', outconn => 'Outstanding connect to $_[0]', page => 'Press Enter to continue, A to abort ($_[0] lines) >', pagelth => 'Page Length is now $_[0]', passerr => 'Please use: SET/PASS ', password => 'Password set or changed for $_[0]', passwordu => 'Password removed for $_[0]', pingo => 'Ping Started to $_[0]', pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs', pinge1 => 'Cannot ping yourself!', pingint => 'Ping interval on $_[0] set to $_[1] secs', 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]', pr => '$_[0] de $main::mycall $_[1] $_[2] >', pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >', priv => 'Privilege level changed on $_[0]', prx => '$main::mycall >', pw0 => 'Enter old password: ', pw1 => 'Enter new password: ', pw2 => 'Re-enter new password: ', pw3 => 'Password changed', pw4 => 'Passwords differ, password NOT changed', qll => 'Please enter your location with set/location or set/qra', qthe1 => 'Please enter your QTH, set/qth ', qth => 'Your QTH is now \"$_[0]\"', qrae1 => 'Please enter your QRA locator, set/qra (eg set/qra JO02LQ)', qrashe1 => 'Please enter a QRA locator, eg sh/qra JO02LQ or sh/qra JO02LQ IO93NS', qrae2 => 'Don\'t recognise \"$_[0]\" as a QRA locator (eg JO02LQ)', qra => 'Your QRA Locator is now \"$_[0]\"', rcmdo => 'RCMD \"$_[0]\" sent to $_[1]', read1 => 'Sorry, no new messages for you', read2 => 'Msg $_[0] not found', read3 => 'Msg $_[0] not available', rec => '$_[0] records', reg => '$_[0] registered', regc => '$_[0] created and registered', reginac => 'Registration is not active (set/var \$main::reqreg = 1 to activate)', regun => '$_[0] unregistered', route => '$_[0] on $_[1] via $_[2]', sat1 => 'Tracking Table for $_[0] for the next $_[1] hours every $_[2] mins', sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', sat3 => 'Syntax: SH/SAT [ ]', sat4 => 'Satellites available:-', satnf => 'Satellite $_[0] unknown', satdisc => '-----', sethop1 => 'usage: set/hops ann|spots|wwv|wcy ', sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]', sethop3 => 'No hops set for $_[0]', shutting => '$main::mycall shutting down...', sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm', snode1 => 'Node Call Sort Version', snode2 => '$_[0] $_[1] $_[2]', snode3 => '$_[0] Unknown Call', sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm', sorry => 'Sorry', spf1 => 'spoof: creating new user $_[0]', stathf => 'HF DX Spot Stats, last 31 days', stathft => 'HF DX Spot Stats, last 31 days for DXCC $_[0]', statvhf => 'VHF+ DX Spot Stats, last 31 days', statvhft => 'VHF+ DX Spot Stats, last 31 days for DXCC $_[0]', statdx => 'Total DX Spots last 31 days', sun => 'Location dd/mm/yyyy Rise Set', sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev', suser1 => 'usage: callsign user_field_name value', suser2 => 'User $_[0] not found', suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'', suser4 => 'User field name \'$_[0]\' doesn\'t exist', time1 => 'Local Time: $_[0] $_[1], UTC $_[2]', time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Hours)', time3 => '$_[0] $_[1]', talks => 'Talk flag set on $_[0]', talku => 'Talk flag unset on $_[0]', talkend => 'Finished talking to you', talkinst => 'Entering Talkmode, /EX to end, / to run a command', talknh => 'Sorry $_[0] is not online at the moment', talkprompt => 'Talk ($_[0])>', talkstart => 'Starting talking to you', unsethop1 => 'usage: unset/hops ann|spots|wwv|wcy', unsethop2 => 'hops unset on $_[1] for $_[0]', usernf => '*** User record for $_[0] not found ***', wcy1 => '$_[0] is missing or out of range', wcy2 => 'Duplicate WCY', wwvs => 'WWV flag set on $_[0]', wwvu => 'WWV flag unset on $_[0]', wxs => 'WX flag set on $_[0]', wxu => 'WX flag unset on $_[0]', }, nl => { addr => 'Addres gezet op: $_[0]', already => '$_[0] reeds geconnect', anns => 'Announce berichten AAN gezet voor $_[0]', annu => 'Announce berichten UIT gezet voor $_[0]', bbse1 => 'Geef je home bbs (mailbox),, set/bbs ', bbs => 'Je home bbs (mailbox) is nu \"$_[0]\"', beepoff => 'De beep staat nu UIT', beepon => 'De beep staat nu AAN', conother => 'Sorry $_[0] je bent reeds geconnect op een andere poort', concluster => 'Sorry $_[0] je bent reeds op een ander cluster geconnect', conscript => 'Geen connectscript aangeroepen \"$_[0]\" gevonden in $main::root/connect', confail => 'Verbinding met $_[0] mislukt ($_[1])', constart => 'Verbinding met $_[0] gestart', disc1 => 'Gedisconnect door $_[0]', disc2 => '$_[0] gedisconnect', dx1 => 'Frequentie $_[0] valt niet binnen een band [Opdracht: DX freq call commentaar](Zie sh/band)', dx2 => 'Ik heb een call nodig! [Opdracht: DX freq call commentaar]', dxs => 'DX Spots worden WEL doorgegeven aan $_[0]', dxu => 'DX Spots worden NIET doorgegeven aan $_[0]', e1 => 'Ongeldige opdracht', e2 => 'Fout: $_[0]', e3 => '$_[0]: $_[1] niet gevonden', e4 => 'Minimaal een prefix of een call nodig', e5 => 'Niet toegestaan', e6 => '*** Geen station gespecifiseerd ***', e7 => 'Callsign $_[0] is niet zichtbaar op het cluster', e8 => 'Ik heb een call en tekst nodig', e9 => 'Ik heb wel tekst nodig voor een announce!', e10 => '$_[0] is niet lokaal verbonden', e12 => 'Ik heb een node call nodig', e13 => '$_[0] is geen node', emaile1 => 'Geef uw E-mail addres, set/email ', emaila => 'Uw E-Mail addres is nu \"$_[0]\"', email => 'E-mail addres gezet op: $_[0]', helpe1 => 'Help systeem niet beschikbaar, meld dit aan de sysop', helpe2 => 'Geen help beschikbaar over \"$_[0]\"', heres => 'Aanwezigheid AAN gezet voor $_[0]', heade1 => 'Gebruik gemaakt van de $main::mycall coordinaten, overweeg een set/location of set/qra', hereu => 'Aanwezigheid UIT gezet voor $_[0]', homebbs => 'Uw Home mailbox is nu $_[0]', homenode => 'Uw (Home) DX-Cluster is : $_[0]', hnodee1 => 'Geef mij uw lokale (home) DX-cluster, set/homenode ', hnode => 'Uw (home) DX-cluster is nu \"$_[0]\"', iso => '$_[0] is geisoleerd (Isolated)', isou => '$_[0] is niet meer geisoleerd (UnIsolated)', isoc => '$_[0] gecreerd en geisoleerd (Isolated)', l1 => 'Sorry $_[0], u bent reeds op een ander kanaal ingelogt', l2 => 'Hallo $_[0], dit is $main::mycall in $main::myqth met DXSpider V$main::version', lh1 => '$main::data/hop_table.pl bestaat niet', loce1 => 'Geef uw coordinaten met, set/location ', loce2 => 'Herken \"$_[0]\" niet als Lat/Long (vb 52 20 N 0 16 E)', loc => 'Uw Latitude en Longitude zijn nu \"$_[0]\"', lockout => '$_[0] heeft geen toegang meer (Locked out)', lockoutun => '$_[0] heeft wederom toegang (Unlocked)', m2 => '$_[0] Informatie: $_[1]', merge1 => 'Merge verzoek voor $_[1] spots en $_[2] WWV verzonden naar $_[0]', msgnew => 'Er is nieuwe post gearriveerd voor u', namee1 => 'Geef aub uw naam met, set/name ', namee2 => 'Gebruiker $_[0] niet te vinden!', name => 'Uw naam is gezet op \"$_[0]\"', node => '$_[0] gezet als een AK1A stijl DX-cluster', nodeu => '$_[0] teruggezet naar gebruiker status', nodec => '$_[0] gecreeerd als AK1A stijl DX-cluster', nodee1 => 'U kunt deze opdracht niet uitvoeren zolang ($_[0]) on-line is', ok => 'Opdracht succesvol uitgevoerd', page => 'Druk op Enter om door te gaan, A om af te breken (nog $_[0] regels) >', pagelth => 'Paginalengte gezet op ($_[0]) regels', passerr => 'Gebruik: SET/PASS ', password => 'Wachtwoord gezet of gewijzigd voor $_[0]', pingo => 'Ping gestart naar $_[0]', pingi => 'Ping ontvangen van $_[0] $_[1] (Ave $_[2]) secs', pr => '$_[0] de $main::mycall $_[1] $_[2] >', pr2 => '($_[0]) de $main::mycall $_[1] $[2] >', priv => 'Privilege level gewijzigd op $_[0]', prx => '$main::mycall >', qll => 'Geef uw locator met set/location of set/qra', qthe1 => 'Geef uw woonplaats met, set/qth ', qth => 'Uw QTH is nu \"$_[0]\"', qrae1 => 'Geef uw QRA locator, set/qra (vb set/qra JO33FD)', qrashe1 => 'Geef uw QRA locator, vbg sh/qra JO33FD of sh/qra JO33FD IO93NS', qrae2 => 'Ik herken \"$_[0]\" niet als een QRA locator (vb JO33FD)', qra => 'Uw QRA Locator is nu \"$_[0]\"', rcmdo => 'RCMD \"$_[0]\" verzonden naar $_[1]', read1 => 'Sorry, geen berichten voor u', read2 => 'Bericht $_[0] niet gevonden', read3 => 'Bericht $_[0] niet beschikbaar', shutting => '$main::mycall gaat QRT...', sloc => 'Cluster lat $_[0] long $_[1], DON\'T FORGET TO CHANGE YOUR DXVars.pm', sqra => 'Cluster QRA Locator$_[0], DON\'T FORGET TO CHANGE YOUR DXVars.pm', talks => 'Talk berichten AAN gezet voor $_[0]', talku => 'Talk berichten UIT gezet voor $_[0]', usernf => '*** Gebruiker info van $_[0] niet gevonden ***', wwvs => 'WWV berichten AAN gezet voor $_[0]', wwvu => 'WWV berichten UIT gezet voor $_[0]', wxs => 'WX berichten AAN gezet voor $_[0]', wxu => 'WX berichten UIT gezet voor $_[0]', }, fr => { }, es => { addr => 'Dirección es ahora: $_[0]', already => '$_[0] ya esta conectado', anns => 'Anuncios activados $_[0]', annu => 'Anuncios desactivados $_[0]', annts => 'AnnTalk activados $_[0]', anntu => 'AnnTalk desactivados $_[0]', badnode1 => '$_[0] es ahora un nodo indeseado', badnode2 => '$_[0] es ahora un nodo normal', badnode3 => 'Lista de nodos indeseados:-', bbse1 => 'Por favor introduce la dirección de tu BBS,, set/bbs ', bbs => 'Tu BBS es ahora \"$_[0]\"', beepoff => 'Beeps desactivados', beepon => 'Beeps activados', call1 => 'Callsign lookup via $_[0]:', conother => 'Lo siento $_[0] ya estás conectado en otro puerto', concluster => 'Lo siento $_[0] ya estás conectado en otro cluster', conscript => 'no hay ningún script que se llame \"$_[0]\" en $main::root/connect', confail => 'conexión con $_[0] fallida ($_[1])', constart => 'conexión con $_[0] ha comenzado', deluser =>'El usuario $_[0] ha sido borrado', db1 => 'Esta base de datos está en $_[0]', db2 => 'Lo siento, pero la palabra: $_[0] no se encontró en $_[1]', db3 => 'Lo siento, la base de datos $_[0] no existe aquí', db4 => 'Lo siento, la base de datos $_[0] situada en $_[1] no se encuentra disponible', db5 => 'Accediendo a la base de datos remota $_[0]...espere...', db6 => 'Base de datos $_[0] ya existe, bórrala primero', db7 => 'Base de datos $_[0] creada para el nodo remoto $_[1]', db8 => 'Base de datos $_[0] creada localmente', db9 => 'Base de datos $_[0] borrada', db10 => '$_[0] registros importados para $_[1]', db11 => 'Petición enviada a $_[0], por favor espera...', dfreq1 => 'Frecuencia inválida $_[0] se necesita: ej 0/30000 o hf o hf/cw', dir1 => 'No se encontró el mensage', disc1 => 'Desconectado por $_[0]', disc2 => '$_[0] desconectado', disc3 => 'No Channel, but connection $_[0] disconnected', disc4 => 'No Channel or connection but orphan $_[0] disconnected', done => 'Hecho', dup => 'Lo siento, esto es un duplicado', dx1 => 'Frecuencia $_[0] fuera de banda (ver show/band); usa: DX [BY indicativo] frec indic. comentario', dx2 => 'Necesita indicativo; usa: DX [BY indicativo] frec indic. comentario', dx3 => 'El indicativo o la frecuencia es incorrecta', dxs => 'DX Spots activado $_[0]', dxu => 'DX Spots desactivado $_[0]', e1 => 'Comando inválido', e2 => 'Error: $_[0]', e3 => '$_[0]: $_[1] no encontrado', e4 => 'Se necesita, por lo menos, un prefijo o indicativo', e5 => 'No permitido', e6 => '*** No se ha especificado una estación ***', e7 => 'indicativo $_[0] no visible en el cluster', e8 => 'Se necesita un indicativo y algo de texto', e9 => 'Se necesita al menos algo de texto', e10 => '$_[0] no conectado en local', e11 => 'Can\'t use $main:mycall as target', e12 => 'Se necesita el indicativo del nodo', e13 => '$_[0] no es un nodo', e14 => 'El primer argumento debe de ser mumérico y > 0', e15 => 'cualificador no válido \"$_[0]\"', e16 => 'El fichero \"$_[0]\" ya existe', e17 => 'Por favor no uses la palabra: @_ aqui', e18 => 'No se puede conectar con $_[0] ($!)', e19 => 'Caracter inválido en la linea', e20 => 'señal $_[0] no reconocido', e21 => '$_[0] no numérico', e22 => '$_[0] no es un indicativo', e23 => '$_[0] fuera de rango (ej: 0/30000)', e24 => 'Lo siento, el acceso a internet no está habilitado', e25 => 'Lo siento el valor debe de estar entre $_[0] y $_[1]', e26 => 'Demasiados errores, serás desconectado', e27 => '$_[0] no es un numero o un prefijo', e28 => 'Lo siento, necesitas registrarte (SP $main::myalias para registrarte)', e29 => 'Necesitas password', echoon => 'Habilitado eco', echooff => 'Deshabilitado eco', echow => '*Eco está ahora deshabilitado, set/echo para habilitar', emaile1 => 'Por favor introduce tu E-mail, set/email ', emaila => 'Tu dirección de E-Mail es ahora \"$_[0]\"', email => 'E-mail es ahora: $_[0]', export1 => 'usa: export ', export2 => '$_[3] hubo un error exportando msg $_[0] to $_[1] ($_[2])', export3 => '$_[2 ] exportando msg $_[0] to $_[1]', filter1 => 'Filtro $_[0] actualizado para $_[1]', filter2 => 'Necesito un valor para $_[0]', filter3 => 'No hay filtros definidos para $_[0]', filter4 => '$_[0]$_[1] Filtros $_[2] borrados para $_[3]', filter5 => 'necesito algunos camandos para el filtro...', filter6 => '$_[0]$_[1] Filtro para $[2] no encontrado', grids => 'DX Grid está activado $_[0]', gridu => 'DX Grid está desavtivado $_[0]', illcall => 'Lo siento,$_[0] no es un indicativo válido', hasha => '$_[0] ya existe en $_[1]', hashb => '$_[0] añadido a $_[1]', hashc => '$_[0] eliminado desde $_[1]', hashd => '$_[0] no en $_[1]', hashe => '$_[0] activado $_[1]', helpe1 => 'La ayuda no esta disponible, avisa al sysop', helpe2 => 'No hay ayuda disponible en $_[0]', heres => 'Estás presente $_[0]', heade1 => 'Usando $main::mycall Coords, se recomienda usar set/location o set/qra', hereu => 'Estás ausente $_[0]', homebbs => 'Tu BBS es ahora: $_[0]', homenode => 'Tu Nodo habitual es ahora: $_[0]', hnodee1 => 'Por favor introduce tu nodo local, set/homenode ', hnodee2 => 'Fallo al poner homenode en $_[0]', hnode => 'Tu nodo habitual es ahora \"$_[0]\"', init1 => 'enviando mensaje de inicialización a $_[0]', iso => '$_[0] Aislado', isou => '$_[0] en red', isoc => '$_[0] creado y aislado', isoari => 'Ya hay un input route filter para $_[0]; clear/route input $_[0] primero', isoaro => 'Ya hay un output route filter para $_[0]; clear/route $_[0] primero', isow => '$_[0] está aislado; unset/isolate $_[0] primero', l1 => 'Lo siento $_[0], ya estás conectado en otro canal', l2 => 'Hola $_[0], este es $main::mycall en $main::myqth usando DXSpider V$main::version', lang => 'El idioma es ahora $_[0]', lange1 => 'set/language cuando es uno de ($_[0])', lange2 => 'fallo al poner idioma en $_[0]', lh1 => '$main::data/hop_table.pl no existe', loce1 => 'Por favor introduce tu posición, set/location ', loce2 => 'No reconocida \"$_[0]\" como una Lat/Long (eg 52 20 N 0 16E)', loce3 => '$_[0] es un QRA locator, por favor usa: set/qra $_[0]', loc => 'Tu Lat/Long es ahora \"$_[0]\"', lockout => '$_[0] Boloqueado', lockoutc => '$_[0] Creado y bloqueado', lockoutun => '$_[0] Desbloqueado', lockoutuse => 'usa: sh/lockout |ALL', loginu => 'Usuario $_[0] conectado', logoutu => 'Usuario $_[0] desconectado', loginn => 'Nodo $_[0] conectado', logoutn => 'Nodo $_[0] desconectado', m1 => 'Introduce título (30 caracteres):', m2 => 'Copia del mensaje $_[0] enviada a $_[1]', m3 => 'Lo siento, $_[0] no se puede enviar TO dirección', m4 => 'Lo siento, no puedo acceder al mensaje $_[0]', m5 => 'Lo siento, se necesita un número de mensaje', m6 => 'Reenviado a: $_[0]', m7 => 'Título : $_[0]', m8 => 'Introduce mensaje /EX para enviar o /ABORT para salir', m9 => 'Hay correo nuevo para ti.Borralo una vez leido.', m10 => 'mensaje interrumpido', m11 => 'mensaje nr $_[0] guardado y enviado a $_[1]', m12 => 'mensaje nr $_[0] borrado', m13 => 'mensaje nr $_[0] no encontrado', m14 => 'mensaje nr $_[0] marcado para enviar a $_[1]', m15 => 'mensaje nr $_[0] desmarcado para ser enviado a $_[1]', m16 => 'Necesito un número de mensaje', m17 => 'Lo siento, no puedo enviar el mensaje en $_[0] modo', msg1 => 'Bulletin Messages Queued', msg2 => 'Private Messages Queued', msg3 => 'Msg $_[0]: $_[1] cambiado en $_[2] to $_[3]', msgu => 'usa: msg data...', merge1 => 'Petición de envío desde $_[1] spots y $_[2] WWV enviados a $_[0]', moon => 'QTH dd/mm/yyyy Salida Puesta', moon_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev', mond => 'Monitorado deshabilitado', mone => 'Monitorado habilitado', namee1 => 'Por favor, introduce tu nombre set/name ', namee2 => 'No se encuentra el usuario $_[0]!', name => 'Tu nombre es ahora \"$_[0]\"', nodea => '$_[0] fijado como nodo AK1A ', nodeac => '$_[0] creado como nodo AK1A ', nodeb => '$_[0] fijado como BBS', nodebc => '$_[0] creado como BBS', nodec => '$_[0] fijado como nodo CLX ', nodecc => '$_[0] creado como nodo CLX ', noder => '$_[0] fijado como nodo AR-Cluster ', noderc => '$_[0] creado como nodo AR-Cluster ', nodes => '$_[0] fijado como nodo DXSpider ', nodesc => '$_[0] creado como nodo DXSpider ', nodex => '$_[0] fijado como nodo DXNET ', nodexc => '$_[0] creado como nodo DXNET ', nodeu => '$_[0] es ahora un usuario', nodee1 => 'You cannot use this command whilst your target ($_[0]) is on-line', notdone => 'NO se pudo hacer', nothere => 'Lo siento, pero $_[0] no esta aqui ahora, intentalo mas tarde', obscount => 'Ping obsolescence count on $_[0] set to $_[1]', ok => 'Operación realizada', outconn => 'Iniciando conexion con $_[0]', page => 'Teclea Enter para continuar, A para abortar ($_[0] lineas) >', pagelth => 'La longitud de las páginas es ahora $_[0]', passerr => 'Por favor usa: SET/PASS ', password => 'Password ajustado o cambiado para $_[0]', pingo => 'Iniciado el ping a $_[0]', pingi => 'Retorno del ping desde $_[0] $_[1] (Ave $_[2]) secs', pinge1 => 'No puedes enviarte un ping a ti mismo!', pingint => 'Intervalo de ping en $_[0] ajustado para $_[1] segundos', 'pos' => 'From Callsign: $_[0] Lat: $_[1] Long: $_[2]', pr => '$_[0] de $main::mycall $_[1] $_[2] >', pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >', priv => 'Nivel de privilegios en $_[0]', prx => '$main::mycall >', pw0 => 'Teclea el password antiguo: ', pw1 => 'Teclea el password nuevo: ', pw2 => 'Teclea otra vez el password nuevo: ', pw3 => 'Password cambiado', pw4 => 'Los passwords no coinciden, NO se han cambiado', qll => 'Por favor introduce tu locator con set/location o set/qra', qthe1 => 'Por favor introduce tu QTH, set/qth ', qth => 'Tu QTH es ahora \"$_[0]\"', qrae1 => 'Por favor introduce tu QRA locator, set/qra (ej: set/qra JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej sh/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No reconocido \"$_[0]\" como un QRA locator (ej JO02LQ)', qrashe1 => 'Por favor introduce un QRA locator, ej set/qra JO02LQ o sh/qra JO02LQ IO93NS', qrae2 => 'No se reconocio \"$_[0]\" como un QRA locator ( ej JO02LQ)', qra => 'Tu QRA Locator es ahora \"$_[0]\"', rcmdo => 'RCMD \"$_[0]\" enviado a $_[1]', read1 => 'Lo siento, no hay mensajes nuevos para ti', read2 => 'Msg $_[0] no encontrado', read3 => 'Msg $_[0] no disponible', rec => '$_[0] registros', reg => '$_[0] registrado', regc => '$_[0] creado y registrado', reginac => 'El registro no está activ (set/var \$main::regreq = 1 para activarlo)', regun => '$_[0] borrado', route => '$_[0] en $_[1] via $_[2]', sat1 => 'Tabla de seguimiento $_[0] para las proximas $_[1] horas cada $_[2] minutos', sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', sat3 => 'Sintaxis: SH/SAT [ ]', sat4 => 'Satélites disponibles:-', satnf => 'Satélite $_[0] desconocido', satdisc => '-----', sethop1 => 'usa: set/hops ann|spots|wwv|wcy ', sethop2 => '$_[0] hops set on $_[1]$_[2] for $_[3]', sethop3 => 'No hay hops definidos para $_[0]', shutting => '$main::mycall shutting down...', sloc => 'Cluster lat $_[0] long $_[1], NO OLVIDES CAMBIAR TU DXVars.pm', snode1 => 'Nodo Call Sort Version', snode2 => '$_[0] $_[1] $_[2]', snode3 => '$_[0] Indicativo desconocido', sqra => 'Cluster QRA Locator$_[0], NO OLVIDES CAMBIAR TU DXVars.pm', sorry => 'Lo siento', spf1 => 'spoof: creando nuevo usuario $_[0]', stathf => 'Estadísticas de spots en HF de los últimos 31 dias', stathft => 'Estadísticas de spots en HF de los últimos 31 dias para DXCC $_[0]', statvhf => 'VHF+ DX Spot Stats, ultimos 31 dias', statvhft => 'VHF+ DX Spot Stats, ultimos 31 dias para DXCC $_[0]', statdx => 'Total DX Spots ultimos 31 dias', sun => 'QTH dd/mm/yyyy Salida Puesta', sun_with_azel => 'QTH dd/mm/yyyy Salida Puesta Azim Elev', suser1 => 'usa: indicativo user_field_name value', suser2 => 'Usuario $_[0] no encontrado', suser3 => 'User field \'$_[0]\' was \'$_[1]\' now set to \'$_[2]\'', suser4 => 'User field name \'$_[0]\' doesn\'t exist', time1 => 'Horario local: $_[0] $_[1], UTC $_[2]', time2 => '$_[0] Local (standard) time: $_[1] ($_[2] Horas)', time3 => '$_[0] $_[1]', talks => 'Talk activado $_[0]', talku => 'Talk desactivado $_[0]', talkend => 'Finalizado modo talk contigo', talkinst => 'Entrando en modo talk, /EX para salir, / para ejecutar un comando', talknh => 'Lo siento $_[0] no est conectado en este momento', talkprompt => 'Talk ($_[0])>', talkstart => 'Iniciando modo talk contigo', usernf => '*** User record for $_[0] no encontrado ***', wwvs => 'WWV activado $_[0]', wwvu => 'WWV desactivado $_[0]', wxs => 'WX activado $_[0]', wxu => 'WX desactivado $_[0]', }, de => { addr => 'Adresse gesetzt auf: $_[0]', already => '$_[0] bereits connnected', anns => 'Announce flag gesetzt auf $_[0]', annu => 'Announce flag zurueckgesetzt auf $_[0]', annts => 'AnnTalk flag gesetzt auf $_[0]', anntu => 'AnnTalk flag zurueckgesetzt auf $_[0]', badnode1 => '$_[0] ist nun ein bad node', badnode2 => '$_[0] ist nun ein good node', badnode3 => 'Liste der Bad Nodes:-', bbse1 => 'Bitte die BBS Adresse eingeben,, set/bbs ', bbs => 'Deine BBS Adresse ist nun \"$_[0]\"', beepoff => 'Beeps sind nun aus', beepon => 'Beeps sind nun eingeschaltet', call1 => 'Callsign lookup via $_[0]:', conother => 'Sorry $_[0] Du bist zu mir auf einem anderen Port connected', concluster => 'Sorry $_[0] Du bist schon anderswo in einem Cluster connected (on $_[1])', conscript => 'Kein connect script mit Namen \"$_[0]\" gefunden in $main::root/connect', confail => 'Verbindung zu $_[0] misslungen ($_[1])', constart => 'Verbindung zu $_[0] gestartet', deluser => 'User $_[0] wurde geloescht', db1 => 'Diese Datenbank ist untergebracht bei $_[0]', db2 => 'Sorry, aber Scluesselwort: $_[0] wurde nicht gefunden in $_[1]', db3 => 'Sorry, Datenbank $_[0] existiert hier nicht', db4 => 'Sorry, Datenbank $_[0] untergebracht bei $_[1] ist nicht online', db5 => 'Zugriff auf remote Datenbank bei $_[0]...standby...', db6 => 'Datenbank $_[0] existiert bereits, bitte zuerst loeschen', db7 => 'Datenbank $_[0] angelegt fuer remote Cluster $_[1]', db8 => 'Datenbank $_[0] lokal angelegt', db9 => 'Datenbank $_[0] entfernt', db10 => '$_[0] Datensaetze importiert in $_[1]', db11 => 'Sende Deine Anfrage(n)an $_[0], bitte stand by...', dfreq1 => 'Ungueltige Freq $_[0] brauche: z.B. 0/30000 oder hf oderr hf/cw', dir1 => 'Keine Nachricht gefunden', disc1 => 'Disconnected von $_[0]', disc2 => 'Kanal $_[0] disconnected', disc3 => 'Kein Kanal, aber Verbindung $_[0] disconnected', disc4 => 'Kein Kanal oder Verbindung, aber Waise $_[0] disconnected', done => 'Done', dup => 'Sorry, dies ist ein Duplikat', dx1 => 'Frequenz $_[0] nicht im Band (siehe show/band); Gebrauch: DX [BY call] Freq Call Kommentar', dx2 => 'Brauche ein Rufzeichen; Gebrauch: DX [BY call] Freq Call Kommentar', dx3 => 'Das Rufzeichen oder Frequenz ist ungueltig', dxs => 'DX Spots flag gesetzt auf $_[0]', dxu => 'DX Spots flag zurueckgesetzt auf $_[0]', e1 => 'Ungueltiger Befehl', e2 => 'Fehler: $_[0]', e3 => '$_[0]: $_[1] nicht gefunden', e4 => 'Brauche zumindestens einen Prefix oder ein Rufzeichen', e5 => 'Nicht erlaubt', e6 => '*** Keine Station angegeben ***', e7 => 'Rufzeichen $_[0] nicht sichtbar im Cluster', e8 => 'Brauche ein Rufzeichen und etwas Text', e9 => 'Brauche wenigstens etwas Text', e10 => '$_[0] nicht lokal connected', e11 => 'Kann nicht $main:mein Rufzeichen als Ziel', e12 => 'Brauche ein Node Rufzeichen', e13 => '$_[0] ist kein Node', e14 => 'Erstes Argument muss eine Zahl und > 0 sein', e15 => 'Unguelitges Abfragekriterium \"$_[0]\"', e16 => 'Datei \"$_[0]\" existiert', e17 => 'Bitte gebrauche dieses Wort: @_ nicht hier', e18 => 'Kann nicht verbinden mit $_[0] ($!)', e19 => 'Ungueltiger Character in der Zeile', e20 => 'Kuerzel $_[0] nicht erkannt', e21 => '$_[0] nicht numerisch', e22 => '$_[0] kein Rufzeichen', e23 => '$_[0] kein Bereich (z.B. 0/30000)', e24 => 'Sorry, Internet Zugriff ist nichtfreigeschaltet', e25 => 'Sorry der Wert muss zwischen $_[0] und $_[1] sein', e26 => 'Zu viele Fehler gleichzeitig, Du wirst disconnected', e27 => '$_[0] kein numerisches oder Rufzeichen Prefix', e28 => 'Sorry, Du musst Dich registrieren (SP $main::myalias to register)', e29 => 'Brauche eine Passwort', echoon => 'Echo enabled', echooff => 'Echo disabled', echow => '*Echo ist im moment disabled, set/echo to enable', emaile1 => 'Bitte email Addresse eingeben, set/email ', emaila => 'Deine E-Mail Adresse ist nun \"$_[0]\"', email => 'E-mail Adresse gesetzt auf: $_[0]', export1 => 'Gebrauch: export ', export2 => '$_[3] has error exporting msg $_[0]to $_[1] ($_[2])', export3 => '$_[2 ] exportierte msg $_[0] to $_[1]', filter1 => 'Filter $_[0] upgedated fuer $_[1]', filter2 => 'Unbekanntes Filter Schluesselwort $_[0]', filter3 => 'Keine Filter definiert fuer $_[0]', filter4 => '$_[0]$_[1] Filter $_[2] geloescht fuer$_[3]', filter5 => 'brauche ein paar Filter Kommandos...', filter6 => '$_[0]$_[1] Filter fuer $[2] nicht gefunden', grids => 'DX Grid flag gesetzt auf $_[0]', gridu => 'DX Grid flag zurueckgesetzt auf $_[0]', illcall => 'Sorry, $_[0] ist ein ungueltiges Rufzeichen', hasha => '$_[0] existiert bereits in $_[1]', hashb => '$_[0] zugefuegt zu $_[1]', hashc => '$_[0] entfernt von $_[1]', hashd => '$_[0] nicht in $_[1]', hashe => '$_[0] gesetzt auf $_[1]', helpe1 => 'Hilfe System nicht verfuegbar, bitte Sysop benachrichtigen', helpe2 => 'Keine Hilfe verfuegbar auf $_[0]', heres => 'Hier gesetzt auf $_[0]', heade1 => 'Using $main::mycall Coords, entspricht einem set/location or set/qra', hereu => 'Here zurueckgesetzt auf $_[0]', homebbs => 'Heimat BBS gesetzt auf: $_[0]', homenode => 'Heimat Node gesetzt auf: $_[0]', hnodee1 => 'Bitte Heimat Node eingeben, set/homenode ', hnodee2 => 'Heimat Node setzen ist misslungen $_[0]', hnode => 'Dein Heimat Node ist nun \"$_[0]\"', init1 => 'Initialisierungs Nachricht gesendet an $_[0]', iso => '$_[0] Isoliert', isou => '$_[0] UnIsoliert', isoc => '$_[0] erstellt und Isoliert', isoari => 'Es gibt einen Eingabe Route Filter fuer $_[0]; clear/route input $_[0] zuerst', isoaro => 'Es gibt einen Ausgabe Route Filter fuer $_[0]; clear/route $_[0] zuerst', isow => '$_[0] ist isoliert; unset/isolate $_[0] zuerst', l1 => 'Sorry $_[0], Du bist bereit auf einem anderen Kanal eingeloggt', l2 => 'Moin $_[0], hier ist $main::mycall in $main::myqth\nrunning DXSpider V$main::version build $main::build', lang => 'Sprache ist jetzt $_[0]', lange1 => 'set/language wobei ist eine von ($_[0])', lange2 => 'Fehler beim setzen der Sprache auf $_[0]', lh1 => '$main::data/hop_table.pl existiert nicht', loce1 => 'Bitte Deinen Standort eingeben,, set/location ', loce2 => 'Nicht anerkannt \"$_[0]\" als Lat/Long (z.B. 52 20 N 0 16 E)', loce3 => '$_[0] ist ein QRA Locator, gebrauch: set/qra $_[0]', loc => 'Dein Lat/Long ist nun \"$_[0]\"', lockout => '$_[0] ausgesperrt', lockoutc => '$_[0] erstellt und ausgesperrt', lockoutun => '$_[0] Aussperrung aufgehoben', lockoutuse => 'Gebrauch: sh/lockout |ALL', loginu => 'User $_[0] hat eingeloggt', logoutu => 'User $_[0] hat ausgeloggt', loginn => 'Node $_[0] hat eingeloggt', logoutn => 'Node $_[0] hat ausgeloggt', m1 => 'Subjekt eingeben (30 Zeichen):', m2 => 'Kopie der msg $_[0] gesendet an $_[1]', m3 => 'Sorry, $_[0] ist keine akzeptable TO Adresse', m4 => 'Sorry, kann nicht zugreifen auf Nachricht $_[0]', m5 => 'Sorry, ich brauche eine Nachrichten Nummer', m6 => 'Reply to: $_[0]', m7 => 'Subject : $_[0]', m8 => 'Nachricht eingeben, /EX zum absenden oder /ABORT zum abbrechen', m9 => 'Neue Nachricht(en) fuer Dich', m10 => 'Nachricht abgebrochen', m11 => 'Nachricht Nr. $_[0] gesichert und weitergeleitet an $_[1]', m12 => 'Nachricht Nr. $_[0] geloescht', m13 => 'Nachricht Nr. $_[0] fehlt', m14 => 'Nachricht Nr. $_[0] markiert als gesendet an $_[1]', m15 => 'Nachricht Nr. $_[0] unmarkiert als gesendet an $_[1]', m16 => 'Brauche eine Nachrichten Nummer', m17 => 'Sorry, kann Nachricht nicht senden im $_[0] mode', msg1 => 'Bulletin Nachrichten aufgeschoben', msg2 => 'Private Nachrichten aufgeschoben', msg3 => 'Msg $_[0]: $_[1] geaendert von $_[2] auf $_[3]', msgu => 'Gebrauch: msg data...', merge1 => 'Merge request for $_[1] spots and $_[2] WWV sent to $_[0]', moon => 'Standort dd/mm/yyyy Rise Set', moon_with_azel => 'Standort dd/mm/yyyy Rise Set Azim Elev', mond => 'Ueberwachung Disabled', mone => 'Ueberwachung Enabled', namee1 => 'Bitte Deinen Namen eingeben, set/name ', namee2 => 'Kann User $_[0]nicht finden!', name => 'Dein Name ist jetzt \"$_[0]\"', nodea => '$_[0] gesetzt als AK1A style Node', nodeac => '$_[0] erstellt als AK1A style Node', nodeb => '$_[0] gesetzt als BBS', nodebc => '$_[0] erstellt als BBS', nodec => '$_[0] gesetzt als CLX style Node', nodecc => '$_[0] erstellt als CLX style Node', noder => '$_[0] gesetzt als AR-Cluster style Node', noderc => '$_[0] erstellt als AR-Cluster style Node', nodes => '$_[0] gesetzt als DXSpider style Node', nodesc => '$_[0] erstellt als DXSpider style Node', nodex => '$_[0] gesetzt als DXNET style Node', nodexc => '$_[0] erstellt als DXNET style Node', nodeu => '$_[0] zurueckgesetzt als ein User', nodee1 => 'Du kannst dieses Kommando nicht waehrend Dein Ziel ($_[0]) online ist', notdone => 'Nicht ausgefuehrt', nothere => 'Sorry, aber $_[0] ist nicht hier im Moment, bitte spaeter nocheinmal Versuchen', obscount => 'Ping obsolescence count on $_[0] set to $_[1]', ok => 'Operation erfolgreich', outconn => 'Outstanding connect to $_[0]', page => 'Druecke Enter zum fortfahren, A zum abbrechen ($_[0] lines) >', pagelth => 'Seitenlaenge ist nun $_[0]', passerr => 'Gebrauch: SET/PASS ', password => 'Passwort gesetzt oder geaendert fuer $_[0]', passwordu => 'Passwort geloescht fuer $_[0]', pingo => 'Ping Started to $_[0]', pingi => 'Ping Returned from $_[0] $_[1] (Ave $_[2]) secs', pinge1 => 'Cannot ping yourself!', pingint => 'Ping interval on $_[0] set to $_[1] secs', 'pos' => 'Von Rufzeichen: $_[0] Lat: $_[1] Long: $_[2]', pr => '$_[0] de $main::mycall $_[1] $_[2] >', pr2 => '($_[0]) de $main::mycall $_[1] $_[2] >', priv => 'Priviligierten Level geaendert auf $_[0]', prx => '$main::mycall >', pw0 => 'Altes Passwort eingeben: ', pw1 => 'Neues Passwort eingeben: ', pw2 => 'Wiederhole neues Passwort: ', pw3 => 'Passwort geaendert', pw4 => 'Passwoerter differieren, Passwort NICHT geaendert', qll => 'Bitte gib Deinen QRA Locator ein mit set/location oder set/qra', qthe1 => 'Bitte gib Dein QTH ein mit set/qth ', qth => 'Dein QTH ist nun \"$_[0]\"', qrae1 => 'Bitte gib Deinen QRA Locator ein mit set/qra (z.B. set/qra JO44RK)', qrashe1 => 'Bitte einen QRA Locator eingeben, z.B. sh/qra JO02LQ oder sh/qra JO02LQ IO93NS', qrae2 => 'Erkenne nicht \"$_[0]\" als ein QRA Locator (z.B. JO02LQ)', qra => 'Dein QRA Locator ist nun \"$_[0]\"', rcmdo => 'RCMD \"$_[0]\" gesendet an $_[1]', read1 => 'Sorry, keine neuen Nachrichtenfuer Dich', read2 => 'Msg $_[0] nicht gefunden', read3 => 'Msg $_[0] nicht verfuegbar', rec => '$_[0] records', reg => '$_[0] registriert', regc => '$_[0] erstellt und registriert', reginac => 'Registrierung ist nicht aktiv (set/var \$main::reqreg = 1 to activate)', regun => '$_[0] unregistriert', route => '$_[0] auf $_[1] via $_[2]', sat1 => 'Tracking Tabelle fuer $_[0] fuer den naechsten $_[1] Stunden alle $_[2] mins', sat2 => 'dd/mm UTC Lat Lon Alt Km Az El Dist Km', sat3 => 'Syntax: SH/SAT [ ]', sat4 => 'Satelliten verfuegbar:-', satnf => 'Satellit $_[0] unbekannt', satdisc => '-----', sethop1 => 'Gebrauch: set/hops ann|spots|wwv|wcy ', sethop2 => '$_[0] hops gesetzt auf $_[1]$_[2] fuer $_[3]', sethop3 => 'Keine hops gesetzt fuer $_[0]', shutting => '$main::mycall shutting down...', sloc => 'Cluster lat $_[0] long $_[1], Nicht vergessen die DXVars.pm zu aendern', snode1 => 'Node Call Sort Version', snode2 => '$_[0] $_[1] $_[2]', snode3 => '$_[0] Unbekanntes Rufzeichen', sqra => 'Cluster QRA Locator$_[0], Nicht vergessen die DXVars.pm zu aendern', sorry => 'Sorry', spf1 => 'spoof: erzeuge neuen User $_[0]', stathf => 'HF DX Spot Stats, letzte 31 Tage', stathft => 'HF DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]', statvhf => 'VHF+ DX Spot Stats, letzte 31 Tage', statvhft => 'VHF+ DX Spot Stats, letzte 31 Tage fuer DXCC $_[0]', statdx => 'Total DX Spots letzte 31 Tage', sun => 'Location dd/mm/yyyy Rise Set', sun_with_azel => 'Location dd/mm/yyyy Rise Set Azim Elev', suser1 => 'Gebrauch: Rufzeichen user_field_name value', suser2 => 'User $_[0] nicht gefunden', suser3 => 'User Feld \'$_[0]\' war \'$_[1]\' nun gesetzt auf \'$_[2]\'', suser4 => 'User Feld name \'$_[0]\' existiert nicht', time1 => 'Lokala Zeit: $_[0] $_[1], UTC $_[2]', time2 => '$_[0] Lokale (standard) Zeit: $_[1] ($_[2] Stunden)', time3 => '$_[0] $_[1]', talks => 'Talk flag gesetzt auf $_[0]', talku => 'Talk flag zurueckgesetzt auf $_[0]', talkend => 'Beendet Talk zu Dir', talkinst => 'Talkmode, /EX zum beenden, / um ein Kommando auszufuehren', talknh => 'Sorry $_[0] ist im moment nicht online', talkprompt => 'Talk ($_[0])>', talkstart => 'Startet Talkmode zu Dir', usernf => '*** User Satz fuer $_[0] nicht gefunden ***', wwvs => 'WWV flag gesetzt auf $_[0]', wwvu => 'WWV flag zurueckgesetzt auf $_[0]', wxs => 'WX flag gesetzt auf $_[0]', wxu => 'WX flag zurueckgesetzt auf $_[0]', }, );