+
+ real or rt - Format the output the same as for real time spots. The formats are deliberately different (so you can tell one sort from the other). This is useful for some logging programs that can't cope with normal sh/dx output. An alias of SHOW/FDX is available.
+
+
+
+ filter - Filter the spots, before output, with the user's spot filter. An alias of SHOW/MYDX is available.
+
+
+
+ zone <zones> - look for spots in the cq zone (or zones) specified. zones are numbers separated by commas.
+
+
+
+ by_zone <zones> - look for spots spotted by people in the cq zone specified.
+
+
+
+ itu <itus> - look for spots in the itu zone (or zones) specified itu zones are numbers separated by commas.
+
+
+
+ by_itu <itus> - look for spots spotted by people in the itu zone specified.
+
+
+
+ state <list> - look for spots in the US state (or states) specified The list is two letter state codes separated by commas.
+
+
+
+ by_state <list> - look for spots spotted by people in the US state specified.
+
+
e.g.
- SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 SH/DX rf1p qsl SH/DX iota SH/DX iota eu-064 SH/DX qra jn86 SH/DX dxcc oq2 SH/DX dxcc oq2 by w dxcc
+ SH/DX 9m0 SH/DX on 20m info iota SH/DX 9a on vhf day 30 SH/DX rf1p qsl SH/DX iota SH/DX iota eu-064 SH/DX qra jn86 SH/DX dxcc oq2 SH/DX dxcc oq2 by w dxcc SH/DX zone 4,5,6 SH/DX by_zone 4,5,6 SH/DX state in,oh SH/DX by_state in,oh
show/dxstats [days] [date] Show the DX Statistics
Show the total DX spots for the last <days> no of days (default is 31), starting from a <date> (default: today).
-show/fdx Show the DX data in realtime format.
Normally SHOW/DX outputs spot data in a different format to therealtime data. This is a deliberate policy (so you can tell the difference between the two). Some logging programs cannot handlethis so SHOW/FDX outputs historical data in real time format.This is an alias for: SHOW/DX real
+show/files [<filearea> [<string>]] List the contents of a filearea
show/filter Show the contents of all the filters you have set
Show the contents of all the filters that are set. This command displaysall the filters set - for all the various categories.
-show/hfstats [days] [date] Show the HF DX Statistics
Show the HF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a <date> (default: today).
-show/hftable [days] [date] [prefix ...] Show the HF DX Spotter Table
show/hops <call> [ann|spots|route|wcy|wwv] Show the hop counts for a node
This command shows the hop counts set up for a node. You can specifywhich category you want to see. If you leave the category out then all the categories will be listed.
-show/isolate Show list of ISOLATED nodes
show/lockout <prefix>|all Show the list of locked out or excluded callsigns
show/log [<callsign>] Show excerpts from the system log
This command outputs a short section of the system log. On its ownit will output a general logfile. With the optional callsign it willshow output from the log associated with that callsign.
-show/moon [ndays] [<prefix>|<callsign>] Show Moon rise and set times
show/muf <prefix> [<hours>][long] Show the likely propagation to a prefix
show/mydx Show the DX data filtered with your spot filter.
SHOW/DX potentially shows all the spots available in the system. UsingSHOW/MYDX will, instead, filter the availble spots using any spot filter that you have set, first. This command, together with ACCEPT/SPOT or REJECT/SPOT, will allowyou to customise the spots that you receive.So if you have said: ACC/SPOT on hfDoing a SHOW/MYDX will now only, ever, show HF spots. All the other options on SH/DX can still be used.
+show/newconfiguration [<node>] Show all the nodes and users visible
This command allows you to see all the users that can be seenand the nodes to which they are connected. This command produces essentially the same information as SHOW/CONFIGURATION except that it shows all the duplication ofany routes that might be present It also uses a different formatwhich may not take up quite as much space if you don't have anyloops.BE WARNED: the list that is returned can be VERY long
-show/newconfiguration/node Show all the nodes connected locally
Show all the nodes connected to this node in the new format.
-show/node [<callsign> ...] Show the type and version number of nodes
Show the type and version (if connected) of the nodes specified on thecommand line. If no callsigns are specified then a sorted list of allthe non-user callsigns known to the system will be displayed.
-show/prefix <callsign> Interrogate the prefix database
This command takes the <callsign> (which can be a full or partial callsign or a prefix), looks up which internal country number it is and then displays all the relevant prefixes for that countrytogether with the internal country no, the CQ and ITU regions. See also SHOW/DXCC
-show/program Show the locations of all the included program modules
Show the name and location where every program module was load from. Thisis useful for checking where you think you have loaded a .pm file from.
-show/qra <lat> <long> Convert lat/long to a QRA Grid locator
show/qra <locator> [<locator>] Show distance between QRA Grid locators
show/qrz <callsign> Show any callbook details on a callsign
This command queries the QRZ callbook server on the internetand returns any information available for that callsign. This serviceis provided for users of this software by http://www.qrz.com See also SHOW/WM7D for an alternative.
-show/registered [<prefix>] Show the registered users
show/route <callsign> ... Show the route to the callsign
show/satellite <name> [<hours> <interval>] Show tracking data
show/station all [<regex>] Show list of users in the system
show/station [<callsign> ..] Show information about a callsign
show/sun [ndays] [<prefix>|<callsign>] Show sun rise and set times
show/time [<prefix>|<callsign>] Show the local time
If no prefixes or callsigns are given then this command returns the localtime and UTC as the computer has it right now. If you give some prefixesthen it will show UTC and UTC + the local offset (not including DST) atthe prefixes or callsigns that you specify.
-show/usdb [call ..] Show information held on the FCC Call database
show/vhfstats [days] [date] Show the VHF DX Statistics
Show the VHF DX spots breakdown by band for the last <days> no of days (default is 31), starting from a date (default: today).
-show/vhftable [days] [date] [prefix ...] Show the VHF DX Spotter Table
show/wcy Show last 10 WCY broadcasts
show/wcy <n> Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the system
-show/wm7d <callsign> Show callbook details on a US callsigns
This command queries the WM7D callbook server on the internetand returns any information available for that US callsign. This serviceis provided for users of this software by http://www.wm7d.net.See also SHOW/QRZ.
-show/wwv Show last 10 WWV broadcasts
show/wwv <n> Show last <n> WWV broadcasts
Display the most recent WWV information that has been received by the system
-shutdown Shutdown the cluster
Shutdown the cluster and disconnect all the users
-spoof <call> <command> Do a command as though you are another user
stat/channel [<callsign>] Show the status of a channel on the cluster
Show the internal status of the channel object either for the channel that you are on or else for the callsign that you asked for.Only the fields that are defined (in perl term) will be displayed.
-stat/db <dbname> Show the status of a database
Show the internal status of a database descriptor.Depending on your privilege level you will see more or less information. This command is unlikely to be of much use to anyone other than a sysop.
-stat/msg Show the status of the message system
stat/msg <msgno> Show the status of a message
This command shows the internal status of a message and includes informationsuch as to whom it has been forwarded, its size, origin etc etc.If no message number is given then the status of the message system is displayed.
-stat/route_node <callsign> Show the data in a Route::Node object
stat/route_node all Show list of all Route::Node objects
stat/route_user <callsign> Show the data in a Route::User object
stat/route_user all Show list of all Route::User objects
stat/user [<callsign>] Show the full status of a user
Shows the full contents of a user record including all the secret flagsand stuff.Only the fields that are defined (in perl term) will be displayed.
-sysop Regain your privileges if you login remotely
talk <call> > <node> [<text>] Send a text message to another station via a node
talk <call> [<text>] Send a text message to another station
type <filearea>/<name> Look at the contents of a file in one of the fileareas
uncatchup <node call> all|[msgno> ...] Unmark a message as sent
unset/announce Stop announce messages coming out on your terminal
unset/anntalk Stop talk like announce messages on your terminal
unset/baddx <call>.. Propagate a dx spot with this callsign again
unset/badnode <call>.. Allow spots from this node again
unset/badspotter <call>.. Allow spots from this callsign again
unset/badword <word>.. Propagate things with this word again
unset/beep Stop beeps for DX and other messages on your terminal
unset/debug <name> Remove a debug level from the debug set
unset/dx Stop DX messages coming out on your terminal
unset/dxcq Stop CQ Zones on the end of DX announcements
Display both the Spotter's and the Spotted's CQ Zone on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. The Spotter's CQ is on the RHS of the time, the Spotted's CQ is on the LHS.Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are confused.
-unset/dxgrid Stop QRA Grid Squares on the end of DX announcements
A standard feature which is enabled in version 1.43 and above is that if the spotter's grid square is known it is output on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. You can use this command to reset (or set)this feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which flags you have set if you are confused.
-unset/dxitu Stop ITU Zones on the end of DX announcements
Display both the Spotter's and the Spotted's ITU Zone on the endof a DX announcement (there is just enough room). Some user programscannot cope with this. The Spotter's ITU is on the RHS of the time, the Spotted's ITU is on the LHS.Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATEDo a STAT/USER to see which flags you have set if you are confused.
-unset/echo Stop the cluster echoing your input
If you are connected via a telnet session, different implimentationsof telnet handle echo differently depending on whether you are connected via port 23 or some other port. You can use this commandto change the setting appropriately. The setting is stored in your user profile.YOU DO NOT NEED TO USE THIS COMMAND IF YOU ARE CONNECTED VIA AX25.
-unset/email Stop personal msgs being forwarded by email
unset/here Tell the system you are absent from your terminal
unset/hops <call> ann|spots|route|wwv|wcy Unset hop count
unset/isolate Stop Isolation of a node from the rest of the network
Remove isolation from a node - SET/ISOLATE
-unset/lockout <call> Allow a callsign to connect to the cluster
unset/logininfo Inform when a station logs out locally
unset/password <call> ... Delete (remove) a user's password
This command allows the sysop to completely delete and remove a password for a user.
-unset/privilege Remove any privilege for this session
You can use this command to 'protect' this session from unauthoriseduse. If you want to get your normal privilege back you will need toeither logout and login again (if you are on a console) or use theSYSOP command.
-unset/prompt Set your prompt back to default
unset/register <call> ... Mark a user as not registered
unset/talk Stop TALK messages coming out on your terminal
unset/usstate Stop US State info on the end of DX announcements
If the spotter's or spotted's US State is known it is output on the end of a DX announcement (there is just enough room). A spotter's state will appear on the RHS of the time (like SET/DXGRID) and the spotted's State will appear on the LHS of thetime field. Any information found will override any locator information from SET/DXGRID.Some user programs cannot cope with this. You can use this command to reset (or set) this feature.Conflicts with: SET/DXCQ, SET/DXITUDo a STAT/USER to see which flags you have set if you are confused.
-unset/wcy Stop WCY messages coming out on your terminal
unset/wwv Stop WWV messages coming out on your terminal
unset/wx Stop WX messages coming out on your terminal
who Show who is physically connected
This is a quick listing that shows which callsigns are connected andwhat sort of connection they have
-wx <text> Send a weather message to local users
wx full <text> Send a weather message to all cluster users
wx sysop <text> Send a weather message to other clusters only