<P><CODE><B>set/debug <name></B> Add a debug level to the debug set</CODE>
<P>
-<P>You can remove this level with unset/debug <name>
+<P>You can choose to log several different levels. The levels are
+<P>chan
+state
+msg
+cron
+connect
+<P>You can show what levels you are logging with the <EM>show/debug</EM>
+command.
+<P>You can remove a debug level with unset/debug <name>
<P>
<H2><A NAME="ss13.72">13.72 set/dx (0)</A>
</H2>
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
<P>
-<H2><A NAME="ss13.104">13.104 show/dx (0)</A>
+<H2><A NAME="ss13.104">13.104 show/debug (9)</A>
+</H2>
+
+<P><CODE><B>show/debug</B> Show what levels of debug you are logging</CODE>
+<P>
+<P>The levels can be set with <EM>set/debug</EM>
+<P>
+<H2><A NAME="ss13.105">13.105 show/dx (0)</A>
</H2>
<P><CODE><B>show/dx [options]</B> interrogate the spot database</CODE>
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.105">13.105 show/dxcc (0)</A>
+<H2><A NAME="ss13.106">13.106 show/dxcc (0)</A>
</H2>
<P><CODE><B>show/dxcc <prefix></B> Interrogate the spot database by country</CODE>
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.106">13.106 show/files (0)</A>
+<H2><A NAME="ss13.107">13.107 show/files (0)</A>
</H2>
<P><CODE><B>show/files [<filearea> [<string>]]</B> List
</CODE></BLOCKQUOTE>
<P>See also TYPE - to see the contents of a file.
<P>
-<H2><A NAME="ss13.107">13.107 show/filter (0)</A>
+<H2><A NAME="ss13.108">13.108 show/filter (0)</A>
</H2>
<P><CODE><B>show/filter</B> Show the filters you have set</CODE>
<P>Show the contents of all the filters that are set by you. This command
displays all the filters set - for all the various categories.
<P>
-<H2><A NAME="ss13.108">13.108 show/filter (extended for sysops) (5)</A>
+<H2><A NAME="ss13.109">13.109 show/filter (extended for sysops) (5)</A>
</H2>
<P><CODE><B>show/filter <callsign></B> Show the filters set by <callsign></CODE>
<P>
<P>A sysop can look at any filters that have been set.
<P>
-<H2><A NAME="ss13.109">13.109 show/hops (8)</A>
+<H2><A NAME="ss13.110">13.110 show/hops (8)</A>
</H2>
<P><CODE><B>show/hops <node_call> [ann|spots|wcy|wwv|]</B> Show the hop counts for a node</CODE>
which category you want to see. If you leave the category out then
all the categories will be listed.
<P>
-<H2><A NAME="ss13.110">13.110 show/isolate (1)</A>
+<H2><A NAME="ss13.111">13.111 show/isolate (1)</A>
</H2>
<P><CODE><B>show/isolate</B> Show a list of isolated nodes</CODE>
<P>
<P>Show which nodes are currently set to be isolated.
<P>
-<H2><A NAME="ss13.111">13.111 show/lockout (9)</A>
+<H2><A NAME="ss13.112">13.112 show/lockout (9)</A>
</H2>
<P><CODE><B>show/lockout</B> Show a list of excluded callsigns</CODE>
<P>Show a list of callsigns that have been excluded (locked out) of the
cluster locally with the <EM>set/lockout</EM> command
<P>
-<H2><A NAME="ss13.112">13.112 show/log (8)</A>
+<H2><A NAME="ss13.113">13.113 show/log (8)</A>
</H2>
<P><CODE><B>show/log [<callsign>]</B> Show excerpts from the system log</CODE>
it will output a general logfile. With the optional callsign it will
show output from the log associated with that callsign.
<P>
-<H2><A NAME="ss13.113">13.113 show/moon (0)</A>
+<H2><A NAME="ss13.114">13.114 show/moon (0)</A>
</H2>
<P><CODE><B>show/moon [<prefix>|<callsign>]</B> Show moon
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.114">13.114 show/muf (0)</A>
+<H2><A NAME="ss13.115">13.115 show/muf (0)</A>
</H2>
<P><CODE><B>show/muf <prefix> [<hours>][long]</B> Show
should be noted that the figures will probably not be very useful, nor
terrible accurate, but it is included for completeness.
<P>
-<H2><A NAME="ss13.115">13.115 show/node (1)</A>
+<H2><A NAME="ss13.116">13.116 show/node (1)</A>
</H2>
<P><CODE><B>show/node [<node_call> ...]</B> Show the type and version
command line. If no callsigns are specified then a sorted list of all
the non-user callsigns known to the system will be displayed.
<P>
-<H2><A NAME="ss13.116">13.116 show/prefix (0)</A>
+<H2><A NAME="ss13.117">13.117 show/prefix (0)</A>
</H2>
<P><CODE><B>show/prefix <callsign></B> Interrogate the prefix database</CODE>
<P>See also SHOW/DXCC
<P>
<P>
-<H2><A NAME="ss13.117">13.117 show/program (5)</A>
+<H2><A NAME="ss13.118">13.118 show/program (5)</A>
</H2>
<P><CODE><B>show/program</B> Show the locations of all the included program modules</CODE>
<P>Show the name and location where every program module was load from. This
is useful for checking where you think you have loaded a .pm file from.
<P>
-<H2><A NAME="ss13.118">13.118 show/qra (0)</A>
+<H2><A NAME="ss13.119">13.119 show/qra (0)</A>
</H2>
<P><CODE><B>show/qra <locator> [<locator>]</B> Show the distance
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.119">13.119 show/qrz (0)</A>
+<H2><A NAME="ss13.120">13.120 show/qrz (0)</A>
</H2>
<P><CODE><B>show/qrz <callsign></B> Show any callbook details on a callsign</CODE>
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qrz.com
<P>
-<H2><A NAME="ss13.120">13.120 show/route (0)</A>
+<H2><A NAME="ss13.121">13.121 show/route (0)</A>
</H2>
<P><CODE><B>show/route <callsign></B> Show the route to <callsign></CODE>
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.121">13.121 show/satellite (0)</A>
+<H2><A NAME="ss13.122">13.122 show/satellite (0)</A>
</H2>
<P><CODE><B>show/satellite <name> [<hours> <interval>]</B>
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.122">13.122 show/sun (0)</A>
+<H2><A NAME="ss13.123">13.123 show/sun (0)</A>
</H2>
<P><CODE><B>show/sun [<prefix>|<callsign>]</B> Show
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.123">13.123 show/time (0)</A>
+<H2><A NAME="ss13.124">13.124 show/time (0)</A>
</H2>
<P><CODE><B>show/time [<prefix>|<callsign>]</B> Show
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
<P>
-<H2><A NAME="ss13.124">13.124 show/wcy (0)</A>
+<H2><A NAME="ss13.125">13.125 show/wcy (0)</A>
</H2>
<P><CODE><B>show/wcy</B> Show the last 10 WCY broadcasts<BR>
<P>
<P>Display the most recent WCY information that has been received by the system
<P>
-<H2><A NAME="ss13.125">13.125 show/wwv (0)</A>
+<H2><A NAME="ss13.126">13.126 show/wwv (0)</A>
</H2>
<P><CODE><B>show/wwv</B> Show the last 10 WWV broadcasts<BR>
<P>Display the most recent WWV information that has been received by the system
<P>
<P>
-<H2><A NAME="ss13.126">13.126 shutdown (5)</A>
+<H2><A NAME="ss13.127">13.127 shutdown (5)</A>
</H2>
<P><CODE><B>shutdown</B> Shutdown the cluster</CODE>
<P>Shutdown the cluster and disconnect all the users. If you have Spider
set to respawn in /etc/inittab it will of course restart.
<P>
-<H2><A NAME="ss13.127">13.127 spoof (9)</A>
+<H2><A NAME="ss13.128">13.128 spoof (9)</A>
</H2>
<P><CODE><B>spoof <callsign> <command></B> Run commands as another user</CODE>
kind of things that users seem to always get wrong.. like home_node for
example.
<P>
-<H2><A NAME="ss13.128">13.128 stat/db (5)</A>
+<H2><A NAME="ss13.129">13.129 stat/db (5)</A>
</H2>
<P><CODE><B>stat/db <dbname></B> Show the status of a database</CODE>
<P>Depending on your privilege level you will see more or less information.
This command is unlikely to be of much use to anyone other than a sysop.
<P>
-<H2><A NAME="ss13.129">13.129 stat/channel (5)</A>
+<H2><A NAME="ss13.130">13.130 stat/channel (5)</A>
</H2>
<P><CODE><B>stat/channel <callsign></B> Show the status of a channel on the cluster</CODE>
you are on or else for the callsign that you asked for.
<P>Only the fields that are defined (in perl term) will be displayed.
<P>
-<H2><A NAME="ss13.130">13.130 stat/msg (5)</A>
+<H2><A NAME="ss13.131">13.131 stat/msg (5)</A>
</H2>
<P><CODE><B>stat/msg <msgno></B> Show the status of a message</CODE>
<P>This command shows the internal status of a message and includes information
such as to whom it has been forwarded, its size, origin etc etc.
<P>
-<H2><A NAME="ss13.131">13.131 stat/user (5)</A>
+<H2><A NAME="ss13.132">13.132 stat/user (5)</A>
</H2>
<P><CODE><B>stat/user <callsign></B> Show the full status of a user</CODE>
and stuff.
<P>Only the fields that are defined (in perl term) will be displayed.
<P>
-<H2><A NAME="ss13.132">13.132 sysop (0)</A>
+<H2><A NAME="ss13.133">13.133 sysop (0)</A>
</H2>
<P><CODE><B>sysop</B> Regain your privileges if you login remotely</CODE>
numbers but nothing will happen when you input a string. Any match is
case sensitive.
<P>
-<H2><A NAME="ss13.133">13.133 talk (0)</A>
+<H2><A NAME="ss13.134">13.134 talk (0)</A>
</H2>
<P><CODE><B>talk <callsign></B> Enter talk mode with <callsign><BR>
</PRE>
</CODE></BLOCKQUOTE>
<P>
-<H2><A NAME="ss13.134">13.134 type (0)</A>
+<H2><A NAME="ss13.135">13.135 type (0)</A>
</H2>
<P><CODE><B>type <filearea>/<name></B> Look at a file in one of the fileareas</CODE>
<P>See also SHOW/FILES to see what fileareas are available and a
list of content.
<P>
-<H2><A NAME="ss13.135">13.135 who (0)</A>
+<H2><A NAME="ss13.136">13.136 who (0)</A>
</H2>
<P><CODE><B>who</B> Show who is physically connected locally</CODE>
<P>This is a quick listing that shows which callsigns are connected and
what sort of connection they have
<P>
-<H2><A NAME="ss13.136">13.136 wx (0)</A>
+<H2><A NAME="ss13.137">13.137 wx (0)</A>
</H2>
<P><CODE><B>wx <text></B> Send a weather message to local users<BR>
<P>Weather messages can sometimes be useful if you are experiencing an extreme
that may indicate enhanced conditions
<P>
-<H2><A NAME="ss13.137">13.137 wx (enhanced for sysops) (5)</A>
+<H2><A NAME="ss13.138">13.138 wx (enhanced for sysops) (5)</A>
</H2>
<P><CODE><B>wx sysop <text></B> Send a weather message to other clusters only</CODE>
projects / spider.git / blobdiff