Order is not important.
+=== 0^CHAT <group> <text>^Chat or Conference to a group
+It is now possible to JOIN a group and have network wide conferencing to that
+group. DXSpider does not (and probably will not) implement the AK1A
+conference mode as this seems very limiting, is hardly used and doesn't seem
+to work too well anyway.
+
+This system uses the existing ANN system and is compatible with both other
+DXSpider nodes and AK1A clusters (they use ANN/<group>).
+
+You can be a member of as many "groups" as you want. To join a group type:-
+
+ JOIN FOC (where FOC is the group name)
+
+To leave a group type:-
+
+ LEAVE FOC
+
+You can see which groups you are in by typing:-
+
+ STAT/USER
+
+and you can see whether your mate is in the group, if he connects to the
+same node as you, by typing:-
+
+ STAT/USER g1tlh
+
+To send a message to a group type:-
+
+ CHAT FOC hello everyone
+
+or
+
+ CH #9000 hello I am back
+
+See also JOIN, LEAVE, SHOW/CHAT
+
=== 0^CLEAR/ANNOUNCE [1|all]^Clear a announce filter line
This command allows you to clear (remove) a line in a annouce filter or to
remove the whole filter.
=== 9^DBCREATE <name>^Create a database entry
=== 9^DBCREATE <name> chain <name> [<name>..]^Create a chained database entry
=== 9^DBCREATE <name> remote <node>^Create a remote database entry
+=== 9^DBCREATE <name> cmd <dxspider command>^make a local command available as a DB
DBCREATE allows you to define a database in the system. It doesn't actually
create anything, just defines it.
to work as they may be used to.
+You can also make local commands available as 'pseudo' databases. You
+can therefore make spider special commands available as a database. I
+imagine that this will be primarily useful for remote access from
+legacy nodes. For example:-
+
+ DBCREATE dxqsl cmd show/dxqsl
+
+You also use one of these databases in a chain. This may be useful
+locally.
+
See DBIMPORT for the importing of existing AK1A format data to databases.
See DBSHOW for generic database enquiry
effects. Commands are run at the privilege of the user which is being
demonstrated to.
+=== 0^JOIN <group>^Join a chat or conference group
+JOIN allows you to join a network wide conference group. To join a
+group (called FOC in this case) type:-
+
+ JOIN FOC
+
+See also CHAT, LEAVE, SHOW/CHAT
+
=== 0^KILL <msgno> [<msgno..]^Delete a message from the local system
=== 0^KILL <from msgno>-<to msgno>^Delete a range of messages
=== 0^KILL from <regex>^Delete messages FROM a callsign or pattern
It otherwise is used in the same way as the KILL command.
+=== 0^LEAVE <group>^Leave a chat or conference group
+LEAVE allows you to leave a network wide conference group. To leave a
+group (called FOC in this case) type:-
+
+ LEAVE FOC
+
+See also CHAT, JOIN, SHOW/CHAT
+
=== 0^LINKS^Show which nodes is physically connected
This is a quick listing that shows which links are connected and
some information about them. See WHO for a list of all connections.
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
+=== 0^SET/DXCQ^Show CQ Zones on the end of DX announcements
+=== 0^UNSET/DXCQ^Stop CQ Zones on the end of DX announcements
+Display both the Spotter's and the Spotted's CQ Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's CQ is on the RHS of the
+time, the Spotted's CQ is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXITU, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
+=== 0^SET/DXITU^Show ITU Zones on the end of DX announcements
+=== 0^UNSET/DXITU^Stop ITU Zones on the end of DX announcements
+Display both the Spotter's and the Spotted's ITU Zone on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. The Spotter's ITU is on the RHS of the
+time, the Spotted's ITU is on the LHS.
+
+Conflicts with: SET/DXGRID, SET/DXCQ, SHOW/USSTATE
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
=== 0^SET/DXGRID^Allow QRA Grid Squares on the end of DX announcements
=== 0^UNSET/DXGRID^Stop QRA Grid Squares on the end of DX announcements
A standard feature which is enabled in version 1.43 and above is
cannot cope with this. You can use this command to reset (or set)
this feature.
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
=== 5^SET/DXNET <call> [<call>..]^Make the callsign an DXNet node
=== 0^SET/ECHO^Make the cluster echo your input
see also DELETE/USDB
-=== 0^SET/DXSTATE^Allow US State info on the end of DX announcements
-=== 0^UNSET/DXSTATE^Stop US State info on the end of DX announcements
+=== 0^SET/USSTATE^Allow US State info on the end of DX announcements
+=== 0^UNSET/USSTATE^Stop US State info on the end of DX announcements
If the spotter's or spotted's US State is known it is output on the
end of a DX announcement (there is just enough room).
Some user programs cannot cope with this. You can use this command
to reset (or set) this feature.
+Conflicts with: SET/DXCQ, SET/DXITU
+
+Do a STAT/USER to see which flags you have set if you are confused.
+
=== 0^SET/WCY^Allow WCY messages to come out on your terminal
=== 0^UNSET/WCY^Stop WCY messages coming out on your terminal
Display all the bad words in the system, see SET/BADWORD
for more information.
+=== 0^SHOW/CHAT [<group>] [<lines>]^Show any chat or conferencing
+This command allows you to see any chat or conferencing that has
+occurred whilst you were away. SHOW/CHAT on its own will show data for
+all groups. If you use a group name then it will show only chat for
+that group.
+
=== 0^SHOW/CONFIGURATION [<node>]^Show all the nodes and users visible
This command allows you to see all the users that can be seen
and the nodes to which they are connected.
This command shows information on all the active connections known to
the node. This command gives slightly more information than WHO.
+=== 0^SHOW/CONTEST <year and month>^Show all the contests for a month
+Show all known contests which are maintained at http://www.sk3bg.se/contest/
+for a particular month or year. The format is reasonably flexible.
+For example:-
+
+ SH/CONTEST sep2003
+ SH/CONTEST 03 march
+
=== 0^SHOW/DATE [<prefix>|<callsign>]^Show the local time
This is very nearly the same as SHOW/TIME, the only difference the format
of the date string if no arguments are given.
then it will show UTC and UTC + the local offset (not including DST) at
the prefixes or callsigns that you specify.
+=== 0^SHOW/DB0SDX <callsign>^Show QSL infomation from DB0SDX database
+This command queries the DB0SDX QSL server on the internet
+and returns any information available for that callsign. This service
+is provided for users of this software by http://www.qslinfo.de.
+
+See also SHOW/QRZ, SHOW/WM7D.
+
=== 9^SHOW/DEBUG^Show what levels of debug information you are logging
=== 0^SHOW/DX^Interrogate the spot database
and returns any information available for that callsign. This service
is provided for users of this software by http://www.qrz.com
+See also SHOW/WM7D for an alternative.
+
+=== 0^SHOW/DXQSL <callsign>^Show any QSL info gathered from spots
+The node collects information from the comment fields in spots (things
+like 'VIA EA7WA' or 'QSL-G1TLH') and stores these in a database.
+
+This command allows you to interrogate that database and if the callsign
+is found will display the manager(s) that people have spotted. This
+information is NOT reliable, but it is normally reasonably accurate if
+it is spotted enough times.
+
+For example:-
+
+ sh/dxqsl 4k9w
+
+You can check the raw input spots yourself with:-
+
+ sh/dx 4k9w qsl
+
+This gives you more background information.
+
=== 9^SHOW/REGISTERED [<prefix>]^Show the registered users
=== 0^SHOW/ROUTE <callsign> ...^Show the route to the callsign
=== 0^SHOW/WCY^Show last 10 WCY broadcasts
=== 0^SHOW/WCY <n>^Show last <n> WCY broadcasts
Display the most recent WCY information that has been received by the system
+
+=== 0^SHOW/WM7D <callsign>^Show callbook details on a US callsigns
+This command queries the WM7D callbook server on the internet
+and returns any information available for that US callsign. This service
+is provided for users of this software by http://www.wm7d.net.
+
+See also SHOW/QRZ.
=== 0^SHOW/WWV^Show last 10 WWV broadcasts
=== 0^SHOW/WWV <n>^Show last <n> WWV broadcasts
projects / spider.git / blobdiff