EXPORT 2345 /tmp/a
+=== 9^EXPORT_USERS [<filename>]^Export the users database to ascii
+Export the users database to a file in ascii format. If no filename
+is given then it will export the file to /spider/data/user_asc.
+
+If the file already exists it will be renamed to <filename>.o. In fact
+up to 5 generations of the file can be kept each one with an extra 'o' on the
+suffix.
+
+BE WARNED: this will write to any file you have write access to. No check is
+made on the filename (if any) that you specify.
=== 1^FORWARD/OPERNAME <call>^Send out information on this <call> to all clusters
This command sends out any information held in the user file which can
for the <string> you specify and give you a list of likely commands
to look at with HELP.
+=== 5^INIT <node>^Re-initialise a link to an AK1A compatible node
+This command attempts to re-initialise a link to a (usually) AK1A node
+that has got confused, usually by a protocol loop of some kind. It may
+work - but you usually will be better off simply disconnecting it (or
+better, if it is a real AK1A node, doing an RCMD <node> DISC/F <your
+node>).
+
+Best of luck - you will need it.
+
=== 0^KILL <msgno> [<msgno..]^Delete a message from the local system
-Delete a message from the local system. You will only be able to delete messages
-that you have originated or been sent (unless you are the sysop).
+Delete a message from the local system. You will only be able to
+delete messages that you have originated or been sent (unless you are
+the sysop).
=== 5^KILL FULL <msgno> [<msgno..]^Delete a message from the whole cluster
Delete a message (usually a 'bulletin') from the whole cluster system.
-This uses the subject field, so any messages that have exactly the same subject
-will be deleted. Beware!
+This uses the subject field, so any messages that have exactly the
+same subject will be deleted. Beware!
=== 0^LINKS^Show which nodes is physically connected
This is a quick listing that shows which links are connected and
some information about them. See WHO for a list of all connections.
=== 9^LOAD/ALIASES^Reload the command alias table
-Reload the /spider/cmd/Aliases file after you have editted it. You will need to
-do this if you change this file whilst the cluster is running in order for the
-changes to take effect.
+Reload the /spider/cmd/Aliases file after you have editted it. You
+will need to do this if you change this file whilst the cluster is
+running in order for the changes to take effect.
=== 9^LOAD/BANDS^Reload the band limits table
Reload the /spider/data/bands.pl file if you have changed it manually whilst
the cluster is running.
=== 9^LOAD/CMD_CACHE^Reload the automatic command cache
-Normally, if you change a command file in the cmd or local_cmd tree it will
-automatially be picked up by the cluster program. Sometimes it can get confused
-if you are doing a lot of moving commands about or delete a command in the
-local_cmd tree and want to use the normal one again. Execute this command to
-reset everything back to the state it was just after a cluster restart.
+Normally, if you change a command file in the cmd or local_cmd tree it
+will automatially be picked up by the cluster program. Sometimes it
+can get confused if you are doing a lot of moving commands about or
+delete a command in the local_cmd tree and want to use the normal one
+again. Execute this command to reset everything back to the state it
+was just after a cluster restart.
=== 9^LOAD/MESSAGES^Reload the system messages file
-If you change the /spider/perl/Messages file (usually whilst fiddling/writing new
-commands) you can have them take effect during a cluster session by executing this
-command. You need to do this if get something like :-
+If you change the /spider/perl/Messages file (usually whilst
+fiddling/writing new commands) you can have them take effect during a
+cluster session by executing this command. You need to do this if get
+something like :-
unknown message 'xxxx' in lang 'en'
=== 9^LOAD/PREFIXES^Reload the prefix table
-Reload the /spider/data/prefix_data.pl file if you have changed it manually whilst
-the cluster is running.
+Reload the /spider/data/prefix_data.pl file if you have changed it
+manually whilst the cluster is running.
=== 5^MERGE <node> [<no spots>/<no wwv>]^Ask for the latest spots and WWV
MERGE allows you to bring your spot and wwv database up to date. By default
This will display more information on the message than DIR does.
=== 8^PC <call> <text>^Send text (eg PC Protocol) to <call>
-Send some arbitrary text to a locally connected callsign. No processing is done on
-the text. This command allows you to send PC Protocol to unstick things if problems
-arise (messages get stuck etc). eg:-
+Send some arbitrary text to a locally connected callsign. No
+processing is done on the text. This command allows you to send PC
+Protocol to unstick things if problems arise (messages get stuck
+etc). eg:-
+
pc gb7djk PC33^GB7TLH^GB7DJK^400^
or
pc G1TLH Try doing that properly!!!
=== 0^SET/DX^Allow DX messages to come out on your terminal
=== 0^UNSET/DX^Stop DX messages coming out on your terminal
+=== 0^SET/DXGRID^Allow Grid Squares on the end of DX announcements
+=== 0^UNSET/DXGRID^Stop Grid Squares on the end of DX announcements
+A standard feature which is enabled in version 1.43 and above is
+that if the spotter's grid square is known it is output on the end
+of a DX announcement (there is just enough room). Some user programs
+cannot cope with this. You can use this command to reset (or set)
+this feature.
+
=== 0^SET/ECHO^Make the cluster echo your input
=== 0^UNSET/ECHO^Stop the cluster echoing your input
If you are connected via a telnet session, different implimentations
numbers but nothing will happen when you input a string. Any match is
case sensitive.
-=== 0^TALK <call> <text>^Send a text message to another station
-=== 0^TALK <call> > <node> <text>^Send a text message to another station via a node
+=== 0^TALK <call> [<text>]^Send a text message to another station
+=== 0^TALK <call> > <node> [<text>]^Send a text message to another station via a node
Send a short message to any other station that is visible on the cluster
system. You can send it to anyone you can see with a SHOW/CONFIGURATION
command, they don't have to be connected locally.
see GB7TLH in the SH/C list but with no users, then you would use the
second form of the talk message.
+If you want to have a ragchew with someone you can leave the text message
+out and the system will go into 'Talk' mode. What this means is that a
+short message is sent to the recipient telling them that you are in a
+'Talking' frame of mind and then you just type - everything you send will
+go to the station that you asked for.
+
+All the usual announcements, spots and so on will still come out on your
+terminal.
+
+If you want to do something (such as send a spot) you preceed the normal
+command with a '/' character, eg:-
+
+ /DX 14001 G1TLH What's a B class licensee doing on 20m CW?
+ /HELP talk
+
+To leave talk mode type:
+
+ /EX
+
=== 0^TYPE <filearea>/<name>^Look at the contents of a file in one of the fileareas
Type out the contents of a file in a filearea. So, for example, in
filearea 'bulletins' you want to look at file 'arld051' you would
projects / spider.git / blobdiff